LHY Audio SW-8

Contents

LHY Audio HiFi Audio Fever SW-8 Ethernet Switch

User Instruction Manual

1. Introduction

The LHY Audio HiFi Audio Fever SW-8 Ethernet Switch is a high-performance network switch designed specifically for audio enthusiasts. It aims to significantly reduce noise and interference in your audio network, leading to improved sound quality, more accurate sound field positioning, and richer musical details. This manual provides comprehensive instructions for setting up, operating, and maintaining your SW-8 or SW-5 Ethernet Switch.

2. Key Features

  • Optimized Power Supply: Features a full linear DC power supply with a three-way independent LT 3042 + PNP architecture (Ultimate Edition) or two-level multi-channel low-noise pure DC power supply (Advanced Edition) to minimize noise to uV levels.
  • High-Precision OCXO Clock: Incorporates an imported high-precision SC-Cut OCXO constant temperature crystal oscillator and low phase noise PLL circuit, replacing standard crystal oscillators to greatly improve clock accuracy and reduce time jitter.
  • Enhanced Filtering: Includes EMI AC filtering, high-speed rectifier filters, and CLC three-level filtering to effectively inhibit and eliminate AC circuit interference, resulting in a cleaner background and improved resolution.
  • Robust Construction: The Ultimate Edition features an aluminum alloy integral hollowed-out shell, separating circuits to reduce interference and mechanical resonance.
  • Linksys-Lead Modification: Based on high-performance Linksys LGS105/108 switches, optimized for audio applications.
Internal components of LHY Audio SW-8 Ethernet Switch

Internal view of the SW-8 (Flagship Edition) switch, highlighting key components.

Diagram showing sound quality improvement through signal processing

Diagram illustrating the overall sound and image quality improvement.

3. Specifications

Table comparing specifications of Advanced Edition and Flagship Edition

Comparison of Advanced Edition (SW-5) and Flagship Edition (SW-8) specifications.

FeatureAdvanced Edition (SW-5)Flagship Edition (SW-8)
Number of Ports58
Port Speed10/100/1000M10/100/1000M
Regulated Power SupplyLM1086/LT3045 solution3-way LT3042+PNP
Core ClockImported OCXO constant temperature crystal oscillatorImported OCXO constant temperature crystal oscillator
Shell TypeAluminum Alloy profile combinationIntegral aluminum alloy processing
Dimensions (WxHxD)180 x 60 x 220mm240 x 50 x 175mm
Weight1.5kg1.95kg
VoltageFactory 220 ~ 240VAC (customizable 110 ~ 120VAC)
Power Consumption8W10W
AttachmentNational standard power cord

4. Package Contents

Please check the package for the following items:

  • LHY Audio HiFi Ethernet Switch (SW-8 or SW-5, depending on your order)
  • National standard power cord

Note: Network cables are not included and must be purchased separately.

5. Setup Instructions

Follow these steps to connect your LHY Audio Ethernet Switch to your audio system:

  1. Placement: Place the switch on a stable, flat surface, away from direct heat sources or excessive moisture. Ensure adequate ventilation around the unit.
  2. Power Connection: Connect the provided power cord to the AC inlet on the rear panel of the switch and then to a suitable power outlet.
  3. Network Connections:
    • Connect your router or main network source to any of the available Ethernet ports on the switch using a high-quality Ethernet cable (not included).
    • Connect your audio devices (e.g., NUC, Mac Mini, NAS, digital broadcasting devices, hard disk boxes, notebooks, desktop computers) to the remaining Ethernet ports on the switch.
  4. Power On: Flip the power switch on the rear panel to the 'ON' position. The device is designed for plug-and-play operation.
Front and rear view of LHY Audio SW-8 Ethernet Switch

Front and rear view of the SW-8 (Flagship Edition) switch, showing ports and power input.

Connection diagram for LHY Audio Ethernet Switch with audio devices

Typical connection diagram: Router to switch, switch to audio devices.

For optimal performance, consider using high-quality, shielded Ethernet cables, such as the German Sommer network cable mentioned in the product description, for connections between the switch and your audio components.

6. Operation

The LHY Audio Ethernet Switch is designed for simple, plug-and-play operation. Once connected and powered on, it will automatically detect and configure connected devices. There are no complex settings or software required for basic functionality.

  • Automatic Negotiation: The switch ports automatically negotiate the optimal speed (10/100/1000M) and duplex mode with connected devices.
  • Status Indicators: Refer to the LED indicators on the front or rear panel (if present) for port activity and connection status.
  • Sound Quality Improvement: The primary function of this switch is to reduce network noise and jitter, thereby enhancing the clarity, detail, and soundstage of your audio playback.

7. Maintenance

To ensure the longevity and optimal performance of your LHY Audio Ethernet Switch, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or aerosols, as they may damage the finish or internal components.
  • Ventilation: Ensure that the ventilation openings are not blocked. Proper airflow is crucial to prevent overheating.
  • Power Cycle: If you experience any network issues, try power cycling the switch by turning it off, waiting for 10-15 seconds, and then turning it back on.
  • Cable Management: Keep network cables tidy and avoid excessive bending or crimping to prevent signal degradation.

8. Troubleshooting

If you encounter issues with your LHY Audio Ethernet Switch, please refer to the following common problems and solutions:

  • No Power:
    • Check if the power cord is securely connected to both the switch and the power outlet.
    • Ensure the power switch on the rear panel is in the 'ON' position.
    • Verify that the power outlet is functional.
  • No Network Connection:
    • Ensure all Ethernet cables are securely plugged into their respective ports on the switch and connected devices.
    • Check the LED indicators on the switch ports; they should typically show activity when a device is connected and active.
    • Try using different Ethernet cables to rule out faulty cabling.
    • Restart the connected devices (router, audio streamer, computer) and the switch.
  • Poor Audio Quality (unexpected):
    • While the switch is designed to improve audio quality, ensure all other components in your audio chain are functioning correctly.
    • Verify that high-quality audio files or streams are being used.
    • Check for any external sources of electromagnetic interference near the switch or audio equipment.

If problems persist, please contact LHY Audio customer support for further assistance.

9. User Tips

  • Cable Quality Matters: Invest in high-quality, shielded Ethernet cables for all connections to and from the switch. This can further enhance the noise reduction benefits of the device.
  • Dedicated Power: If possible, connect the switch to a clean power source or a power conditioner to minimize electrical noise.
  • System Integration: Allow your audio system some time to 'settle in' after introducing the switch. Many users report improvements becoming more apparent over a few days of listening.
  • Experiment with Placement: While the aluminum shell helps, try to keep the switch physically separated from other noisy electronic devices (e.g., power supplies, large transformers) if space allows.

10. Warranty and Support

LHY Audio products are manufactured to high standards and undergo rigorous quality control. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support, troubleshooting assistance, or inquiries regarding your LHY Audio Ethernet Switch, please contact the seller or LHY Audio customer service through their official channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.