recordio GAX-HM80

Contents

Recordio GAX-HM80 Professional DJ Flight Mixer

User Instruction Manual

1. Product Overview

The Recordio GAX-HM80 is a professional 8-channel DJ flight mixer with an integrated high-power amplifier, designed for outdoor stages, events, and other demanding audio environments. It features a durable waterproof suitcase design for portability and protection, along with a comprehensive set of controls for audio mixing, effects, and playback.

Recordio GAX-HM80 mixer in its protective case

Figure 1: Recordio GAX-HM80 Professional DJ Flight Mixer

Video 1: GAX-HM80 Product Demonstration and Setup

2. Setup Instructions

  1. Unpacking: Carefully open the flight case by releasing the latches. Ensure all components are present and undamaged.
  2. Power Connection:
    • Locate the power interface on the rear panel of the mixer.
    • Connect the provided power cable to the power interface and then to a suitable AC power outlet (220-240V).
    • Ensure the power switch is in the 'OFF' position before connecting.
  3. Speaker Connection:
    • The mixer features integrated power amplification. Connect your passive speakers to the 'SPEAKERS' outputs on the rear panel.
    • Use appropriate speaker cables with compatible connectors (e.g., Speakon or 1/4" TS jacks).
    • Connect 'RIGHT A' and 'RIGHT B' for right channel speakers, and 'LEFT A' and 'LEFT B' for left channel speakers.
  4. Audio Input Connection:
    • Connect microphones or other audio sources (e.g., instruments, media players) to the 'LINE IN / MIC' inputs (XLR or 6.5mm plug) on the top panel.
    • Each channel has its own input.
  5. Bluetooth Pairing:
    • Turn on the mixer.
    • Activate the Bluetooth function on the mixer (usually indicated by a 'Bluetooth' switch or button).
    • On your mobile device, search for available Bluetooth devices and select 'GAX-HM80' (or similar name) to pair.
Rear panel of the mixer showing power input, power switch, and speaker outputs

Figure 2: Rear Panel Connections (Power and Speakers)

3. Operating Instructions

Familiarize yourself with the control panel layout:

Detailed view of the mixer's control panel with labels for all inputs, knobs, and faders

Figure 3: Mixer Control Panel Layout

3.1 Channel Controls (Per Channel)

  • Gain Knob: Adjusts the input sensitivity for each channel. Set to an appropriate level to avoid clipping (PEAK LED).
  • Treble, Alto, Bass Knobs: 3-band equalizer for adjusting high, mid, and low frequencies of each channel.
  • Effect Knob: Controls the amount of effect (reverb, etc.) sent from this channel to the master effect processor.
  • Pan Balance Knob: Adjusts the stereo position (left/right) of the channel's signal.
  • Channel Switch Button (ON/OFF): Mutes or unmutes the channel.
  • Solo Button: Isolates the channel for monitoring through headphones without affecting the main mix.
  • Volume Adjustment (Fader): Controls the output level of each channel to the main mix.

3.2 Master Controls & Features

  • 7-Band Stereo Graphic Equalizer: Located on the right side, allows for fine-tuning the overall frequency response of the main mix.
  • Main Outputs (L/R): XLR outputs for connecting to external recording devices or additional sound systems.
  • Phones: Headphone output with dedicated volume control for monitoring.
  • CD/Tape Ret & Aux Return: Inputs for external audio devices or effects returns.
  • +48V Phantom Power: Button to supply power to condenser microphones. Ensure microphones are connected before activating.
  • Digital Effects (FX):
    • Built-in 16 digital effects (e.g., reverb, delay).
    • Use the 'PROGRAM (PUSH)' knob to select different effects (display shows effect number).
    • Adjust the 'PARAMETER' knob to modify effect characteristics.
    • The 'FX' fader controls the overall level of the effects in the main mix.
    Close-up of the mixer's digital effects section, showing the reverb preset display and controls

