1. Important Safety Instructions
Please read these instructions carefully before using the product and keep this manual for future reference.
- This product is a cleaner for glass. The circumstances and safety of the place where it can be used should be judged by the user.
- Be sure to fasten the safety rope before using, and tie the safety rope to a fixed object inside the house to avoid danger.
- Always check whether the safety rope is damaged and whether the knot is loose before using.
- For glass doors and windows without a balcony, a danger warning must be set on the ground downstairs to prevent people from approaching.
- The machine must be connected to the power adapter to operate normally.
- Use the machine only when the built-in battery is fully charged (green light is on).
- Turn on the power button before placing the machine on the glass or floor.
- When placing the machine on the glass, ensure it is adsorbed tightly before letting go.
- Remove the machine before turning off the power.
- Do not use the machine in rainy or humid weather.
- Do not spray water directly onto the machine.
- Keep children away from the machine. This product is not a toy. Do not let children use or operate it. Keep vigilant when using the instrument. Do not let children approach the working area of the machine.
- Do not use on cracked glass. When using on reflective or coated glass, be careful of scratches due to wind and sand.
- Do not allow hair, corners of clothes, fingers, or any body part near the machine's opening.
- Do not let the machine inhale flammable liquid or gas, or use it near such substances.
Power Supply & Battery Safety
- Use only the standard power adapter. Using other types of power cords or adapters may lead to failure or danger.
- Use a suitable power socket and do not place heavy objects on the power cord and adapter.
- When maintaining the machine, turn off the power first and unplug the power adapter from the socket.
- Ensure good ventilation around the power supply. Do not cover the power adapter with other objects.
- Do not use the power adapter in a highly humid environment. Do not touch the power adapter with wet hands or feet.
- Use the power cord and adapter according to the label on the adapter.
- Do not use damaged power cords or adapters.
- The power adapter is a high voltage component. Do not attempt to repair it. If the adapter or power cord is damaged or exposed to excessive humidity, replace the power adapter.
- If the product's battery is not used properly, it may cause fire or chemical burns. Do not break or short-circuit this product, expose it to temperatures above 60°C, or burn it. Do not treat this product as household waste; hand it over to a local electrical and electronic equipment return station.
- To maintain the lifespan of the built-in battery, charge it every 4-6 months to ensure normal use.
- Operating temperature: 0°C ~ 40°C
- Storage temperature: -10°C ~ 50°C
2. Product Overview
Product Features
- Can wipe any thickness of glass.
- Manual and remote control modes.
- Artificial Intelligence (AI) technology.
- Ultrasonic automatic water spraying.
- Automatic cleaning modes (Up to down, Left to down, Right to down).
- Ultra-fine fiber cleaning cloth.
- Automatic stop after wiping.
- High-strength safety rope and safety rope buckle.
- Built-in Uninterrupted Power Supply (UPS) system maintains power for 20 minutes in case of power failure.
- Wireless remote control operation.
- Anti-falling control algorithm.
- Automatic detection of window frame.
- Brushless motor for efficient operation.
- Powerful 2800Pa suction force.
- Fast cleaning speed of 4 minutes per square meter.
- Load capacity of 80KG for enhanced safety.
Product Components
The following diagram illustrates the main components of your DIVEDEER Window Cleaning Robot:

- Indicator Lights: Red (abnormal state), Blue (normal operation), Green (charging completed), Orange (charging in progress).
- Remote Control Receiving Window
- Power On/Off Button
- Exhaust Outlet
- Water Filler Hole
- Power Socket
- Safety Rope Socket
- Blue Light
- Red Light
- Remote Control Receiving Window
- Nozzle
Package Contents
Your package includes the following items:

- DIVEDEER Window Cleaning Robot
- Remote Control
- Power Adapter (100-240V, 50-60Hz)
- Power Cable
- DC Extension Cable (4M)
- Cleaning Cloths (x10)
- Cleaning Rings (x2)
- Safety Rope (4M)
- Water Spray Bottle
- User Manual
3. Setup Guide
Unboxing and Initial Setup
Video Description: This video demonstrates the unboxing process of the DIVEDEER Window Cleaning Robot and shows how to connect the power adapter, attach the safety rope, and install the cleaning pads.
Installing Cleaning Cloths and Rings
Ensure the cleaning cloth is properly placed on the cleaning ring, and the cleaning ring is correctly attached to the cleaning wheel to prevent air leakage.

