1. Introduction
Thank you for choosing the ANDELI LCD Smart Tig-250 Pro, a versatile 6-in-1 AC/DC HF TIG Pulse Cold MMA Multifunctional Aluminium TIG Welding Machine. This advanced inverter welder is designed for professional and home use, offering precise control and high-quality welds across various materials and applications. Its intuitive LCD interface simplifies operation, making it suitable for both experienced welders and beginners.
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your welding machine. Please read it thoroughly before use and keep it for future reference.
2. Safety Information
WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.
- Always wear appropriate personal protective equipment (PPE), including welding helmet, gloves, protective clothing, and safety shoes.
- Ensure adequate ventilation to avoid inhaling welding fumes.
- Protect bystanders from arc rays and hot metal.
- Never touch live electrical parts.
- Ensure the machine is properly grounded.
- Keep flammable materials away from the welding area.
- Do not operate the machine in wet conditions.
- Disconnect power before performing any maintenance or service.
3. Package Contents
Upon unpacking, please verify that all items listed below are included and undamaged. If anything is missing or damaged, contact your supplier immediately.


- ANDELI LCD Smart Tig-250 Pro Welding Machine
- Ground Clamp (2M)
- WP-26 TIG Torch (4M)
- Gas Pipe (3M)
- Hose Clamp (x2)
- Collets (various sizes, e.g., 10 or 20 pieces depending on package)
- Nozzles (various sizes, e.g., 20 pieces)
- Tungsten Electrodes (various types and sizes, e.g., 10 pieces)
- Foot Switch
- WP-9 TIG Torch (4M) (if included in specific package)
- Pyrex Cup Kit (49pcs) (if included in specific package)
- User Manual (this document)
4. Product Overview
The ANDELI Tig-250 Pro is a compact and powerful welding machine featuring a large LCD display for easy parameter adjustment and monitoring. It supports multiple welding processes including AC TIG, DC TIG, Pulse TIG, Cold Welding, and MMA (Stick) welding.


4.1 Key Features:
- 6-in-1 Functionality: AC TIG, DC TIG, HF TIG, Pulse TIG, Cold Welding, MMA.
- LCD High-Definition Display: Provides clear and comprehensive welding parameter information.
- Synergic Control: Simplifies parameter setup, suitable for beginners.
- Advanced Cooling System: Ensures stable power output and extended machine life.
- Multiplate Design: For enhanced durability and performance.
- Aluminum Welding Capability: Specialized AC TIG for aluminum.
- Channel Storage: Up to 6 channels available for saving welding settings.
5. Setup
5.1 Power Connection
The machine operates on 220V. Ensure your power supply matches the machine's requirements. Connect the power cable to a suitable grounded outlet.
5.2 Gas Connection (for TIG/Cold Welding)
Connect the gas pipe (3M) to the gas inlet on the rear panel of the machine and to your shielding gas cylinder (e.g., Argon for TIG). Secure connections with hose clamps.
5.3 Torch and Ground Clamp Connection
- Connect the TIG torch (WP-26 4M or WP-9 4M) to the appropriate connector on the front panel.
- Connect the ground clamp (2M) to the workpiece and the corresponding terminal on the front panel.
- For MMA welding, connect the electrode holder to the positive terminal and the ground clamp to the negative terminal.
5.4 Foot Switch Connection
If using a foot switch for remote current control, connect it to the designated port on the front panel.
6. Operating Modes
The Tig-250 Pro offers multiple welding modes accessible via the LCD display. Use the control knobs and buttons to navigate and select your desired mode.


- AC TIG (AL): Ideal for welding aluminum and its alloys. Provides excellent cleaning action.
- DC TIG: Suitable for welding stainless steel, carbon steel, copper, and other non-ferrous metals (except aluminum).
- Pulse TIG: Offers enhanced control over heat input, reducing distortion and improving weld quality, especially on thin materials.
- Cold Welding: A specialized mode for welding very thin sheets (0.3-1mm) without overheating.
- MMA (Stick Welding): For general-purpose welding with coated electrodes.
6.1 Welding Thickness Guidelines

- AL (AC TIG): 0.5-5mm
- COLD: 0.3-1mm
- TIG (DC TIG): 0.8-8mm
7. Controls and Display
The machine features a high-definition LCD display and intuitive controls for precise parameter adjustment.

