MEISHIDA -520B

Contents

MEISHIDA -520B Smart Toilet User Manual

Model: -520B | Brand: MEISHIDA

1. Introduction

Thank you for choosing the MEISHIDA -520B Smart Toilet. This product is designed for installation in residential bathrooms, apartments, private homes, cottages, and dachas. It connects directly to the water supply and electrical grid. The toilet bowl is made of high-strength sanitary porcelain, ensuring durability and hygiene. This manual provides essential information for safe installation, operation, and maintenance of your smart toilet.

The MEISHIDA -520B smart toilet is crafted from high-quality, eco-friendly materials using time-tested technologies and modern design principles. It comes equipped with advanced features to enhance your bathroom experience.

2. Safety Information

Please read this manual carefully before operating the product and adhere to all instructions. The safety precautions listed below are crucial for your safety and must be followed.

2.1. Warnings (May lead to serious injury or death)

  • Do not disassemble, modify, or repair this product yourself. Unauthorized disassembly can lead to fire, electric shock, and injury.
  • Do not allow water or detergent to come into contact with the device body or power plug. This can cause fire or electric shock.
  • Do not install the product in areas with high humidity or where water can easily splash onto it. If used in a bathroom, ensure good ventilation with an exhaust fan to prevent fire or electric shock.
  • Ensure the power outlet meets the following requirements: maximum 2 kW load, installed as high as possible from the floor, and away from the bathtub.
  • Be aware of low-temperature burns. Adjust the seat temperature to a normal level, especially if you will be sitting for a long time, or if the user is a child, elderly, sick, or otherwise vulnerable.
  • Ensure the device is properly grounded. Lack of grounding can lead to electric shock in case of malfunction or leakage.
  • Ensure the power plug is securely inserted into a 220V/50Hz outlet. Loose contact can cause fire or overheating.
  • Ensure the live, neutral, and ground wires are correctly connected in the electrical outlet.

2.2. Cautions (May lead to physical or material damage)

  • Do not damage the power cord or the seat connection line. Do not bend, twist, or heat them. Do not place heavy objects on them. Continued use with damage can lead to fire, electric shock, or short circuits.
  • If the power cord is damaged, it must be replaced by the manufacturer, its service department, or qualified personnel.
  • Do not leave burning cigarettes or other hot objects near the product.
  • Do not place heavy objects on the toilet lid or force it open. This can damage the product. Broken parts can cause liquid leakage.
  • Do not insert fingers or other objects into the drying vent or block it. This can cause burns, electric shock, or fire.
  • Do not twist or break the inlet hose. This can cause water leakage.
  • Do not remove the water supply filter when the inlet valve is open. This will cause water to spray.
  • Do not flush items other than human waste and toilet paper. This can clog the toilet and cause overflow.
  • Ensure the inlet angle valve is tightly secured during installation. Failure to do so can cause water leakage.
  • In case of water leakage, close the angle valve to prevent damage from freezing. Freezing can damage the inlet hose and internal parts of the product.
  • During thunderstorms, disconnect the power supply. Failure to do so can lead to malfunction.
  • Do not use dry cloths or toilet paper to wipe the body, lid, or seat. This can scratch the product.
  • Avoid direct sunlight, as it can cause discoloration of plastic parts and reduce seat temperature.
  • Do not force open the toilet lid. This can damage the lid.
  • Do not force close the seat and lid. This can damage the product.
  • If you are traveling or not using the device for a long time, turn off the water and electricity supply.
  • If your local water quality is poor, regularly clean the mesh filter to prevent contamination and ensure proper water flow.
  • Do not urinate on the nozzle or the toilet body. This can cause malfunction.
  • For the remote control, avoid contact with water. Store it properly after use. Replace batteries if the signal becomes weak.

3. Product Overview

The MEISHIDA -520B Smart Toilet is a compact and intelligent solution for modern bathrooms, featuring a range of advanced functionalities for comfort and hygiene.

