Godox MoveLink II M3

Contents

Godox MoveLink II M3 2.4GHz Wireless Microphone System User Manual

Model: MoveLink II M3

1. Introduction

The Godox MoveLink II M3 is a 2.4GHz wireless microphone system designed to deliver high-quality audio for various recording scenarios, including use with phones, DSLR cameras, and smartphones. It features advanced noise-canceling technology and an intuitive display for easy control. This manual provides detailed instructions for setting up, operating, and maintaining your MoveLink II M3 system.

Godox MoveLink II M3 system with two transmitters, one receiver, charging case, and various accessories.
The Godox MoveLink II M3 system and its included accessories.

2. What's in the Box

Before you begin, please check the contents of your package to ensure all items are present:

  • MoveLink II TX (Transmitter) × 2
  • MoveLink II RX (Receiver) × 1
  • Windscreens × 2
  • USB Type-C Cable × 1
  • Wrist Strap × 1
  • Iron Plate × 3
  • 3.5mm TRS-TRS Audio Connect Cable (For Camera) × 1
  • 3.5mm TRS-TRRS Audio Connect Cable (For Smartphone) × 1
  • MoveLink II Charging Case ML II-C3 × 1
Diagram showing all components included in the MoveLink II M3 package: two transmitters, one receiver, charging case, two windscreens, USB-C cable, wrist strap, iron plates, TRS-TRS cable, and TRS-TRRS cable.
Detailed view of the MoveLink II M3 package contents.

3. Setup Guide

3.1 Charging the System

The MoveLink II M3 system features built-in lithium-ion batteries. Before first use, fully charge all units using the provided USB Type-C cable and charging case.

  • Place the transmitters (TX) and receiver (RX) into the MoveLink II Charging Case.
  • Connect the USB Type-C cable to the charging case and a power source.
  • The units will indicate charging status on their displays.
Three Godox MoveLink II units charging in their portable charging case.
Units charging within the portable charging case.

3.2 Pairing Transmitters and Receiver

The MoveLink II system is designed for easy pairing:

  • Turn on both the transmitter(s) and the receiver.
  • Press the 'PAIR' button on both the transmitter(s) and the receiver. The units will automatically search and connect.
  • A successful connection will be indicated on the unit's display.

3.3 Connecting to Recording Devices

The system is highly compatible with various devices:

  • For Cameras (DSLR/Mirrorless): Use the included 3.5mm TRS-TRS Audio Connect Cable. Connect one end to the receiver's output and the other to your camera's microphone input.
  • For Smartphones/Tablets: Use the included 3.5mm TRS-TRRS Audio Connect Cable. Connect one end to the receiver's output and the other to your smartphone's headphone/microphone jack.
  • The transmitters feature a built-in omnidirectional microphone for clip-and-record use.
  • Attach the transmitter to clothing using its back clip.
Godox MoveLink II units and charging case laid out with a tablet, laptop, and smartphone, illustrating device compatibility.
The MoveLink II M3 system is compatible with a wide range of devices.

4. Operating Instructions

4.1 Power On/Off

Press and hold the power button on each unit (transmitter and receiver) to turn them on or off.

4.2 Monitoring Audio

The receiver includes a 3.5mm audio port for real-time monitoring. Connect headphones to this port to monitor your audio feed during recording, ensuring optimal sound quality.

4.3 Adjusting Settings

The intuitive display on each unit allows for easy adjustment of settings:

  • Volume Control: Use the dedicated buttons to adjust the audio input level.
  • Mute/Unmute: Quickly mute or unmute the microphone with a single press.
  • Noise Reduction: Activate the advanced noise-canceling feature with a simple press to reduce ambient noise.
  • Mono/Stereo Mode: For two-person recording scenarios, the dual-channel system allows you to combine or separate the two audio tracks for better post-processing.
Two Godox MoveLink II units displaying audio levels and settings on their screens.
The intuitive display provides real-time information and control.