7.1 LCD Display Functions:
- Waveform Selection: Choose between different AC waveforms for optimal aluminum welding.
- Pulse ON/OFF: Activates or deactivates the pulse welding function.
- Balance: Adjusts the AC balance for cleaning action on aluminum.
- Start/Stop Current: Controls the initial and final current settings.
- Pre/Post Gas: Sets the pre-flow and post-flow times for shielding gas.
- 2T/4T Selection: Toggles between 2-stroke and 4-stroke trigger modes.
- L-KNOB / R-KNOB: Used to adjust welding parameters shown on the display.
- Channel Storage: Save and recall up to 6 sets of welding parameters.
7.2 Pulse Function
The pulse function provides a better welding effect by alternating between a peak current and a base current. This helps to control the weld puddle, reduce heat input, and improve penetration.

8. Welding Parameters
The LCD display allows for detailed adjustment of various welding parameters. Refer to the specifications table for ranges.
- Welding Current Range: 10-200A (TIG), 10-200A (MMA).
- Pre-Gas Time (S): 0-1 seconds.
- Up-Slope Time (S): 0-5 seconds.
- Peak Current (A): 10-200A.
- Pulse Frequency (Hz): 0.5-100 Hz.
- Pulse Width (%): 5-100%.
- Base Current (A): 10-200A.
- Down-Slope Time (S): 0-5 seconds.
- Crater-Filling Current (A): 10-200A.
- Post-Gas Time (S): 0-10 seconds.
- AC Frequency (Hz): 40-100 Hz.
- Clean Pulse Width (AC Balance): 20-50%.
For optimal results, consult welding guides for specific material types and thicknesses. The synergic control feature can assist beginners in setting appropriate parameters.
9. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust buildup. Use compressed air to clear internal components if necessary (ensure power is disconnected).
- Cable Inspection: Regularly inspect all cables, hoses, and connections for wear, damage, or loose fittings. Replace damaged parts immediately.
- Torch Maintenance: Clean the TIG torch components (collet, collet body, ceramic nozzle, tungsten electrode) regularly. Replace worn-out parts.
- Gas System: Check for gas leaks in the gas pipe and connections.
- Storage: Store the machine in a clean, dry environment when not in use.
10. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, contact technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply; Power switch off; Internal fault | Check power cable and outlet; Turn on power switch; Contact service |
| No arc ignition | Poor ground connection; Incorrect welding parameters; Tungsten electrode not sharp/contaminated; Gas flow issue | Ensure good ground contact; Adjust current/voltage; Sharpen/clean tungsten; Check gas supply and flow rate |
| Poor weld quality | Incorrect parameters; Contaminated workpiece; Insufficient shielding gas; Improper torch angle/travel speed | Adjust parameters; Clean workpiece; Check gas supply/flow; Adjust technique |
| Overheating indicator active | Exceeded duty cycle; Blocked ventilation; High ambient temperature | Allow machine to cool down; Clear ventilation openings; Operate in cooler environment |
11. Specifications
Technical specifications for the ANDELI LCD Smart Tig-250 Pro welding machine.

| Function/Parameter | Value |
|---|---|
| Power Supply Voltage (V) | 220V±15% |
| Frequency (Hz) | 50/60Hz |
| Efficiency (%) | 60% |
| No-Load Voltage (V) | 64 |
| Power Factor | 0.73 |
| Rated Input Power (KW) | 8.2 (TIG), 10 (MMA) |
| Rated Input Current (A) I1eff | 37 (TIG), 45 (MMA) |
| Welding Current Range (A) | 10-200 (TIG), 10-200 (MMA) |
| Efficiency Duty Cycle @40°C (TIG) | 60% @ 200A/18V |
| Efficiency Duty Cycle @40°C (MMA) | 60% @ 200A/18V |
| Protection Class | IP21S |
| Insulation Class | H |
| Cooling | AIR |
| Dimension (MM) | 485x210x340 |
| Net Weight (KG) | 12.5 |
| Material / Metal Processed | Carbon steel, Stainless steel, Aluminium, Titanium |
| Warranty | 1 Year |
| Key Selling Points | Easy to Operate |
12. Warranty and Support
The ANDELI LCD Smart Tig-250 Pro welding machine comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or service inquiries, please contact your authorized dealer or the manufacturer directly. Please have your purchase receipt and machine serial number ready when contacting support.