SUNSHINE TB-10 Pro

Contents

SUNSHINE TB-10 Pro Handheld Thermal Imaging Multimeter Instruction Manual

Model: TB-10 Pro | Brand: SUNSHINE

Introduction

The SUNSHINE TB-10 Pro is a versatile handheld device combining an infrared thermal imager and a digital multimeter. Designed for professionals in mobile phone repair, PCB motherboard testing, and electronic research and development, it offers high-definition thermal imaging, precise electrical measurements, and a range of smart features to aid in fault detection and analysis.

SUNSHINE TB-10 Pro product and accessories
The SUNSHINE TB-10 Pro handheld thermal imaging multimeter with included test leads, USB cable, and carrying case.

Package Contents

Please verify that all items are present in your package:

  • SUNSHINE TB-10 Pro Handheld Thermal Imaging Multimeter
  • Test Leads (Red and Black)
  • USB Type-C Cable
  • Carrying Case
  • User Manual (this document)

Setup

1. Battery Installation

The TB-10 Pro uses a built-in removable 18650 lithium battery. Ensure the battery is correctly inserted before first use. The device supports Type-C charging.

Image showing Type-C charging and battery compartment
The TB-10 Pro features a built-in removable 18650 lithium battery and Type-C charging port.

2. Power On/Off

To power on the device, long-press the side power button. The device will boot up and enter the operation mode. To power off, long-press the side power button again.

Demonstration of powering on the TB-10 Pro and navigating its initial interface.

3. Language Settings

After turning on the device, you can set the language. Long-press the menu button (labeled "IR/DMM MENU") to access the settings. Navigate to the language option and select your preferred language. Multiple languages are supported, including Chinese, English, German, Russian, French, Spanish, Portuguese, Korean, Japanese, Italian, and Polish.

Operating Instructions

Device Overview and Controls

Detailed diagram of SUNSHINE TB-10 Pro buttons and screen annotations
Key controls and screen indicators of the TB-10 Pro.
  • Side Power Button: Long press for 3 seconds to power on/off.
  • IR/DMM MENU Button: Long press to set language and other system settings. Short press to switch between Multimeter functions.
  • SELECT Button: Short press to switch multimeter gear. Long press to switch pseudo color in thermal imaging mode.
  • RANGE/REC Button: Short press for data retention (HOLD). Long press for screenshot save/waveform data.
  • HOLD/SAVE Button: Short press for manual gear/relative value. Long press for switch button function.
  • A Input Port: For AC or DC current measurement.
  • COM Input Port: Common measurement input port.
  • VΩ)) Input Port: For voltage, resistance, diode, temperature, capacitance, frequency measurement.

1. Thermal Imaging Mode

The TB-10 Pro features a 256*192 high-definition resolution thermal imager, capable of detecting 49152 points simultaneously. It visualizes thermal images, locates temperature measurement points, and quickly detects faults.

Thermal imaging display showing highest, lowest, and center temperature points
Full-screen temperature measurement with highest, lowest, and center temperature points indicated.
  • High and Low Temperature Tracking: Automatically tracks cold and hot spots, aiding in fault detection.
  • Full-screen Temperature Measurement: Visualizes thermal images and pinpoints temperature measurement points.
  • Macro Lens: A switchable macro lens at the back allows for detailed inspection of tiny components (1mm*1mm). Slide the macro lens left and right to switch between modes.
Comparison of thermal images with and without macro lens
The macro lens provides enhanced detail for small components.
  • Color Palette Modes: The device offers 15 color palette modes for different visualization needs. Long-press the menu button to access settings and switch between these modes.
Screen showing 15 different color palette options for thermal imaging
Choose from 15 color palettes for optimal thermal image interpretation.

2. Multimeter Mode

The TB-10 Pro functions as an intelligent and precise automatic range multimeter. It supports various measurements essential for electronic maintenance and development.

Multimeter functions and test leads
Multimeter functions include AC/DC voltage, AC/DC current, resistance, capacitance, on/off buzzer, diode, frequency, data retention, temperature, and live wire detection.
  • Switching to Multimeter Functions: Press the menu button (IR/DMM MENU) to switch to multimeter functions.
  • Connecting Test Leads: Connect the red and black test leads to the appropriate input ports (VΩ)) for voltage/resistance/etc., A for current, COM for common).
  • Measurement Mode Selection: Use the right button (likely SELECT or RANGE) to switch between different measurement modes (Voltage, Current, Resistance, Capacitance, Frequency, Diode, etc.).
  • Live Wire Identification: In multimeter mode, switch to the LIVE position to distinguish between neutral and live wires.
  • Non-contact AC Voltage Sensing (NCV): The device provides sensitive sensing, interface prompts, and an accompanying beep to detect AC voltage without contact, reducing the risk of electric shock.
  • Intelligent Anti-burning: Features intelligent anti-burning protection for enhanced safety.
Features including multi-language, live wire identification, NCV, USB image reading, and Type-C charging
Key features of the TB-10 Pro, including live wire identification and NCV.