Connecting Power
- Connect the AC power cord to the adapter.
- Insert the L-type threaded connector into the power connector of the robot and tighten it.
- Plug the power cord into the socket.
Attaching the Safety Rope
Always fasten the safety rope securely to a fixed object inside the house to prevent the robot from falling.

Charging the Battery
- First, turn off the power switch on the device.
- Connect the power cord. The orange light will illuminate, indicating that it is in the charging state.
- When the green light illuminates, the battery is fully charged.
Injecting Water or Detergent
Only use water or special detergent diluted with water. Do not add any other detergent to the water tank. Open the silicone cover and fill in the cleaning solution.
4. Operating Instructions
How to Clean Glass
First Step: Dry Wipe
For the initial cleaning, especially if the glass is very dirty, perform a "dry wipe" first. Turn off the water spray function and do not spray any water. This helps remove sand and loose dirt from the glass surface. If water or detergent is sprayed on the cleaning cloth or glass first, it may mix with sand to form yellow mud, resulting in poor cleaning. The dry rubbing effect is best in sunny or low humidity weather. If the machine slips, spray a small amount of water on the cleaning cloth.
Second Step: Wet Wipe
After the dry wipe, change to a clean cloth. Turn on the automatic water spraying function, or keep the upper cleaning wheel clean and dry. Spray a little detergent (1-2 sprays) on the lower cleaning wheel. Do not wet the entire cloth, as a fully wet cloth can affect the machine's operation.
Attaching the Device to the Glass
- Long press the power on key for 2 seconds to start the machine and confirm the fan rotation.
- Place the machine on the glass, ensuring it is a safe distance from the window frame.
- Make sure the machine is securely adsorbed on the glass before releasing it.
Automatic and Manual Cleaning Modes
The robot offers three automatic cleaning modes and manual control via the remote.

