Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the FY-ODM-08W Tuya Smart WiFi Control Board. This control board is designed to integrate with existing sliding door motors, enabling smart control via WiFi and remote controls. It supports a wide range of sliding door motors and offers various adjustable functions for optimal performance and safety.
Key Features
- Integrated WiFi Module for smart control via Tuya Smart Life app.
- Compatibility with 90% of sliding door motors on the market.
- Adjustable timing and delayed door closing.
- Slow stop force adjustment (MT_T).
- Motor force adjustment (TORQUE).
- Adjustable force when encountering obstacles (CL FORCE).
- Timed automatic door closing (ATO CL).
- Maximum power start (MAX START).
- Rebound when encountering obstacles (CLS FORCE).
- Slow stop when opening/closing the door (SOFT STOP).
- Remote control operation selection (1 button/3 buttons).
- Dedicated interface for warning light.
- High quality knobs and custom stabilized transformer.
- Super reception module and signal booster antenna.
Specifications
| Attribute | Value |
|---|---|
| Model Number | FY-ODM-08W |
| Type | Hand Tool Parts (Control Board) |
| Origin | Mainland China, Guangdong |
| Warranty | 1 Year |
| Material | Plastic |
| Application | Sliding door motor |
| Product Name | Sliding gate motor control board |
| Usage | Door Controller |
| Control Mode | WiFi/RF |
| Power Supply | 220VAC/110VAC |
| WiFi Application | TUYA smart life |
| Applicable Motor | Sliding gate motor |
| Operating Temperature | -45~65°C |
| Maximum Supported | 1500W Sliding gate motor |
Setup Guide
Before proceeding with installation, ensure the power supply to your sliding door motor is disconnected. It is recommended that installation be performed by a qualified technician.
1. Component Identification
Familiarize yourself with the control board's components and connection points. Refer to the detailed diagram below:

Key labeled points on the board (referencing Figure 1):
- 1. TIMER: Knob for timing and delayed door closing adjustment.
- 2. MT_T: Knob for slow stop force adjustment.
- 3. TORQUE: Knob for motor force adjustment.
- 4. CL FORCE: Knob to adjust force when encountering obstacles.
- 5. ATO CL: DIP switch for timed automatic door closing (open or close).
- 6. MAX START: DIP switch for maximum power start (open or close).
- 7. CLS FORCE: DIP switch for rebound when encountering obstacles (open or close).
- 8. SOFT STOP: DIP switch for slow stop when opening/closing the door (open or close).
- 9. RF ONE: DIP switch for remote control 1 button/3 buttons operation selection.
- 10. ONE MT T: DIP switch for (1) single key cycle (2) slow stop setting.
- 11. LMT DIRECTION: Jumper/setting for changing the direction of the gate travel.
- 12. MOTO DIRECTION: Jumper/setting for changing the direction of motor operation.
- 13. STUDY: Button for learning remote controls.
- 14-22: Interface for control signals (e.g., limit switches, safety sensors).
- 23-25: Power connector (PE, N, L).
- 26. OPEN: Terminal for opening signal.
- 27. STOP: Terminal for stop signal.
- 28. CLS: Terminal for closing signal.
- 29. Alarm Lamp: Interface for alarm lamp.
- 30. Normally Open/Closed Switch: Terminals for normally open/closed switch.
- 31. WIFI Module Interface: Connector for the WiFi module.
2. Wiring the Control Board
Connect the control board to your sliding door motor and power supply according to the following guidelines. Ensure all connections are secure and correctly polarized.
- Power Supply (23-25): Connect your 220VAC/110VAC power supply to the designated PE, N, and L terminals. Ensure the correct voltage is used as per your motor's requirements.
- Motor Connections (MOTO, COM): Connect your sliding gate motor's wires to the MOTO and COM terminals. Refer to your motor's manual for specific wiring.
- Limit Switches (LMT1, LMT2): Connect your gate's limit switches to LMT1 and LMT2 terminals. These define the open and closed positions of the gate.
- Warning Light (29): Connect an external warning light to the Alarm Lamp interface.
- Control Inputs (26, 27, 28): Connect external control devices (e.g., push buttons, keypads) to the OPEN, STOP, and CLS terminals for manual operation.