3.1. Key Features

  • Compact Design: With a length of only 52 cm, it saves approximately 25.7% of space compared to traditional toilets, making it ideal for smaller bathrooms.
  • Built-in Foam Shield: Creates a dense foam layer upon sitting to prevent splashing, deodorize, and effectively isolate bacteria.
  • Automatic Lid Opening/Closing: Equipped with a foot sensor for hands-free operation, offering convenience and hygiene.
  • Instant Heating System: Provides warm water instantly for washing, eliminating the need to wait.
  • Heated Seat: Adjustable temperature for comfort in all seasons.
  • Warm Air Drying: Adjustable warm air for a comfortable drying experience after washing.
  • Multiple Washing Modes: Includes bidet, feminine wash, pulsating mode, and massage function with adjustable water pressure and nozzle position.
  • Siphon Flushing: Powerful dual-siphon flush for thorough cleaning and disinfection.
  • UV Sterilization: Ensures a hygienic environment.
  • Digital LED Display: Shows real-time temperature and function status.
  • Ambient Lighting: Soft night light and decorative lighting on the control knob enhance the bathroom atmosphere.
  • Side Control Knob: Simple and intuitive control for essential functions, accessible to all users.
  • Water Pressure Adaptability: Features a built-in reservoir and booster system, allowing installation even with varying water pressures.
  • Safety Protections: Multiple layers of protection against temperature, leakage, overheating, and water ingress (IPX4 waterproof rating).

3.2. Product Dimensions

The MEISHIDA -520B smart toilet is designed for compact spaces. Refer to the diagram below for detailed measurements.

Product dimensions diagram
Figure 3.2.1: Product Dimensions (520mm length, 380mm width, 450mm height)
Smart toilet with 52cm length measurement
Figure 3.2.2: Compact 52cm length of the smart toilet.
Comparison of toilet seat sizes
Figure 3.2.3: Comparison showing the wider 95mm seat ring of the new generation toilet.

4. Installation

Before beginning installation, ensure you have all necessary tools and materials. Always disconnect the main water supply and electrical power before starting.

4.1. Pre-installation Preparation

Tools and Materials Required:

  • Adjustable wrench
  • Level
  • Square ruler
  • Sealant
  • Phillips screwdriver
  • Electric drill (for wooden floors) or impact drill (for concrete/tiled floors)
  • Hammer, pencil, or marker

Important Note: The manufacturer reserves the right to change product specifications without prior notice. For detailed installation instructions, please refer to the provided PDF manual: User Manual (PDF).

4.2. Installation Diagram and Dimensions

The following diagram illustrates the recommended layout and dimensions for water and drainage connections. All measurements are in millimeters (mm).

Installation diagram with dimensions for water and drain
Figure 4.2.1: Installation Diagram. Key dimensions: Drain outlet 350-400mm, Water outlet 240-280mm, Water outlet height 150mm, Electrical outlet 220V.

Note: By default, a wall drain is used. If a floor drain is required, please contact customer service for assistance.

Installation note for drain type
Figure 4.2.2: Important note regarding default wall drain and option for floor drain.

4.3. Toilet Installation Steps

  1. Install Shut-off Valve: Install the built-in shut-off valve on the cold water supply pipe. If an old shut-off valve is present, it must be removed.
    Shut-off valve installation diagram
    Figure 4.3.1: Diagram showing shut-off valve installation.
  2. Toilet Placement: Apply sealant to the top and bottom ends of the flange ring and place it into the drain opening.
  3. Water Connection: Connect the water hose to the shut-off valve and tighten it securely.
    Water hose connection diagram
    Figure 4.3.2: Diagram showing water hose connection to the shut-off valve.
  4. Sealant Application: Check for leaks between the bottom of the toilet and the floor. After confirming no leaks, apply sealant around the joint between the toilet base and the floor. Allow 24 hours for the sealant to cure before using the toilet.
    Sealant application diagram
    Figure 4.3.3: Diagram showing sealant application around the toilet base.

4.4. Electrical Connection

  1. Ensure the electrical outlet is properly grounded.
  2. Insert the power plug into the 220V outlet.
  3. Install Backup Battery Pack: Connect the battery pack to the toilet and install it in the rear part of the toilet.
    Electrical connection and battery pack installation
    Figure 4.4.1: Diagram showing electrical connection and backup battery pack installation.

