1. Introduction
This manual provides instructions for the safe and effective use of the Pangao Intelligent Knee Massager, Model PG-2015F3. This device is designed to provide air pressure massage, infrared heating, and vibration physiotherapy to the knee, shoulder, and elbow joints for pain relief and rehabilitation.
2. Safety Information
Please read all safety warnings and instructions carefully before using the device. Keep this manual for future reference.
- Do not use the device if you have any medical conditions that contraindicate massage or heat therapy, such as severe circulatory disorders, skin infections, or pacemakers. Consult a physician if unsure.
- Do not use on swollen, inflamed, or injured areas.
- Keep out of reach of children.
- Do not immerse the device in water or use it in excessively humid environments.
- Use only the provided charging cable and adapter.
- Discontinue use immediately if you experience discomfort or pain.
- The device is intended for personal, non-medical use.
3. Product Overview
3.1. Components
The Pangao Intelligent Knee Massager is an ergonomic device designed for comfort and effectiveness.


Key features include:

- Air Pressure Massage: Utilizes 3-sided dynamic airbags for stereoscopic massage.
- Infrared Heating: Far-infrared heating technology for deep tissue penetration.
- Vibration Massage: Dual motors provide high-frequency, low-intensity vibration.
- Ergonomic Design: Shaped to fit knee, shoulder, and elbow joints comfortably.
- Skin-friendly Material: Breathable fabric for extended use.
3.2. Control Panel
The device features an intuitive control panel for easy operation.

- Power Button: Turns the device on/off.
- Temperature Button: Adjusts heating levels.
- Air Pressure Button: Controls air pressure intensity.
- Vibration Button: Activates/deactivates vibration massage.
- Time Button: Sets the massage duration.
- Display Screen: Shows current settings for temperature, air pressure, vibration, and time.
4. Specifications
| Feature | Detail |
|---|---|
| Model Name | PG-2015F3 Knee Massager |
| Brand | Pangao (MIJIA) |
| Battery | 3.7V DC 3000mAh |
| Power | 10W |
| Charging | 5V DC 1A (USB) |
| Heating Temperature | +38℃ to +48℃ (3 levels: 41°, 45°, 48°) |
| Pressure Strength | 200mmHg |
| Net Weight | 750g |
| Dimensions (approx.) | 220mm (Height) x 150mm (Width) x 140mm (Depth) |
| Item Type | Massage & Relaxation |

5. Setup
5.1. Charging the Device
Before first use, fully charge the massager. Connect the provided USB charging cable to the device's charging port and to a 5V DC 1A USB power source. The battery indicator on the display will show charging status.
5.2. Wearing the Massager
The massager is designed to be versatile and can be used on the knee, shoulder, or elbow.

- Place the massager over the desired joint (knee, shoulder, or elbow).
- Adjust the straps to ensure a snug but comfortable fit. The device should be secure enough not to slip during use, but not so tight as to restrict circulation.
6. Operating Instructions
Refer to the control panel diagram (Figure 4) for button locations.
6.1. Power On/Off
- Press and hold the Power Button to turn the device on. The display will illuminate.
- Press and hold the Power Button again to turn the device off.
6.2. Adjusting Heating
The device offers 3 levels of heating, utilizing far-infrared technology.


- Press the Temperature Button to cycle through the heating levels (Low, Mid, High, Off).
- The current temperature setting will be displayed on the screen.
6.3. Adjusting Air Pressure Massage
The 3D stereoscopic massage uses dynamic airbags to surround and squeeze the joint.

- Press the Air Pressure Button to activate or adjust the air pressure massage intensity.
- The display will indicate the active air pressure mode.
6.4. Activating Vibration Massage
Dual motors provide high-frequency vibration to relax muscles.

- Press the Vibration Button to turn the vibration massage on or off.
- The display will show if vibration is active.
6.5. Setting the Timer
The device has an automatic shut-off feature and adjustable timing.

- Press the Time Button to cycle through available massage durations (e.g., 10, 20, 30 minutes).
- By default, the device will automatically shut down after 20 minutes if no specific time is set.
7. Maintenance and Care
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse in water. Ensure the device is off and unplugged before cleaning.
- Storage: Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge regularly, even if not in use for extended periods.
8. Troubleshooting
- Device does not turn on:
- Ensure the battery is charged. Connect to a power source and try again.
- Check if the power button is pressed and held sufficiently.
- No heating/vibration/air pressure:
- Verify that the respective function button has been pressed and the setting is visible on the display.
- Ensure the device is securely fitted to the joint.
- Device shuts off unexpectedly:
- The timer may have completed its cycle.
- The battery might be low. Recharge the device.
- Discomfort during use:
- Reduce the intensity of air pressure or turn off vibration/heating.
- Ensure the device is not too tight.
- If discomfort persists, discontinue use and consult a physician.
9. User Tips
- Start with lower intensity settings for heating, air pressure, and vibration, gradually increasing as comfort allows.
- Use the timed massage feature to ensure consistent session durations and prevent overuse.
- For optimal results, use the massager in a relaxed position, such as sitting or lying down.
- Ensure the device is clean and dry before each use.
10. Warranty and Support
For warranty information and customer support, please refer to the product packaging or contact the retailer where the device was purchased. Keep your proof of purchase for any warranty claims.