LS VISION LS-4GS20L-20X

Contents

LS VISION 20X Optical Zoom Dual Screen Solar Camera User Manual

Model: LS-4GS20L-20X

1. Introduction

Thank you for choosing the LS VISION 20X Optical Zoom Dual Screen Solar Camera. This advanced surveillance camera is designed for outdoor use, offering high-resolution 4K UHD video, dual-lens monitoring, and flexible connectivity options (4G or WiFi). Powered by a solar panel and built-in battery, it provides continuous operation with features like PTZ control, 20X optical zoom, dual PIR humanoid detection, two-way audio, and multiple storage options. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device.

2. Safety Information

⚠️ Disclaimer: Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

  • Ensure the camera is installed securely to prevent accidental falls.
  • Do not expose the camera to extreme temperatures or corrosive environments.
  • Keep the solar panel clean and free from obstructions to ensure efficient charging.
  • Handle the SIM card and SD card slots with care to avoid damage.
  • Only use accessories approved by LS VISION.

3. Product Overview

The LS VISION Solar Camera features a robust design with dual lenses for comprehensive monitoring, powered by an integrated solar panel.

LS VISION 20X Optical Zoom Dual Screen Solar Camera

Figure 1: LS VISION 20X Optical Zoom Dual Screen Solar Camera

3.1. Key Features

  • 4K UHD Resolution: Delivers crisp, clear video footage.
  • Dual Screen & Dual Lens: Provides both a wide-angle view and a zoomed-in view simultaneously.
  • 20X Optical Zoom: Allows for detailed capture of distant objects.
  • Solar Powered: 9W solar panel with 3m extension cord for flexible placement and continuous power.
  • Built-in Battery: High-capacity 15600mAh battery for extended operation.
  • Connectivity: Available in 4G SIM card version (supports multiple countries) or 2.4G WiFi version. Note: 4G and WiFi versions are separate and do not work simultaneously.
  • PTZ Control: Pan 355°, Tilt 100° for wide area coverage.
  • Dual PIR Humanoid Detection: Advanced motion detection with AI humanoid recognition for accurate alerts.
  • Auto Tracking: Automatically tracks detected human figures.
  • Two-Way Audio: Built-in microphone and speaker for real-time communication.
  • Night Vision: Supports full-color night vision (with white lights) and infrared night vision (black and white) up to 40 meters.
  • Storage: Supports TF card storage (up to 128GB, not included) and cloud storage (paid subscription).
  • App Control: Remote viewing and playback via the Ubox app (iOS/Android).
  • Bluetooth Quick Network Configuration: Simplifies initial setup.
  • IP66 Waterproof: Designed for outdoor use, resistant to dust and water.

3.2. Component Identification

LS VISION Solar Camera Component Diagram

Figure 2: Camera Components and Dimensions

Refer to Figure 2 for the location of the following components:

  • Solar Panel: Charges the internal battery.
  • Antenna: For 4G or WiFi signal reception.
  • Wide-angle Lens: Provides a broad overview.
  • PTZ Lens: The main camera with pan, tilt, and zoom capabilities.
  • White Light: Provides illumination for full-color night vision and acts as a floodlight.
  • PIR (Passive Infrared) Sensors: Detects heat signatures for motion detection.
  • Infrared Lens: For black and white night vision.
  • OFF/ON Switch: Power control for the camera.
  • SD Card Slot: Insert a TF card for local storage.
  • Reset Button: Used to reset the camera to factory settings.
  • SIM Card Slot: (For 4G models only) Insert a 4G SIM data card.
  • 3m Extension Cable: Connects the solar panel to the camera for flexible installation.

3.3. Product Video Overview

Video 1: Product demonstration showcasing dual screen, night vision, and 360-degree monitoring capabilities.