4.5. Remote Control Installation

  1. Clean and degrease the desired mounting area for the remote control bracket.
  2. Peel off the protective film from the double-sided tape on the back of the bracket and firmly press it onto the prepared surface.
  3. Insert a new battery into the remote control (battery not included in the kit).
  4. Place the remote control onto the installed bracket.
    Diagram for remote control installation
    Figure 4.5.1: Diagram showing remote control installation steps.

4.6. Pre-use Check

  • Check if the nozzle and its water pipes are leaking. After drying all water pipes, check for leaks using absorbent paper.
  • Cover the seat presence sensor and check if an audible signal is emitted.
  • Verify that the washing, drying, and flushing functions operate normally.
  • Check if the soft-close buffer mechanism works correctly.
  • Ensure the seat presence sensor is active for cleaning and drying functions.
  • When cleaning, cover the front part of the nozzle opening to prevent water from splashing out.

5. Operation

The MEISHIDA -520B Smart Toilet offers a variety of functions controlled via the remote control and side knob.

5.1. Remote Control Functions

MEISHIDA -520B Smart Toilet remote control layout
Figure 5.1.1: Remote control layout with Russian labels.
  • Stop: Deactivates bidet/wash and feminine wash functions. Press and hold for 3 seconds to turn the toilet seat power on/off.
  • Posterior Wash: Activates bidet/wash with an audible signal when seated. Press again to activate/deactivate pulsating bidet.
  • Feminine Wash: Activates feminine wash with an audible signal when seated. Press again to deactivate feminine wash.
  • Dryer: Activates warm air drying. Default drying time is 3 minutes.
  • Seat Temperature: Adjusts seat temperature (room temperature, 34°C, 37°C, 40°C).
  • Water Temperature: Adjusts water temperature (no heating/room temperature, 34°C, 37°C, 40°C).
  • Dryer Temperature: Adjusts dryer temperature (no heating/room temperature, 45°C, 50°C, 55°C).
  • Water Flow (+/-): Adjusts water flow from level 1 to 4.
  • Nozzle Position (<>): Adjusts nozzle position during bidet/wash and feminine wash functions.
  • Flush: Automatically flushes when the user stands up. If the seat is empty, press the flush button on the remote or the side knob on the toilet.
  • Light: Toggles the soft night light on/off.
  • Lid: Opens and closes the toilet lid.

5.2. Side Control Knob

The side control knob provides intuitive access to essential functions, designed for ease of use by all ages.

Side view of smart toilet showing the control knob
Figure 5.2.1: Side control knob with illuminated ring and function icons.
Close-up of smart toilet side control knob
Figure 5.2.2: Close-up of the side control knob, showing icons for stop, posterior wash, bidet, dryer, and temperature/water flow adjustment.

The side knob can be used for power on/off, flush, bidet/wash, feminine wash, dry, and +/- adjustments.

Control knob lighting modes
Figure 5.2.3: The control knob features various lighting modes: monochrome, gradient, ribbon, and breathe.

5.3. Advanced and Hidden Functions

  • Foam Function: A quiet motor/pump activates a few seconds after sitting, generating a layer of foam on the water surface to prevent splashing and odor.
    Foam shield activated
    Figure 5.3.1: The built-in foam shield creates a dense foam layer.
  • Massage Function: The nozzle extends automatically. Water temperature alternates between warm and cool (e.g., 5-10 seconds warm, then 5-10 seconds cool) for a massage effect.
  • Automatic Lid Opening (Foot Sensor): When a user (especially a man) approaches the toilet, they can activate the foot sensor without touching it, and the seat will automatically lift. After use, another foot tap will lower the seat. This feature enhances hygiene and convenience.
    User activating foot sensor for automatic lid opening
    Figure 5.3.2: Hands-free automatic lid opening feature activated by a foot sensor.
  • Remote Control Pairing: To pair the remote with a specific toilet (useful for multiple units), after power-on self-check (display shows 88-37), press and hold the bidet/wash button for 30 seconds until a beep. Then press any button on the remote. A successful beep confirms pairing.
  • Code Reset: After power-on self-check (display shows 88-37), press and hold the feminine wash button for 30 seconds until a beep. The toilet will then emit four beeps after one minute, indicating the code is reset and can be controlled by any remote.
  • Remote Control Range Adjustment: While the toilet is in standby, press and hold the remote control or side button to stop operation. The setting mode will be entered. Briefly press the feminine wash button to adjust the sensor range (L1-L6, L1 is off, L6 is max range).
  • Lid Opening Speed Adjustment: While in standby, press and hold the remote control or side button to stop operation. Briefly press the "water pressure +" button to increase speed, or "water pressure -" to decrease speed (C1-C9, C1 slowest, C9 fastest).
  • Button Sensitivity Adjustment: While in standby, press and hold the remote control or side button to stop operation. Briefly press the "position +" button to increase sensitivity, or "position -" to decrease sensitivity (S1-S9, S1 lightest, S9 strongest).

