1. Introduction
The RunCam 5 Orange is a lightweight, high-definition sport camera designed for FPV racing and other action-oriented applications. It features a SONY IMX 377 (12MP) image sensor, capable of recording 4K video, and offers a wide 145° field of view. This manual provides essential information for setting up, operating, and maintaining your RunCam 5 Orange camera.
Figure 1: RunCam 5 Orange Sport Camera
2. Package Contents
Please verify that all items are present in your package:
- 1x RunCam 5 Orange Camera
- 1x Micro-USB Cable
- 2x Velcro Straps
- 1x User Manual
Figure 2: Package Contents
3. Setup
3.1. Inserting the MicroSD Card
The RunCam 5 Orange supports microSD cards up to 128GB. For optimal performance, especially with 2.7K50/2.7K60/1080P120 resolutions, a Samsung U3 card or equivalent (U3 or above) is recommended. For other resolutions, a U1 card or above is sufficient.
Important: Ensure the microSD card is formatted to FAT32. Incorrect formatting can lead to errors during operation.
3.2. Mounting the Camera
The RunCam 5 Orange has dimensions of 38x38x36mm, making it compatible with most existing 3D printed TPU mounts and brackets available on the market. Securely attach the camera to your drone or vehicle using an appropriate mount.
Figure 3: Camera in compatible mounts
3.3. Powering the Camera
The camera requires a USB power input of DC 5-15V. Connect the camera to a suitable power source using the provided Micro-USB cable.
4. Operating Instructions
4.1. Recording Video
The RunCam 5 Orange is capable of recording 4K video at 30 frames per second (fps) for up to 105 minutes, which is over 40% longer than similar cameras. Recording time for other resolutions also shows significant improvement.
Figure 4: 4K Recording Time Comparison
4.2. Adjusting Camera Settings (QR Codes)
You can easily change camera settings such as resolution, saturation, and exposure by generating QR codes through the official RunCam App. Simply scan the generated QR code with the camera to apply the desired settings.
Figure 5: Setting parameters with QR codes
4.3. NTSC / PAL Switching
The RunCam 5 Orange supports NTSC / PAL switching. This setting can typically be adjusted via the RunCam App using the QR code method described above, or through specific button combinations if available (refer to the app for detailed instructions).
5. Maintenance
5.1. Durability and Care
The RunCam 5 Orange is built with a Germany brand high-intensity PC case and features 3rd generation Corning Gorilla glass for enhanced durability. Lab tests show the camera survived over 120 drops from a 1.8-meter height.
- Keep the lens clean using a soft, lint-free cloth.
- Avoid exposing the camera to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the microSD card slot is free from dust and debris.
Figure 6: Durable Construction
5.2. MicroSD Card Maintenance
Regularly back up your footage and format the microSD card to maintain optimal performance and prevent data corruption. Always ensure the card is formatted to FAT32.
6. Troubleshooting
6.1. SD Card Errors
If you encounter issues with microSD card recognition or recording errors, ensure the card is:
- Properly inserted.
- Formatted to FAT32.
- A genuine, high-speed card (U3 recommended for higher resolutions).
- Not exceeding the maximum supported capacity of 128GB.
6.2. General Issues
If the camera is unresponsive or not functioning as expected, try the following:
- Ensure the camera is fully charged or receiving adequate power (DC 5-15V).
- Perform a factory reset via the RunCam App if possible.
- Check for firmware updates on the official RunCam website.
If problems persist, please contact RunCam customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | RunCam 5 Orange |
| Image Sensor | SONY IMX 377 (12MP) |
| Video Resolution | 4K @ 30fps / 2.7K@60fps / 2.7K@50fps / 1080P @ 120fps / 1080P @ 60fps / 1440P @ 60fps |
| Field of View (FOV) | 145° |
| Video File Format | MP4 |
| TV-OUT | Support |
| Communication Interface | Micro USB |
| MicroSD Card Supported | Up to 128G (U3 recommended for 2.7K50/2.7K60/1080P120; U1 for others). Must be FAT32 format. |
| WiFi | Nonsupport |
| Shutter | Auto 1/30, 1/60, 1/120, 1/240 |
| ISO | Auto/100/200/400/800/1600/3200 |
| EIS Supported | Only effective at 4K@30fps, 1080P@60fps for now |
| USB Power Input | DC 5-15V |
| Battery Capacity | 900mAh |
| Power Consumption | Max 620mA @5V |
| Dimension | 38*38*36mm |
| Net Weight | 56g (with battery) |
| Material | Metal, High-intensity PC case, Corning Gorilla glass |
| For Vehicle Type | Airplanes |
| RC Parts & Accs | Antennas |
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official RunCam website or contact your retailer. Keep your proof of purchase for any warranty claims.
9. Compliance Information
9.1. California Proposition 65 Warning
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