4. Specifications

AttributeValue
Brand NameLS VISION
Model NumberLS-4GS20L-20X
ConnectivityWiFi, 4G (model dependent)
Supported Mobile SystemsiOS, Android
Supported Operating SystemsNo (mobile app based)
Viewing Angle360° (PTZ)
Lens (mm)2.8mm (wide-angle), 5-50mm (PTZ)
Focal Length2.8mm
SensorCMOS
Sensor Size1/2.8''
Sensor BrandHISILICON
Audio Output1CH BNC (Two-Way Audio)
InstallationSide, Normal
TechnologyInfrared, Pan / Tilt / Zoom
Alarm TypeLocal Alarm (via app notification)
Smart Home PlatformOther (Ubox App)
Internal StorageNone (supports up to 128GB TF card)
CertificationCE
OriginMainland China
Waterproof RatingIP66
Solar Panel Power9W
Battery Capacity15600mAh

5. Setup Guide

5.1. Unboxing and Initial Inspection

  1. Carefully open the package and remove all components.
  2. Verify that all items listed in the packing list are present and undamaged.
  3. Charge the camera's internal battery using a USB power adapter for at least 8 hours before initial use, especially if the solar panel will not receive immediate direct sunlight.

5.2. SIM Card / SD Card Installation (if applicable)

  • For 4G Models: Locate the SIM card slot (refer to Figure 2). Insert a compatible 4G SIM data card with an active data plan. Ensure the card is inserted correctly according to the diagram or markings.
  • 4G Camera Setup with SIM Card

    Figure 3: 4G Camera requires a SIM card and does not support WiFi.

  • For all Models (SD Card): Locate the SD card slot (refer to Figure 2). Insert a TF (microSD) card (up to 128GB, not included) for local video storage.

5.3. Mounting the Camera and Solar Panel

Choose a mounting location that provides a clear view of the area you wish to monitor and ensures the solar panel receives maximum direct sunlight throughout the day.

  1. Camera Placement: Mount the camera securely on a wall or pole using the provided mounting bracket and screws. Ensure it is within range of your WiFi network (for WiFi models) or has good 4G signal reception (for 4G models).
  2. Solar Panel Placement: The solar panel can be mounted directly above the camera or separately using the 3m extension cable for optimal sun exposure.
  3. Solar Panel Extended Installation

    Figure 4: Flexible solar panel installation with extension cable.

  4. Connect the solar panel's cable to the camera's power input.

5.4. App Installation and Network Configuration

  1. Download the Ubox App: Search for "Ubox" in your smartphone's app store (iOS or Android) and install it.
  2. Register/Log In: Open the Ubox app and create a new account or log in if you already have one.
  3. Power On Camera: Turn on the camera using the OFF/ON switch.
  4. Add Device: In the Ubox app, tap "Add Device" or the "+" icon.
  5. Bluetooth Quick Network Configuration: The camera supports Bluetooth for quick setup. Follow the on-screen prompts in the Ubox app to connect to the camera via Bluetooth.
  6. Bluetooth Quick Network Configuration

    Figure 5: Bluetooth quick network configuration via Ubox app.

  7. Network Setup:
    • For WiFi Models: Select your 2.4GHz WiFi network and enter the password. The camera does not support 5GHz WiFi.
    • 2.4G WiFi Camera Version

      Figure 6: WiFi Camera requires 2.4G WiFi connection and does not support 4G SIM cards.

    • For 4G Models: The camera will automatically connect to the 4G network if a valid SIM card is inserted and has signal.
  8. Once connected, you can name your camera and begin monitoring.

6. Operating Instructions

6.1. Live View and Playback

Open the Ubox app to access the live feed from your camera. You can switch between the wide-angle and PTZ lens views. Recorded footage can be accessed and played back from the app, whether stored on the SD card or in the cloud.

Dual Screen Solar Linkage Camera

Figure 7: Dual Screen feature showing 10X Optical Zoom and Fixed-Focus Lens views.

6.2. PTZ Control and Zoom

From the Ubox app, you can remotely control the camera's pan (355° horizontally) and tilt (100° vertically) movements. Use the zoom function to achieve 20X optical zoom for detailed viewing.

PTZ Control Diagram

Figure 8: PTZ Control with 355° horizontal and 90° vertical movement.

20X Zoom Feature

Figure 9: App interface for 20X optical zoom and focus adjustment.

6.3. Night Vision Modes

The camera offers two night vision modes:

  • Infrared Night Vision: Provides clear black and white images in low-light conditions.
  • Full-Color Night Vision: Activates the white lights to provide color images at night.

You can switch between these modes or set it to intelligent mode for automatic selection via the Ubox app.

Dual Light Night Vision

Figure 10: Comparison of Infrared Night Vision and Intelligent Full Color Night Vision.

