1. Introduction
Thank you for choosing the EVE F1202 Portable Power Station. This device is a high-capacity, high-power portable energy storage solution designed to provide reliable power for various applications, including outdoor activities, self-drive travel, aerial photography, and emergency backup during power outages. Featuring a 1024Wh capacity and 1200W AC output, it utilizes high-quality LiFePO4 C40 cells for long life and safety. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: EVE F1202 Portable Power Station in use with solar panel and connected devices.
2. Key Features
- High Capacity & Power: 1024Wh battery capacity with 1200W rated AC output (1500W peak).
- Durable Battery: Utilizes LiFePO4 C40 cells, offering 2000 battery cycles.
- Fast Charging: AC Mains Charging from 0% to 100% in approximately 1.58 hours.
- Solar Charging: Supports up to 600W Max solar panel charging.
- Multiple Outputs: Equipped with 11 output ports, including AC, USB-A, USB-C (PD 100W), DC5521, and 12V car charger.
- Emergency Power Supply (EPS): Switchover time less than 30ms to protect data during sudden power outages.
- Safety: V-0 grade fireproof material and overcurrent protector.
- Design: Portable handle, visual screen display, high-quality rubber dust stopper, high light LED lighting.
Figure 2: Overview of EVE F1202 key features and specifications.
3. Setup
3.1 Unpacking
Carefully remove the EVE F1202 Portable Power Station and its accessories from the packaging. Verify that all components are present:
- EVE F1202 Portable Power Station
- AC Power Cable
- User Manual (this document)
Figure 3: Product dimensions and included accessories.
3.2 Initial Charging
Before first use, it is recommended to fully charge the power station.
3.2.1 AC Mains Charging
- Connect the provided AC power cable to the AC input interface on the power station.
- Plug the other end of the AC power cable into a standard wall outlet (110V platform Max 800W).
- The display screen will indicate charging status. The unit charges from 0% to 100% in approximately 1.58 hours.
Figure 4: AC Mains Charging process.
3.2.2 Solar Panel Charging
- Connect a compatible solar panel (Max 600W) to the DC input interface on the power station.
- Ensure the solar panel is placed in direct sunlight for optimal charging efficiency.
- The display screen will show the solar charging input and battery level.
Figure 5: Solar Panel Charging in an outdoor setting.
4. Operation
4.1 Powering On/Off
Press and hold the ON/OFF button located on the front panel to power the unit on or off. The visual screen display will activate upon powering on.
4.2 Output Ports Overview
Figure 6: Front panel with labeled ports and controls.
The EVE F1202 features 11 output ports:
- AC Output: Two 110V AC outlets (Rated power 1200W, peak 1500W). Ideal for household appliances, power tools, etc.
- USB Output: Multiple USB-A (4QC18W) and USB-C (2 PD 100W) ports for charging smartphones, tablets, laptops, and other USB-powered devices.
- DC Output: One 12V cigarette lighter port and two DC5521 ports for powering 12V devices.
4.3 Connecting Devices
To power a device, simply plug it into the appropriate output port. Ensure the power station is turned on. The display will show real-time input and output wattage, as well as the remaining battery percentage.
4.4 Emergency Power Supply (EPS) Function
When connected to AC mains and also powering devices, the F1202 can act as an uninterruptible power supply. In case of a power outage, it will automatically switch to battery power within 30ms, ensuring continuous operation for connected devices.
4.5 Applications
The EVE F1202 is versatile and can power a wide range of equipment:
- Outdoor & Travel: UAVs, laptops, cameras, car refrigerators, fans, kettles.
- Home & Emergency: Projectors, hair dryers, electric blankets, drills, air fryers.
Figure 7: Estimated usage times for various devices.
Video 1: Demonstration of a portable power station providing backup power during outages and for various applications.
5. Maintenance
5.1 Cleaning
Wipe the exterior of the power station with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure all ports are free from dust and debris.
5.2 Storage
When storing the power station for extended periods, ensure it is charged to approximately 50-80% and stored in a cool, dry place away from direct sunlight and extreme temperatures. The recommended storage temperature is -20°C to 45°C.
5.3 Battery Care
The EVE F1202 uses LiFePO4 batteries, known for their long lifespan. To maximize battery health, avoid completely draining the battery frequently. Recharge the unit regularly, even if not in active use.
6. Troubleshooting
If you encounter issues with your EVE F1202, please refer to the following common problems and solutions:
- Unit does not power on: Ensure the battery is charged. If not, connect to AC mains or a solar panel to charge.
- No output from ports: Check if the specific output (AC, DC, USB) is enabled on the display. Some outputs may need to be manually activated. Ensure the device you are trying to power is within the power station's output limits.
- Overload warning: If an overload warning appears on the display, disconnect some devices to reduce the load. The power station has an overcurrent protector to prevent damage.
- Slow charging: For solar charging, ensure panels are in direct sunlight and free from obstructions. For AC charging, verify the power cable is securely connected and the wall outlet is functioning.
If problems persist, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model | F1202 |
| Battery Capacity | 1024 Wh |
| Cell Type | LiFePO4 C40 cell |
| AC Output | 110V pure sine wave, Rated power 1200W, Peak 1500W |
| USB Output | 2 USB-A 12W, 2 QC 18W, 2 PD 100W (Type-C) |
| 12V Output | 1 cigarette lighter port, 2 DC5521 ports (shared 120W max) |
| AC Charging | Mains charging 100-120V, Max 800W (US-spec) |
| Solar Charging | Max 600W |
| Car Charging | Max 120W |
| Dimensions (L×W×H) | 330±5mm × 225±5mm × 301±5mm |
| Weight | Approximately 13.5 kg |
| Charging Ambient Temperature | 0°C-40°C |
| Discharge Ambient Temperature | -10°C-40°C |
| Storage Temperature | -20°C-45°C |
| MPPT Efficiency | ＞88% |
Figure 8: Detailed product specifications.
8. User Tips
- Optimize Solar Charging: Position your solar panels to receive maximum direct sunlight throughout the day. Adjust their angle periodically for best results.
- Monitor Display: Regularly check the visual screen display for real-time power input/output and battery status to manage your power consumption effectively.
- Emergency Preparedness: Keep the power station charged and ready for unexpected power outages. Its quick EPS switchover ensures minimal disruption.
- Versatile Use: Don't limit its use to just emergencies. The F1202 is excellent for powering tools on job sites, providing electricity for outdoor events, or charging drones during aerial photography sessions.
9. Warranty and Support
EVE Energy Co., Ltd. was established in 2001 and is a global leader in lithium battery technology. The company is committed to providing high-quality products and solutions.
9.1 Certifications
EVE products adhere to various national and international standards. The company has applied for over 5,900 national patents and holds multiple certifications, ensuring product quality and safety.
Figure 9: Product certifications.
9.2 Customer Support
For any inquiries, technical support, or warranty claims, please contact your retailer or the official EVE Energy customer service channels. Accepted communication languages include English, Chinese, and Russian.