Remote Control Functions
| Button/Icon | Function |
|---|---|
| Up arrow with '8' | Up and down automatic cleaning |
| Left arrow with '8' | Left and down automatic cleaning |
| Right arrow with '8' | Right and down automatic cleaning |
| Play/Pause | Pause/Play |
| Directional arrows | Manually move up, down, right, left |
| AU with water drop | Automatic water spray |
| Hand with water drop | Manual Water spray |
Three Intelligent Path Planning Modes
The robot can automatically clean windows using the following patterns:
- Up to Down: Cleans from the top to the bottom of the window.
- Left to Down: Cleans from the left side to the bottom of the window.
- Right to Down: Cleans from the right side to the bottom of the window.
Removing the Machine from the Glass
- Hold the window cleaning machine with one hand.
- Turn off the power with the other hand (long press the power button for 2 seconds).
- Carefully remove the window cleaner from the glass.
5. Maintenance
Cleaning Cloths
Regularly remove and wash the cleaning cloths. Ensure they are clean and dry before reattaching them to the cleaning rings.
Water Tank and Nozzle
- Clean the ultrasonic nozzle with a clean, soft cloth.
- Check the water tank regularly to ensure it contains water and that the cleaning solution added is clean and pure.
Battery Maintenance
To maintain the lifespan of the built-in battery, charge it every 4-6 months, even if not in use, to ensure its normal function.
6. Troubleshooting (Frequent Questions)
Q1: The machine runs slowly or fails during first use on dirty windows.
A: When the machine is unpacked, clean and dry the cleaning cloth before use. Spray a little water or glass cleaner on the cleaning cloth or the glass surface. After the cleaning cloth is wet and twisted dry, put it into the cleaning ring of the machine for use.
Q2: The machine tests itself at the beginning of operation, but cannot run smoothly and makes a warning sound (friction too large or too small).
A: Check the following:
- Is the cleaning cloth too dirty?
- Are the glass stickers or fog stickers causing low friction? They are not suitable for use.
- Is the glass too clean, making it too slippery?
- Is the humidity too low (e.g., in an air-conditioned room), making the glass too slippery after multiple wipes?
Q3: When pressing the up automatic cleaning button, the machine can't detect the upper edge of the window due to sliding.
A: Press the stop key to switch to left-down or right-down auto clean mode.
Q4: The machine cannot wipe the upper left side of the glass.
A: Use the remote control's manual window cleaning mode to wipe the missed part. This can happen if the glass or cleaning cloth is slippery, or if the wiped glass width is larger, causing the top line to slide a little.
Q5: The machine finishes cleaning ahead of time without cleaning all windows.
A: Press the left-down or right-down auto window mode button to continue the unfinished part.
Q6: Possible reasons for slipping and not climbing when climbing.
- The friction is too small (e.g., with stickers, thermal insulation stickers, or fog stickers).
- The cleaning cloth is too wet.
- The glass is very clean, making it too slippery.
- The humidity is too low (e.g., in an air-conditioned room), making the glass too slippery after multiple wipes.
- When starting the machine, place it at a distance from the window frame to avoid wrong judgment.
Q7: The machine doesn't run smoothly.
- The cleaning cloth might be too dirty. Replace it.
- There might be different areas on the glass surface (glass area, sticker area, thermal insulation sticker area, or fog sticker area). Use it in a single area.
- If the screw of the cleaning wheel is loose, tighten it (do not overtighten, as it may affect glass glue thickness or beveled window frame performance).
Q8: After cleaning, round wheel marks remain on the glass surface.
A: The cleaning cloth is too dirty. Replace it with a clean cloth and wipe again.
Q9: How to deal with warning sound and red light flashing when the machine stops due to power failure?
- Gently pull the safety rope back to the machine. When pulling, keep it as close to the parallel glass as possible to avoid falling.
- Turn off the machine power switch.
- Check the wire for poor contact or a broken wire.
Q10: The machine stops when encountering unknown obstacles, the red light flashes, and there is no warning sound.
- Remote control the machine to a safe location. Alternatively, gently pull the safety rope back to the machine, keeping it as close to the parallel glass as possible to avoid falling.
- Remove obstacles on doors and windows.
- Check if there is any cause of air leakage.
Q11: There are arc marks on the polished glass when the light is shining at night.
A: For the first time, turn off the water spraying function and use a clean cloth to remove sand. For subsequent wipes, clean and replace the cloth, turn on the water spraying function, or keep the upper cleaning wheel clean and dry, and spray a little detergent or alcohol on the lower cleaning wheel (1 or 2 sprays), ensuring it's not completely wet. This can eliminate arc traces. Note: All wet cleaning cloths will affect the machine's operation.
Q12: The machine has cleaned all windows, but it can't stop automatically.
A: Press the stop key on the remote control to stop the operation.
Q13: The machine will not spray water.
- Confirm whether the water spray function switch is on.
- Clean the ultrasonic nozzle with a clean soft cloth.
- Check the water tank to ensure there is water and that the added cleaning solution is clean and pure.
7. Specifications
| Feature | Specification |
|---|---|
| Adsorption Mode & Shape | Vacuum, Double Circle |
| Weight | 1050g |
| Dimensions (LWH) | 295 x 148 x 90 mm |
| Clean Mode | Rotary |
| Software | AI 4.0 |
| Automatic Water Spraying Technology | Ultrasonic Water Spraying |
| Glass Thickness | Unlimited |
| Power Input | 100-240V, 50/60Hz |
| Capacity | 90W |
| Anti-Power Break (UPS) | 20 minutes |
| Certification | CE FCC RoHS |
| Voltage | 100 - 240 V |
| Motor Type | Brushless |
| Suction Force | 2800Pa |
| Cleaning Speed | 4 min/m² |
| Load Capacity | 80KG |
8. User Tips
- Streak-Free Cleaning: If you notice streaks, try changing the cleaning cloths more often or adjusting the amount of water/detergent sprayed. Sometimes, a slightly less wet cloth can prevent streaks.
- Safety First: Always double-check that the safety rope is securely fastened to a strong, fixed object before operating the robot, especially on high windows.
- Optimal Cleaning: For very dirty windows, perform a dry wipe first to remove loose dirt and dust. This prevents mud formation and ensures a more effective wet cleaning cycle.
- Slippery Surfaces: If the robot struggles on very clean or overly slippery glass, try adjusting the dampness of the cleaning cloth. A slightly drier cloth might provide better grip.
- Maintain Spray Function: Regularly clean the ultrasonic nozzle and ensure the water tank contains only clean, pure cleaning solution for optimal and consistent water spraying.
9. Warranty and Support
Your DIVEDEER Window Cleaning Robot comes with a 2-year warranty. Additionally, you may be eligible for free returns within 90 days of purchase. For detailed information on warranty claims or support, please refer to the seller's policies.
A detailed user manual (PDF) is available for download here.