3. Data Management

  • USB Fast Image Reading: Connect the device to a computer via USB to reproduce data, quickly view stored images, and charge the device.
USB fast image reading feature
The device supports USB connectivity for data transfer and charging.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Battery Care: The built-in 18650 lithium battery provides long-lasting power. For optimal battery life, avoid extreme temperatures and fully charge the device before long periods of storage.
  • Storage: Store the device in its carrying case in a cool, dry place when not in use.

Troubleshooting

If you encounter any issues with your SUNSHINE TB-10 Pro, please refer to the following common troubleshooting steps:

  • Device not powering on: Ensure the battery is charged. Connect the device to a power source using the Type-C cable and try again.
  • Incorrect readings in multimeter mode: Check that the test leads are correctly connected to the appropriate ports and that the correct measurement mode is selected. Ensure the probes are making good contact with the circuit.
  • Thermal image unclear or inaccurate: Ensure the macro lens is in the correct position for your application (switched on for close-up, off for wider view). Check for any obstructions on the thermal camera lens.
  • Device unresponsive: Try performing a soft reset by long-pressing the power button until the device turns off, then power it back on.

For further assistance, please contact technical support.

Specifications

Detailed specifications table for SUNSHINE TB-10 Pro
Detailed technical specifications of the SUNSHINE TB-10 Pro.
SUNSHINE TB-10 Pro Specifications
ParameterValue
BrandSUNSHINE
Product NameHandheld thermal imager
ModelTB-10 Pro
Product Size134*54*28mm
Packing Size146*175*55mm
Net Weight≈198g
Gross Weight≈390g
Display Screen3.5-inch 320*480 resolution
USB InterfaceType-C USB
TF Card (Maximum support)64G
Image FormatBMP file
BatteryRemovable 18650 lithium battery
Storage Temperature-20~60℃ (-4~140℉)
Operating Temperature0~50℃ (32~122℉)
Operating Humidity<85%RH (non-condensing)
SensorUncooled vanadium oxide (VOx)
Image Capture Frequency25Hz
Infrared Pixel256*192
Display Image Resolution427*320
Field of View (FOV)50.0° (H)*37.2° (V)
Emissivity0.1-0.99 adjustable, default 0.95
Temperature Range-20℃~+550℃
ModeAutomatic gain
Color PlateWhite heat/black heat/fusion 1/rainbow/fusion 2/iron red 1/iron red 2/dark brown/color 1/color 2/ice fire/rain/green heat/red heat/dark blue
Measurement Temperature Error±2℃ or ±2℃
Display Temperature Resolution0.1℃/0.1℉
DC Maximum Input Voltage1000V
AC Maximum Input Voltage750V
Maximum Current Measurement Range10A
Resistance Maximum Measurement Range99.99MΩ
Capacitance Maximum Measurement Range199.99mF
Duty Cycle Measurement Range0.1%~99.9%
Diode Measurement Range0V~3V
Frequency MeasurementSupported (specific range not clearly defined in source)
Display Digits19999 words updated about 3 times per second
ConfigurationHost*1/Type-C cable*1/USB-024B test lead*1/Storage bag*1/Instruction manual*1/Certificate*1

User Tips

Based on user feedback and common questions, here are some tips for getting the most out of your TB-10 Pro:

  • Macro Lens for Fine Details: Remember to slide the macro lens into position when inspecting very small components on PCBs for clearer thermal images.
  • Language Selection: If the device boots up in an unfamiliar language, long-press the menu button to access settings and change the language to English or your preferred option.
  • Multimeter Mode Switching: The right button (SELECT or RANGE) is crucial for cycling through different measurement types in multimeter mode. Familiarize yourself with its function to quickly switch between voltage, resistance, current, etc.
  • Live Wire Detection: Utilize the LIVE function in multimeter mode for safe and accurate identification of live wires.

Warranty and Support

For any technical inquiries, warranty claims, or support needs, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 SUNSHINE. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.