5.4. Flush Adjustment

The toilet features adjustable flush settings for optimal cleaning.

  • Pulse Flush Adjustment: While in standby, press and hold the remote control or side button to stop operation. Briefly press the flush button to cycle through pulse flush modes (F1-F4, F1 lightest, F4 strongest).
  • Pump Flush Adjustment: Similar to pulse flush, adjust pump flush levels (F1-F4).

Default Flush Times (in seconds):

LevelPulse Flush UpPulse Flush DownPump Flush Up
F15s5s4s
F26s5s4s
F36s6s5s
F47s7s6s

5.5. Automatic Functions

  • Automatic Flush on Standing: The toilet automatically flushes when the user stands up from the seat. To enable/disable, press and hold the flush button on the remote control.
  • Automatic Bidet/Wash on Sitting: To enable/disable, press and hold the bidet/wash button on the remote control.
  • Automatic Lid Opening/Closing Switch: To enable/disable, press and hold the lid open button on the remote control.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your smart toilet.

6.1. General Cleaning

  • For regular cleaning of the toilet bowl, use soft sponges, brushes, cloths, and soapy water.
  • For limescale and rust removal, use specialized cleaning agents. Always follow the cleaner's instructions and do not leave it on the toilet surface for extended periods.
  • To prevent static electricity and dust accumulation, wipe the product with a damp cloth.
  • The toilet seat can be detached from the main body for easier cleaning.
  • Always disconnect power and unplug the device before any cleaning or maintenance.

6.2. Nozzle Cleaning

  • If the spray nozzle gets dirty, use a small brush (e.g., a toothbrush) to clean it. Do not press on the nozzle or pull it forcefully.
  • The nozzle rod extends automatically for manual cleaning.

6.3. Filter Maintenance

  • If the water quality in your area is poor, regularly clean the mesh filter to prevent contamination and ensure proper water flow.

6.4. Foam Liquid Reservoir

  • For effective cleaning during flushing, use additional foaming liquid. This liquid can be poured into a special reservoir within the toilet unit (included in the kit). The toilet will automatically add the necessary amount of foam during flushing.

7. Troubleshooting

If you encounter any issues with your smart toilet, please refer to the table below for common problems and solutions. If the problem persists, contact customer service.

ProblemDiagnosisSolution
Product not workingCheck for power / plug connection. If power leakage (protection indicator lit).Check connection. Unplug and replug. Reset leakage protection switch. If still not working, unplug and contact service center.
Nozzle not spraying waterWater supply off? Shut-off valve closed? Inlet filter clogged?Wait for water supply to resume. Open shut-off valve. Clean or replace filter.
Insufficient cleaning intensityWater supply pipe bent? Water pressure level set too low? Outlet filter clogged?Replace bent pipe. Adjust water pressure (refer to manual). Clean or replace filter.
Nozzle sprays unevenlyAbnormal operation.Disconnect nozzle for one minute, then reconnect.
Water temperature unsuitableWater temperature setting incorrect? Cold/warm massage function enabled?Adjust water temperature (refer to manual). Disable cold/warm massage function (refer to manual).
Cleaning device stops spraying frequentlySolenoid valve failure.Replace solenoid valve.
Remote control not workingRemote control battery low?Replace battery.
Seat temperature too low or not heatingTemperature setting incorrect? Energy-saving function enabled?Adjust temperature (refer to manual). Disable energy-saving function (refer to manual).
Seat or lid closes too quicklySoft-close function failure. Obstruction under seat?Contact service. Remove obstructions.
Washing function not working properlySeat presence sensor not fully covered? Power cut during wash? Seat sensor failure?Adjust sitting position. Disconnect nozzle for one minute, then reconnect. Contact service for sensor failure.
Seat/lid cannot open/close (auto models)Automatic soft-close function failure.1. Unplug for one minute. 2. If problem persists, contact service.
Low water pressure during flushFilter clogged? Water pressure too low? Pipe bent?Clean filter. Check water pressure (should be 3-4 bar). Straighten pipe.
No suction during flush (normal water flow)Air in drain pipe? S-trap blocked?Contact plumbing specialist. Contact plumbing specialist.
Dirty water during flushFlush valve failure.Contact service.