- Safety Sensors (e.g., Infrared): Connect safety sensors to the appropriate terminals (e.g., GND, LMT1/LMT2, or dedicated safety input if available, not explicitly numbered but implied by "Interface to control").

3. DIP Switch and Knob Adjustments
Adjust the DIP switches and knobs (1-10 in Figure 1) to configure the control board's behavior:
- TIMER (1): Rotate to set the desired timing for delayed door closing.
- MT_T (2): Rotate to adjust the slow stop force of the motor.
- TORQUE (3): Rotate to adjust the overall motor force.
- CL FORCE (4): Rotate to set the force at which the gate reacts to obstacles during closing.
- DIP Switches (5-10): Toggle these switches to enable or disable specific functions like automatic closing, maximum power start, obstacle rebound, slow stop, and remote control button configuration. Refer to the labels on the board for each switch's function.
- LMT DIRECTION (11) & MOTO DIRECTION (12): Adjust these jumpers or settings to ensure the gate travels in the correct direction relative to the open/close commands.
Operation
1. Learning Remote Controls
To pair a remote control with the system:
- Press the "STUDY" button (13 in Figure 1) on the control board. The indicator light should change, indicating it's in learning mode.
- Press the desired button on your remote control. The indicator light should flash or change again to confirm successful pairing.
- Repeat for any additional remote controls.
2. Tuya Smart Life App Control
The control board integrates with the Tuya Smart Life app for remote operation and smart home automation.
Setup Steps:
- Ensure the WiFi module is correctly connected to the board (31 in Figure 1).
- Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store.
- Register or log in to your account.
- In the app, tap "Add Device" or the "+" icon.
- The app should automatically discover the new device (ensure your phone's Bluetooth and WiFi are on, and the device is in pairing mode, usually indicated by a flashing light on the WiFi module).
- Follow the on-screen prompts to connect the device to your home WiFi network (2.4GHz only).
- Once connected, you can rename the device and access its control interface.
App Control Functions:
- Open/Close: Buttons to fully open or close the gate.
- Stop: Button to halt the gate's movement at any point.
- Lock: Function to prevent unauthorized operation.
- Scheduling: Set timers for automatic opening and closing at specific times.
- Automation: Create smart scenes to integrate with other Tuya-compatible devices.
Maintenance
- Regular Inspection: Periodically check all wiring connections for looseness or corrosion.
- Cleanliness: Keep the control board free from dust, moisture, and debris. Use a soft, dry brush or compressed air for cleaning.
- Environmental Conditions: Ensure the control board is installed in a protected enclosure to shield it from extreme weather conditions, as its operating temperature range is -45°C to 65°C.
- Firmware Updates: Check the Tuya Smart Life app for any available firmware updates for the WiFi module to ensure optimal performance and security.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate not responding to remote/app. | No power to the board; remote not paired; WiFi connection issue; motor fault. | Check power supply; re-pair remote; verify WiFi connection in app; inspect motor. |
| Gate opens/closes partially. | Limit switches incorrectly set; obstruction; motor force too low. | Adjust limit switches; clear obstructions; increase TORQUE setting. |
| Gate reverses direction unexpectedly. | Obstacle detection triggered; MOTO DIRECTION or LMT DIRECTION incorrect. | Check for obstacles; adjust CL FORCE; verify MOTO DIRECTION and LMT DIRECTION settings. |
| WiFi module not connecting to app. | Incorrect WiFi password; 5GHz WiFi network; module not in pairing mode. | Ensure correct 2.4GHz WiFi; put module in pairing mode (usually by power cycling or holding a button). |
User Tips
- Real-time Notifications: The Tuya Smart Life app typically supports real-time notifications for gate status (open/closed). Ensure notifications are enabled in both the app settings and your phone's operating system settings for the Tuya Smart Life app. This feature provides immediate alerts regarding your gate's activity.
- Power Supply Selection: The board supports both 110VAC and 220VAC. Ensure you select the correct power supply voltage for your region and motor to prevent damage.
- Professional Installation: For safety and optimal performance, consider professional installation, especially if you are unfamiliar with electrical wiring or gate automation systems.
Warranty and Support
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact our customer service:
- Email: zlinshow001@163.com
- WhatsApp/WeChat: +86 19350856924
Please provide your model number (FY-ODM-08W) and a detailed description of the issue when contacting support.