LEEDOAR X56

Contents

LEEDOAR TWS X56 Earclip Bluetooth Earphones User Manual

Model: X56

1. Introduction

Thank you for choosing the LEEDOAR TWS X56 Earclip Bluetooth Earphones. These earphones are designed for comfort and high-fidelity sound, featuring an innovative ear-clip design suitable for various activities including gaming and sports. This manual provides essential information for setting up, operating, and maintaining your earphones.

Package Contents:

  • 1x M30 TWS Bluetooth Earphones (left and right)
  • 1x Charging Box
  • 1x Type-C Charging Cable
  • 1x User Manual

2. Product Overview

The TWS X56 earphones feature a unique ear-clip design for comfortable, earless wear, ensuring no sound leakage and long-term comfort without ear injury. They are equipped with Bluetooth 5.3 chips for stable connectivity and offer HIFI stereo sound quality.

TWS X56 Earclip Bluetooth Earphones in charging case, displaying 'Holographic stereo' and 'Bone conduction split-ear Bluetooth earphones don't fit'

Figure 1: TWS X56 Earphones and Charging Case

Earphones in case, showing 'It doesn't hurt your ears', 'Cinema grade HiFi sound quality comfortable to wear', 'Type-C charging lasting 24 hours', 'Dual channel noise reduction LED power display'. Inset shows ear placement.

Figure 2: Comfort and Sound Quality Features

Internal structure diagram of the earphone speaker, highlighting 'HIFI shock sound quality large film loudspeaker sound' and 'Three-frequency balanced surging three-dimensional surround sound'.

Figure 3: HIFI Sound Quality Loudspeaker Design

3. Setup and First Use

3.1 Charging the Earphones and Case

Before first use, fully charge the earphones and the charging case. Connect the provided Type-C charging cable to the charging case and a 5V-1A power source. The LED display on the charging case will indicate the charging status and battery levels for both the case and individual earphones.

  • Charging time of headset: Approximately 1 hour
  • Charging time of the Charging box: Approximately 1.5 hours
Earphones in case, showing LED power display.

Figure 4: Charging Case with LED Power Display

3.2 Wearing the Earphones

The TWS X56 earphones feature an ear-clip design. Gently clip each earphone onto your ear, ensuring a comfortable and secure fit. The design is intended for long wear without discomfort or ear injury.

Woman wearing earphone while exercising.

Figure 5: Proper Earphone Placement

3.3 Pairing with a Device

  1. Open the charging case. The earphones will automatically power on and enter pairing mode.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth.
  3. Search for available Bluetooth devices and select "X56" or "M30" from the list.
  4. Once connected, the earphones will indicate successful pairing. The intelligent sensing feature allows for automatic matching upon opening the case after the initial pairing.
Earphones in case, phone nearby, showing 'Intelligent sensing open cover automatic matching'.

Figure 6: Intelligent Sensing for Automatic Pairing

Earphones in case, phone and laptop nearby, showing 'Compatible with various devices easily pair Bluetooth with one click'.

Figure 7: Compatibility and Easy Pairing

4. Operating Instructions

4.1 Power On/Off

  • Power On: Open the charging case, and the earphones will automatically power on. Alternatively, press and hold the touch control area on each earphone for a few seconds.
  • Power Off: Place the earphones back into the charging case and close the lid. They will automatically power off and begin charging. Alternatively, press and hold the touch control area for a longer duration.

4.2 Music Playback

The earphones support standard music playback controls via their touch-sensitive areas:

  • Play/Pause: Single tap on either earphone.
  • Next Track: Double tap on the right earphone.
  • Previous Track: Double tap on the left earphone.
  • Volume Control: The earphones have volume control functionality. Specific gestures may vary; refer to the quick start guide for detailed touch controls.

4.3 Call Management

With the built-in microphone, you can manage calls directly from your earphones:

  • Answer/End Call: Single tap on either earphone.
  • Reject Call: Press and hold the touch control area for 2 seconds.

4.4 Voice Assistant

Activate your device's voice assistant (Siri, Google Assistant, etc.) by triple-tapping on either earphone.

