1. Introduction
The Hantek TO1000 series represents a new generation of multi-functional, full touch screen oscilloscopes designed for portability and ease of use. Featuring a thin, lightweight body and a unique hanging design, it offers enhanced durability and hands-free operation. The TO1112C model integrates a 2-channel oscilloscope and a multimeter, providing versatile measurement capabilities. It is equipped with a super large capacity battery for long endurance and supports fast charging via a standard 18W Type-C charger.
2. Package Contents
Please check the package contents upon unboxing to ensure all items are present and in good condition. If any items are missing or damaged, please contact your vendor.
- Oscilloscope Unit (TO1112C) x 1
- Protective Package/Carrying Case x 1
- Oscilloscope Probe (2Ch) x 1
- HT324 Test Leads (for Multimeter) x 1
- 18W Charger, Type-C x 1
- Multimeter Probe x 1
3. Key Features
The Hantek TO1112C combines powerful measurement capabilities with a user-friendly interface:
- Multi-touch Large Screen: High-resolution 800x480 display with an intuitive UI for an excellent interaction experience.
- 2-Channel Oscilloscope: Features a maximum bandwidth of 110MHz, a sampling rate of 250MSa/s, and 8M large storage depth.
- High-Precision Multimeter: Provides data recording, storage, trend charts, and statistical analysis functions.
- One-Key Waveform Storage: Convenient and fast saving of waveform data.
- Suspension Foot Design: Multi-angle adjustment, anti-falling, and anti-seismic for versatile placement.
- Long-Lasting Battery: Built-in super large capacity lithium battery ensures extended endurance, with standby time up to half a year.
- Fast Charging: Supports Type-C fast charging with the standard 18W charger, compatible with mobile phone chargers.
4. Setup
4.1 Initial Charging
Before first use, it is recommended to fully charge the oscilloscope. Connect the provided 18W Type-C charger to the device's Type-C port and plug it into a power outlet. The charging indicator will show the charging status. A full charge ensures optimal battery performance.
4.2 Powering On/Off
- Power On: Press and hold the power button located on the side/top of the device until the screen illuminates.
- Power Off: Press and hold the power button until a shutdown prompt appears on the screen, then confirm to power off. A short press typically puts the device into standby mode.
4.3 Connecting Probes
For oscilloscope measurements, connect the oscilloscope probes to the CH1 and CH2 BNC input connectors on the device. Ensure the probe ground clip is securely connected to the circuit's ground reference. For multimeter functions, connect the multimeter probes to the dedicated multimeter input jacks (VΩ/C, COM, mA, A) on the side of the device.
5. Operating Instructions
5.1 Touch Screen Navigation
The device features a full multi-touch screen. Navigate through menus, adjust settings, and control functions by tapping, swiping, and pinching gestures similar to a smartphone. The main interface typically includes icons for HOME, OSC (Oscilloscope), DMM (Digital Multimeter), H/R (Hold/Run), and PRINT.
5.2 Oscilloscope Function (OSC)
Tap the "OSC" icon to enter oscilloscope mode. Here you can:
- Adjust Vertical Scale (Volts/Div): Pinch in/out on the waveform display or use dedicated on-screen controls.
- Adjust Horizontal Scale (Time/Div): Pinch in/out on the time axis or use on-screen controls.
- Trigger Settings: Tap the trigger icon to set trigger type (Edge, Pulse, Video, etc.), source, slope, and level.
- Measurements: Use the "Measure" menu to select automatic measurements (e.g., Vpp, Vmax, Freq, Period).
- Waveform Storage: Use the "Save" function to store current waveforms.
5.3 Digital Multimeter Function (DMM)
Tap the "DMM" icon to switch to multimeter mode. The TO1112C offers various measurement capabilities:
- Voltage Measurement: Select AC or DC voltage. Connect probes to VΩ/C and COM.
- Current Measurement: Select AC or DC current (mA or A range). Connect probes to mA/A and COM.
- Resistance Measurement: Connect probes to VΩ/C and COM.
- Capacitance Measurement: Connect probes to VΩ/C and COM.
- Diode Test: Connect probes to VΩ/C and COM.
- Continuity Test: Connect probes to VΩ/C and COM.
- Data Recording: The multimeter function supports data recording, storage, and generating trend charts for analysis.
6. Maintenance
6.1 Cleaning
To clean the device, use a soft, damp cloth. Do not use abrasive cleaners or solvents that could damage the screen or casing. Ensure the device is powered off and disconnected from any power source before cleaning.
6.2 Battery Care
The built-in lithium battery is designed for long life. To maximize battery lifespan:
- Avoid fully discharging the battery frequently.
- Store the device in a cool, dry place when not in use for extended periods.
- If storing for a long time, charge the battery to about 50-70% capacity.
6.3 Storage
When not in use, store the oscilloscope in its protective package in a clean, dry environment, away from direct sunlight, extreme temperatures, and high humidity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is depleted or faulty. | Connect the charger and allow it to charge for at least 30 minutes before attempting to power on again. If still unresponsive, contact support. |
| No waveform displayed in OSC mode. | Probe not connected, incorrect trigger settings, or signal too small/large. | Ensure probes are correctly connected. Adjust trigger level and mode. Check vertical and horizontal scales. Use "Auto" setup if available. |
| Multimeter readings are incorrect or unstable. | Probes not properly connected, wrong measurement mode selected, or faulty probes. | Verify probe connections to the correct jacks. Select the appropriate measurement function (V, A, Ω, etc.). Test with known good probes if possible. |
| Touch screen unresponsive. | Temporary software glitch or screen damage. | Restart the device. If the issue persists, contact support. |
8. Specifications
The following table outlines the key specifications for the Hantek TO1112C model:
| Feature | Specification (TO1112C) |
|---|---|
| Oscilloscope Channels | 2 CH |
| Bandwidth | 110 MHz |
| Sampling Rate | 250 MSa/s |
| Storage Depth | 8 M |
| Signal Source | - (Not included) |
| Multimeter | Included |
| Display | Multi-touch, 800x480 resolution |
| Battery | Built-in large capacity lithium battery |
| Charging | Type-C, 18W fast charging |
For more detailed specifications, please refer to the comprehensive specification sheet:
9. User Tips
- Utilize the Suspension Foot: The integrated suspension foot allows for multi-angle adjustment, providing stable and hands-free operation on various surfaces.
- Fast Charging Convenience: The Type-C charging port and 18W fast charger mean you can often use your mobile phone charger for convenience, reducing clutter.
- Data Logging: Take advantage of the multimeter's data recording and trend chart features for long-term monitoring and analysis of electrical parameters.
- One-Key Save: Quickly save important waveform captures using the one-key storage function for later review or documentation.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Hantek website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.