6.4. Motion Detection and Humanoid Tracking

The camera utilizes dual PIR sensors and AI for accurate humanoid detection. When motion is detected, you will receive instant alerts and notification pushes to your Ubox app. The camera can also automatically track detected human figures.

Humanoid Detection Alarm

Figure 11: Ubox app notification for humanoid detection.

Humanoid Tracking

Figure 12: Camera demonstrating humanoid tracking.

6.5. Two-Way Audio

Use the two-way audio feature in the Ubox app to communicate with people near the camera. This is useful for greeting visitors or deterring intruders.

Two-Way Audio Feature

Figure 13: App interface showing two-way audio communication.

6.6. Recording Modes and Storage

The camera supports a low-power recording mode where it remains in auto-sleep until motion is detected. Upon detection, it wakes up, records, and sends an app notification. You can store recordings on a local TF card (up to 128GB) or subscribe to cloud storage for remote access and backup.

Low Power Recording Mode

Figure 14: Low power recording mode with PIR detection and app wake-up.

Two Storage Modes

Figure 15: SD Card Storage and Cloud Storage options.

6.7. Multi-User Remote Access

You can share access to your camera with multiple users through the Ubox app, allowing family members or trusted individuals to view the live feed and recordings.

Multi-Users Remote Access

Figure 16: Multiple users accessing the camera feed remotely.

7. Maintenance

  • Cleaning: Regularly clean the camera lenses and solar panel with a soft, damp cloth to ensure optimal image quality and charging efficiency. Do not use harsh chemicals.
  • Battery Care: The built-in battery is designed for long-term use with solar charging. If the camera is stored for extended periods, ensure it is fully charged before storage and recharged periodically to maintain battery health.
  • Firmware Updates: Check the Ubox app regularly for firmware updates. Keeping your camera's firmware up-to-date ensures you have the latest features and security enhancements.
  • IP66 Rating: While the camera is IP66 waterproof, avoid submerging it in water or exposing it to high-pressure water jets.

8. Troubleshooting

Q: The camera is not powering on.
A: Ensure the OFF/ON switch is in the 'ON' position. Check if the solar panel is receiving sufficient sunlight or if the battery needs charging via a USB power adapter.
Q: The camera is not connecting to the network.
A:
  • For WiFi models: Ensure your WiFi network is 2.4GHz. Check the WiFi signal strength at the camera's location. Re-enter the WiFi password in the Ubox app.
  • For 4G models: Verify that the SIM card is correctly inserted, has an active data plan, and has good signal reception. Note that 4G and WiFi connectivity are mutually exclusive; the camera supports one or the other, not both simultaneously.
  • Try using the Bluetooth quick network configuration feature in the Ubox app again.
Q: Motion detection alerts are not being received.
A: Check the motion detection settings in the Ubox app. Ensure notifications are enabled for the app on your smartphone. Verify that the camera's PIR sensors are not obstructed.
Q: The camera is not recording.
A: Check if an SD card is inserted and properly formatted. Verify that the SD card has sufficient free space. If using cloud storage, ensure your subscription is active.
Q: The zoom function is not working.
A: Ensure you are using the PTZ lens view in the Ubox app and that the zoom controls are being correctly manipulated. The camera features 20X optical zoom.
Q: The night vision is unclear.
A: Clean the camera lenses. Ensure there are no obstructions blocking the infrared LEDs or white lights. Check the night vision mode settings in the app.

9. User Tips

  • Optimal Solar Charging: Position the solar panel to receive at least 4-6 hours of direct sunlight daily for continuous operation. Use the 3m extension cable if necessary to achieve this.
  • Network Choice: If you have stable WiFi coverage, the WiFi version is generally simpler to set up. If the installation area lacks WiFi, the 4G version provides excellent flexibility, but remember to use a compatible SIM card with a data plan.
  • Dual Screen Advantage: Utilize the dual-screen feature to keep an eye on a wide area with the fixed lens while simultaneously zooming in on specific points of interest with the PTZ lens.
  • PIR Sensitivity: Adjust the PIR detection sensitivity in the Ubox app to minimize false alarms from small animals or swaying branches.
  • Scheduled Arming: Take advantage of the arbitrary arming time setting to activate detection and alerts only when needed, conserving battery life and reducing unnecessary notifications.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the LS VISION customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.