1. Introduction
Thank you for choosing the GIRIER T Series Smart Wall Switch. This intelligent switch supports Tuya Zigbee and Wi-Fi connectivity, allowing seamless integration with your smart home ecosystem. Control your lighting effortlessly via the Tuya APP or Smart Life APP, and enjoy hands-free operation with voice assistants like Amazon Alexa and Google Home. This manual provides detailed instructions for installation, setup, and operation to ensure a safe and convenient experience.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK!
- Always turn off the power at the circuit breaker before installation or maintenance.
- Installation must be performed by a certified and competent electrician in accordance with local electrical codes and this user manual.
- Do not operate the switch if power is on during installation.
- Ensure all wiring connections are secure and properly insulated.
3. Specifications
The following specifications apply to the GIRIER T Series Smart Wall Switch (Neutral Wire Required model):
| Attribute | Specification |
|---|---|
| Product Name | Smart Wi-Fi Switch |
| Type | Wi-Fi Button Switch |
| Model Number | ZS-TYT□-SM-□1W- (e.g., ZS-TYT1-SM-1W- for 1-gang) |
| Neutral Wire Requirement | Yes |
| Rated Voltage | AC100-240V 50-60Hz |
| Contact Capacity | 10A~(Pure resistive load) TV-8 |
| Rated Load | 500W/gang |
| Capacitor Requirement | No |
| Button Life | 100,000+ Times |
| Working Temperature | -10~40℃ |
| Working Humidity | 0-90%RH, non-condensing |
| Load Type | Energy-saving lamps, Incandescent lamps, LED lamps, fluorescent lamps |
| Hub Requirement | NO (for Wi-Fi version) |
| Certification | CE, RoHS |
| Origin | Mainland China |
For models requiring a single live wire (without neutral), the model number is ZS-TYT□-SFM-□1W- with a contact capacity of 12A and rated loads of 200W/L1, 500W/L2, 500W/L3. A capacitor may be required for stable operation in some single live wire setups.
4. Installation
Before beginning installation, ensure the power is OFF at the circuit breaker. Operating with power on is strictly prohibited.
4.1. Installation Steps Overview
- Wiring the switch.
- Install the Tuya APP or Smart Life APP (if not already installed).
- Connect your Zigbee gateway to the 2.4G wireless Wi-Fi network (if using Zigbee model).
- Add the Zigbee/Wi-Fi switch to the app.
- Set up Multi-control (optional).
4.2. Physical Installation
- Remove the Faceplate: Gently pry the button panel apart from the main body of the switch with your hands.
- Connect Wires: Connect the electrical wires according to the appropriate wiring diagram below. Ensure all connections are secure. Terminals without loads can be left unconnected.
- Fix the Switch: Secure the switch body to the junction box using screws.
- Reattach Faceplate: Align the button panel with the corresponding recess and press it firmly until it clicks into place.
4.3. Wiring Diagrams
Red is Live wire (L), blue is Neutral wire (N), and yellow is the lamp load wire. Green is used for double control signal wire.
4.3.1. Neutral Wire and Live Wire Wiring
This method requires both a live wire and a neutral wire for operation.
4.3.2. Single Live Wire Wiring
If your switch has an optional 'N' terminal, it can connect with or without a neutral wire. Otherwise, a neutral wire is a must. If using single live wire and the switch does not operate normally, an extra capacitor may be required.
4.3.3. Capacitor Connection for Single Live Wire
If the single live wire switch does not function correctly, connect a capacitor in parallel with the lamp connected to L1.
4.3.4. Double Control Switch Wiring (Single Live Wire)
For double control setups with single live wire, refer to the diagram below. The 'N' terminal is optional.
5. App Setup and Device Pairing
5.1. Download the App
Scan the QR codes below or search for "Tuya Smart" or "Smart Life" in your mobile app store to download the application. The switch is compatible with both apps.
5.2. Add Zigbee Gateway (for Zigbee models)
If you are using a Zigbee model, ensure your Zigbee gateway is connected to your 2.4G wireless Wi-Fi network and has been added to the Tuya Smart or Smart Life app. Refer to your Zigbee gateway's manual for specific instructions on adding it to the app.
5.3. Pair the Smart Switch
- Enter Pairing Mode: After powering on, the switch should automatically enter pairing mode, indicated by the purple and blue indicator light flashing alternately. If not, long press any switch button for 5 seconds to reset the switch and enable pairing mode.