4.4 Operation Range

The MoveLink II M3 system offers a maximum transmission distance of 100 meters (in open, unobstructed environments). It utilizes frequency-hopping technology to ensure a stable signal and minimize interference, even in areas with high Bluetooth and Wi-Fi traffic.

A person filming with a DSLR camera, wearing a Godox MoveLink II transmitter, demonstrating typical usage.
The system is ideal for 'run-and-gun' recording.

5. Maintenance

5.1 Cleaning

Wipe the units and charging case with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the device.

5.2 Battery Care

  • Fully charge the units before long-term storage.
  • Recharge the units every three months if not in use to maintain battery health.
  • Avoid exposing the units to extreme temperatures.

5.3 Windscreens

Use the included windscreens to reduce wind noise when recording outdoors. Replace them if they become worn or damaged.

6. Troubleshooting

  • No Audio Output: Ensure both transmitter(s) and receiver are powered on and successfully paired. Check cable connections to your recording device. Verify audio input levels on both the microphone system and your recording device.
  • Poor Audio Quality/Interference: Ensure you are within the 100m operating range. Avoid physical obstructions between the transmitter and receiver. Activate the noise-canceling feature. Check for other 2.4GHz devices nearby that might cause interference.
  • Units Not Charging: Ensure the USB Type-C cable is securely connected to both the charging case and a working power source. Verify that the units are correctly seated in the charging case.
  • Pairing Failure: Ensure both units are powered on. Try resetting both the transmitter(s) and receiver and attempt pairing again.

7. Specifications

FeatureReceiver (RX)Transmitter (TX)
ModelMoveLink II RXMoveLink II TX
Simulated Output3.5mm TRS-
Sensitivity--32dB+/-2dB
Max. SPL-110dB
Simulated Input-3.5mm TRS Lavalier microphone input
Frequency Range50Hz-20KHz50Hz-20KHz
Signal-to-noise Ratio70dB or higher70dB or higher
Fixing MethodBack clip (installed onto camera's hotshoe)Back clip
DisplayTFT DisplayTFT Display
Dynamic Range90dBA (microphone preamplifier)90dBA (microphone preamplifier)
Working RangeMax. 100m (in no shelter situation)Max. 100m (in no shelter situation)
Power SupplyBuilt-in lithium batteryBuilt-in lithium battery
Working TimeApprox. 8hApprox. 10h
Battery Capacity300mAh300mAh
Transmission Type2.4GHz Frequency hopping system2.4GHz Frequency hopping system
Sound Pick-up ModeOmnidirectionalOmnidirectional
Working Environment Temperature-10~50°C-10~50°C
Dimension (L×W×T)50mm × 40mm × 14mm50mm × 40mm × 14mm
Weight27g27g
Technical specifications table for the MoveLink II Receiver and Transmitter.
Detailed specifications for the MoveLink II Receiver and Transmitter.
FeatureSpecification
ModelML II-C3
MaterialABS Material
Suitable ModelsMoveLink II TX, MoveLink II RX
Charging InputUSB Type-C
Dimension (L×W×T)163mm × 66mm × 28mm
Weight126g
Technical specifications table for the MoveLink II Charging Case ML II-C3.
Detailed specifications for the MoveLink II Charging Case.

8. User Tips

  • Optimal Placement: For best audio quality, clip the transmitter close to the speaker's mouth, typically on the collar or lapel.
  • Monitor Regularly: Always use headphones to monitor audio during recording to catch any potential issues like interference or low battery before they ruin your take.
  • Battery Management: Keep an eye on the battery indicators on the units' displays. The transmitter offers approximately 10 hours of working time, and the receiver approximately 8 hours. The charging case provides convenient recharging on the go.
  • Noise Reduction: Experiment with the noise-canceling feature in different environments to find the optimal setting for your recording conditions.
  • Cable Selection: Ensure you are using the correct audio cable (TRS-TRS for cameras, TRS-TRRS for smartphones) for your recording device to avoid compatibility issues.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the official Godox customer service. Keep your proof of purchase for any warranty claims.

You can find more information and support resources on the official Godox website: www.godox.com

Godox official website address.
Official Godox website for further support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.