5. Maintenance and Care

  • Cleaning: Use a soft, dry, lint-free cloth to clean the earphones and charging case. Do not use harsh chemicals or abrasive materials.
  • Storage: When not in use, store the earphones in their charging case to protect them and ensure they remain charged. Store in a cool, dry place away from extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the earphones and charging case frequently. Charge them regularly, even if not in constant use.
  • Water Resistance: While suitable for sports, avoid submerging the earphones in water. Wipe off sweat or moisture immediately after use.

6. Troubleshooting

6.1 Earphones Not Pairing

  • Ensure both earphones are charged.
  • Make sure Bluetooth is enabled on your device.
  • Turn off Bluetooth on your device, then turn it back on.
  • Forget the device from your phone's Bluetooth settings and try pairing again.
  • Ensure the earphones are within the 10-meter transmission range of your device.

6.2 No Sound or Low Volume

  • Check the volume levels on both your device and the earphones.
  • Ensure the earphones are properly connected to your device.
  • Try playing different audio files or apps to rule out a source issue.
  • Re-pair the earphones with your device.

6.3 Charging Issues

  • Verify the Type-C charging cable is securely connected to both the case and the power source.
  • Ensure the power source is functioning correctly.
  • Clean the charging contacts on the earphones and inside the case with a dry cotton swab.
  • Check if the charging case itself has sufficient battery.

7. Specifications

FeatureSpecification
Product TypeBluetooth headphones with clip-on ears
Bluetooth Version5.3
Product ColorBlack
Charging InterfaceType-C
Charging Voltage5V-1A
Frequency Response Range20Hz~20kHz
Sensitivity95±3dB
Impedance32Ω
Headset Battery Capacity50mAh (per earphone)
Charging Box Battery Capacity350mAh
Transmission Distance10M (open and barrier-free)
Music Playback TimeAbout 3-5 hours (up to 5 hours)
Standby Time120 hours (up to 1888 hours with charging case)
Headset Charging TimeAbout 1 hour
Charging Box Charging TimeAbout 1.5 hours
MaterialPVC, ABS+PC
Earcups TypeSemi-open
Number of Drivers2
Magnet TypeNeodymium
CodecsAAC
With MicrophoneYes
Active Noise-CancellationNo
Vocalism PrincipleDynamic
StyleEar Hook
CertificationCE
Product Parameters table showing specifications like Bluetooth version, charging interface, transmission distance, standby time, product material, music playback time, and battery capacity.

Figure 8: Detailed Product Parameters

8. User Tips

  • Comfortable Fit: The ear-clip design is engineered for comfort, allowing for long periods of wear without discomfort or ear injury. The lightweight design (approx. 4.5g per earphone) further enhances this.
  • Open-Ear Design: Enjoy your audio while remaining aware of your surroundings, thanks to the open-ear design that minimizes sound leakage.
  • High-Quality Audio: Experience HIFI shock sound quality with a large film loudspeaker and three-frequency balanced surging three-dimensional surround sound.
  • Smart Power Display: The charging case features a smart LED display that shows the battery levels of both the case and individual earphones at a glance.
  • Quick Pairing: With intelligent sensing, the earphones automatically connect to your device once the charging case is opened after the initial pairing.
  • Directional Sound: Benefit from directional sound transmission technology and a built-in anti-leakage sound filter, which helps protect your privacy and ensures clear audio.
Smart three real display (LED indicators) for left ear, right ear, and charging capacity. Playtime, music playback, movie playback estimates.

Figure 9: Smart LED Power Display

Earphone in ear, showing 'Directional voice transfer side by side really does not miss', 'Directional sound transmission technology, built-in anti-leakage sound filter'.

Figure 10: Directional Sound Technology

9. Warranty and Support

LEEDOAR provides a warranty for its products against defects in materials and workmanship under normal use. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact the seller directly. If you encounter any issues or require technical assistance, please reach out to the customer support team of your retailer or the manufacturer.

Video 1: Product Demonstration and Features Overview

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.