- Add Device in App: Open the Tuya Smart or Smart Life app. Tap the "+" icon in the top right corner and select "Add Device".
- Connect: The app will automatically search for the switch. Once discovered, click on the switch to add it. Ensure your Zigbee gateway (if applicable) is already added to the app.
- Complete Setup: Click "Completed" once the device is successfully added.
Official product video demonstrating the installation process, app pairing, and various smart control features of the GIRIER Smart Button Switch.
6. Operating Instructions
6.1. LED Indicator Lights
The smart switch features an indicator light to show its status:
| LED Status | Definition |
|---|---|
| Blue backlight is always on | Switch is OFF |
| Green backlight is always on | Switch is ON |
| Blue and purple backlight flashing alternately | Waiting for network access after reset (pairing mode) |
| Purple light is always on | Zigbee gateway connection failed |
6.2. Remote Control
Once paired with the Tuya Smart or Smart Life app, you can control your lights from anywhere, at any time, using your smartphone.
6.3. Voice Control
Integrate your smart switch with Amazon Alexa or Google Home for hands-free voice control. Link your Tuya Smart/Smart Life account in the Alexa or Google Home app and use simple voice commands to turn lights on/off or activate scenes.
6.4. Timing Function (Schedules)
Set schedules to automatically turn the switch on or off at desired times, helping to save energy and automate your home lighting.
6.5. Relay Status Settings
Configure the switch's behavior after a power outage. You can choose for the light to turn ON, turn OFF, or remember its last status when power is restored.
6.6. Multi-Control Association
Easily achieve wireless 2-way or multi-way control with other Tuya smart light switches. In the app, navigate to the switch interface, tap the top right corner icon, and select "Multi-Control Association". Choose the buttons you wish to link for multi-control functionality.
6.7. Smart Linkage and Group Control
- Smart Linkage: Connect your smart wall switch to other Tuya Smart devices (e.g., door sensors, motion sensors) to create automated scenes, such as lights turning on when a door opens or motion is detected.
- Group Control: Create groups of switches within the app to control multiple lights simultaneously with a single tap. You can also share control with family members.
7. User Tips
- For optimal performance, ensure your Wi-Fi network is stable and within range of the switch.
- Regularly check the app for firmware updates to ensure your switch has the latest features and security enhancements.
- When setting up voice control, use clear and concise commands for better recognition by Alexa or Google Home.
8. Troubleshooting
- Switch not responding / Not turning on/off:
- Check if the power is supplied to the switch.
- Verify wiring connections are correct and secure.
- If using a single live wire model and experiencing issues, ensure a capacitor is correctly installed in parallel with the lamp (refer to section 4.3.3).
- Check the LED indicator light for status (e.g., blue/purple flashing for pairing mode, purple for connection failure).
- Cannot connect to Wi-Fi / App not finding device:
- Ensure your Wi-Fi network is 2.4GHz. This switch does not support 5GHz Wi-Fi.
- Make sure the switch is in pairing mode (blue and purple indicator light flashing alternately). If not, long press any button for 5 seconds to reset.
- Bring your smartphone closer to the switch and Wi-Fi router during pairing.
- Verify your Zigbee gateway (if applicable) is properly connected and added to the app.
- Voice control not working:
- Ensure the smart switch is successfully paired with the Tuya Smart/Smart Life app.
- Verify that your Tuya Smart/Smart Life account is linked correctly with your Alexa or Google Home account.
- Check your internet connection and the status of your voice assistant device.
- Use the exact device names configured in the app when giving voice commands.
9. Maintenance
- Clean the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the switch to excessive moisture or direct water contact.
- Ensure the switch is not obstructed by furniture or other objects that could interfere with its operation or heat dissipation.
10. Warranty & Support
10.1. Warranty Information
This product comes with a one-year free warranty and lifetime paid maintenance service. The warranty covers manufacturing defects under normal use. Please note the following conditions:
- To request warranty service, you must provide valid sales vouchers and a completed warranty card.
- The warranty does not cover damage caused by improper use, accidents, or repairs performed by unauthorized individuals.
- Products that have been disassembled, modified, or repaired without authorization from GIRIER are not eligible for warranty coverage.
For further details, you may refer to the official user manual PDF: GIRIER T Series Intelligent Zigbee Wall Switch User Manual (PDF).
10.2. Customer Support
If you encounter any issues or have questions regarding your GIRIER Smart Wall Switch, please contact GIRIER Intelligent Store customer service. We are committed to providing assistance and support.