    Figure 4: Digital Effects Section

  • USB/MP3/Bluetooth Playback & Recording:
    • Insert a USB drive into the 'USB' port for MP3 playback.
    • Use the dedicated controls (play/pause, skip, stop/rec) to manage playback.
    • The mixer supports PC connection and USB recording.
    • Activate Bluetooth for wireless audio streaming (refer to Setup Instructions).
    Close-up of the mixer's MP3/USB section, showing the U-DISK MP3 display, USB port, and the +48V Phantom power button

    Figure 5: USB/MP3/Bluetooth Section and Phantom Power

4. Maintenance

  • Cleaning: Regularly wipe the mixer's surface with a soft, dry, lint-free cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents.
  • Storage: When not in use, store the mixer in its flight case in a cool, dry, and dust-free environment to protect it from physical damage and environmental factors.
  • Ventilation: Ensure the rear cooling fan is not obstructed during operation to prevent overheating.

5. Troubleshooting

Problem Possible Cause Solution
No sound output
  • Power not connected or switched on.
  • Master volume or channel faders are down.
  • Speaker cables disconnected or faulty.
  • Input source not connected or muted.
  • Check power connection and switch.
  • Raise master volume and relevant channel faders.
  • Verify speaker connections and test cables.
  • Ensure input source is active and connected correctly.
Distorted sound
  • Input gain too high (clipping).
  • Master volume too high.
  • Faulty cables or speakers.
  • Reduce input gain until PEAK LED no longer flashes.
  • Lower master volume.
  • Test with different cables/speakers.
Bluetooth connection issues
  • Mixer not in pairing mode.
  • Device too far from mixer.
  • Interference.
  • Ensure Bluetooth is activated on mixer and device.
  • Move device closer to the mixer.
  • Turn off other wireless devices.
Unwanted noise/hum
  • Ground loop.
  • Poor cable shielding.
  • Interference from other electronics.
  • Use balanced cables where possible.
  • Try plugging all audio equipment into the same power strip.
  • Replace suspect cables.
  • Move mixer away from power supplies or other noisy electronics.
Service flowchart illustrating steps for receiving/checking packages, handling goods questions, and resolving noise issues

Figure 6: General Service and Troubleshooting Flowchart

6. Specifications

Feature Specification
Model NumberGAX-HM80
Channels8
Rated Power600W x 2
Total Harmonic Distortion + Noise≤0.003% (1KHz, 0.775V)
Frequency Response20Hz-20KHz ±3dB
Gain ControlMono -60dB ~ -40dB
Signal to Noise Ratio≤80dB
Output Level19dBm (1KHz, THD=0.5%)
Residual Noise-105dB
Phantom Power+48V
Power SourceDC (via inbox adaptor)
Built-in BatteryNo
Dimensions (W x D x H)430mm x 220mm x 370mm
Single Gross Weight15.700 kg
MaterialWaterproof Plastic (case)
Diagram showing the dimensions of the mixer and a table of key technical specifications

Figure 7: Dimensions and Technical Specifications

7. User Tips

  • Gain Staging: Always set your input gain levels carefully. The PEAK LED should only flash occasionally on the loudest signals to prevent distortion.
  • Effect Usage: Experiment with the 16 built-in effects. Start with subtle amounts and gradually increase to find the desired sound without over-processing.
  • Equalization: Use the 3-band EQ on each channel and the 7-band graphic EQ on the master output to shape your sound. Small adjustments often make a big difference.
  • Cable Management: Keep your cables organized and use high-quality, shielded cables to minimize noise and interference.

8. Warranty and Support

8.1 Warranty Information

This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects. Damage caused by misuse, unauthorized disassembly, or improper handling is not covered.

Warranty and shipment information, stating a 1-year warranty from the date of purchase

Figure 8: Warranty Details

8.2 Customer Support

For any technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the manufacturer's customer support. Refer to the service flowchart for initial problem assessment.

© 2023 Recordio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.