8. Specifications

Detailed technical specifications for the MEISHIDA -520B Smart Toilet.

FeatureSpecification
Nominal VoltageAC 220V ± 10%, 50Hz
Nominal Power (Instant Heating)Water temp. in 15°C, out 40°C, flow 700 ml/min, power 1280W.
Nominal Power (Heat Preservation)700W
Water Flow (Bidet)Approx. 700 ml/min
Water Flow (Feminine Wash)Approx. 700 ml/min
Water TemperatureRoom temp., 34°C, 37°C, 40°C (4 levels)
Water Heating MethodInstant heating / Heat preservation
Safety Devices (Water)Water temperature sensors (inlet/outlet), adhesion fuses, thermostats, leakage protection.
Seat TemperatureRoom temp., 34°C, 37°C, 40°C (4 levels)
Heater Power (Seat)Approx. 40W
Safety Devices (Seat)Temperature sensors, temperature fuses.
Warm Air TemperatureRoom temp., 45°C, 50°C, 55°C (4 levels)
Air Volume> 0.2 m³/min
Heater Power (Air Dryer)Avg. 220W (Max 350W)
Safety Devices (Air Dryer)Bimetallic strips, temperature fuses.
Nozzle MovementExtends forward and moves sideways by 1.5 cm.
Nozzle Position Range5-40°
Allowable Inlet Water Temperature+5°C to +40°C
Constant Water Pressure0.15 - 0.75 MPa (static). Approx. 5 liters in 15 seconds.
StructureOne Piece
MaterialCeramic
Weight31-40KG
Drainage PatternP-Trap
Installation TypeFloor Mounted
Flushing Flowrate3/6L
Flushing MethodSiphon Flushing
Buffer Cover PlateYes
Remote ControlIncluded
Flushing Button TypeSide-pressing One-part Form
Advanced FunctionRemote control
Toilet Bowl ShapeElongated
FeatureAutomatic Operation, Concealed Tank

9. User Tips

Based on user experiences, here are some helpful tips for using your MEISHIDA -520B Smart Toilet:

  • Installation: Many users found the installation straightforward, even without extensive plumbing experience. However, ensure you have the correct drain type (wall vs. floor) before ordering or installing. If a floor drain is needed, contact customer service.
  • Remote Control: The remote control is intuitive, and some users found the instructions unnecessary. It comes with Russian labels.
  • Foam Function: Consider purchasing additional foam liquid for continuous use of the foam shield feature.
  • Backlight: Note that the backlight color may not be changeable, and the aroma diffuser's operation might not be immediately obvious.
  • Customer Service: The seller is generally responsive and helpful with questions and issues, including providing videos for installation challenges.
  • Packaging: Products typically arrive well-packaged and intact.
  • Battery: The remote control requires a battery, which is usually not included in the kit.
  • Barcode: The product barcode is located inside the toilet lid.

10. Warranty and Support

The MEISHIDA -520B Smart Toilet comes with a 1-year warranty from the manufacturer. This warranty covers defects in materials and workmanship under normal use.

For any technical assistance, troubleshooting beyond what is covered in this manual, or warranty claims, please contact the seller or an authorized service center. Ensure you retain your purchase receipt and warranty card for service.

The manufacturer reserves the right to make changes to product specifications and components without prior notice, while maintaining the stated warranty period.

11. Product Video Demonstration

Watch this video for a visual demonstration of the MEISHIDA -520B Smart Toilet's features and operation.

Video 11.1.1: Demonstration of MEISHIDA -520B Smart Toilet features, including automatic lid, foam shield, and washing functions.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.