1. Introduction
Thank you for purchasing the SING-E ZQS8302 Portable PA Speaker System. This powerful and versatile speaker is designed for outdoor events, parties, and various audio playback needs. Featuring triple 8-inch woofers, RGB lighting, a wireless microphone, and multiple connectivity options, it delivers an immersive audio experience. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
2. Safety Information
- Do not expose the speaker to extreme temperatures, humidity, or direct sunlight.
- Keep the speaker away from water and other liquids. This product has an IP65 waterproof standard, meaning it is protected from dust and low-pressure water jets, but it is not submersible.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Use only the specified charging cable and power adapter to avoid damage to the battery.
- Keep out of reach of children.
- Ensure proper ventilation when operating the speaker.
3. Package Contents
Please check the box for the following items:
- ZQS8302 Portable PA Speaker System (x1)
- Wireless Microphone (x1)
- Remote Control (x1)
- USB Charging Cable (x1)
4. Product Overview
4.1 Speaker Components
- Triple 8-inch Woofers: For powerful sound output.
- RGB Lighting: Integrated party lights for visual effects.
- Top Control Panel: Buttons and ports for various functions.
- Integrated Microphone Storage: Convenient slot on the side for the wireless microphone.
- Wheels and Handle: For easy portability.
4.2 Control Panel and Ports
The top panel of the speaker houses all the main controls and input/output ports. Refer to the image below for a visual guide.
(Note: Specific labels for buttons and ports are not provided in the source data, but generally include Power, Mode, Play/Pause, Volume, Track Skip, USB/TF Card Slots, AUX Input, Microphone Input, Charging Port.)
5. Setup
5.1 Initial Charging
Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and a suitable USB power adapter (not included). The charging indicator will typically show red while charging and turn off or change color when fully charged. Charging time is approximately 1-3 hours.
5.2 Powering On/Off
Press and hold the Power button on the control panel to turn the speaker ON or OFF.
6. Operating Instructions
6.1 Mode Selection
Press the 'Mode' button on the control panel or remote control to switch between available modes: Bluetooth (BT), USB, TF Card, FM Radio, and AUX.
6.2 Bluetooth (BT) Mode
- Turn on the speaker. It will automatically enter Bluetooth pairing mode (a voice prompt or indicator light may confirm this).
- Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for available Bluetooth devices and select "ZQS8302" from the list.
- Once paired, the speaker will confirm the connection, and you can start playing audio from your device.
6.3 USB/TF Card Mode
- Insert a USB flash drive or TF (Micro SD) card into the respective slot on the control panel.
- The speaker will automatically switch to USB or TF Card mode and begin playing audio files. If not, press the 'Mode' button to select the correct mode.
- Use the Play/Pause, Next Track, and Previous Track buttons on the speaker or remote control to manage playback.
6.4 FM Radio Mode
- Press the 'Mode' button to switch to FM Radio mode.
- Press the Play/Pause button once to automatically scan and save available FM stations.
- Use the Next Track and Previous Track buttons to navigate between saved stations.
6.5 AUX Input Mode
- Connect an external audio device (e.g., MP3 player, laptop) to the speaker's AUX input port using a 3.5mm audio cable (not included).
- Press the 'Mode' button to switch to AUX mode.
- Audio will now play through the speaker from your connected device. Control playback from the external device.
6.6 Wireless Microphone Usage
- Ensure the wireless microphone has fresh batteries (if applicable) and is powered on.
- The microphone should automatically connect to the speaker. If not, check the microphone's pairing instructions.
- Adjust the microphone volume using the dedicated control on the speaker's top panel (if available) or the main volume control.
6.7 TWS (True Wireless Stereo) Function
The TWS function allows you to pair two ZQS8302 speakers together for a stereo sound experience.
- Ensure both ZQS8302 speakers are powered on and in Bluetooth mode, but not yet paired with any device.
- On one of the speakers (this will be the primary speaker), press and hold the TWS button (if available) or a designated pairing button. The speaker will emit a sound indicating it's searching for another TWS speaker.
- The two speakers will automatically connect to each other. A confirmation sound will indicate successful pairing.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in section 6.2. Audio will play in stereo through both speakers.
6.8 Party Lights (RGB Lighting)
The speaker features integrated RGB lighting. There may be a dedicated button on the control panel or remote to cycle through different light modes or turn them on/off. Refer to the control panel diagram (Figure 4.3) for the specific button.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% every few months.
- Microphone Care: Store the wireless microphone in its designated slot on the speaker to prevent loss or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low battery. | Charge the speaker fully. |
| No sound from speaker. | Volume too low; incorrect mode selected; device not connected. | Increase volume; switch to correct mode (BT, USB, AUX); ensure device is properly paired/connected. |
| Bluetooth pairing fails. | Speaker not in pairing mode; device too far; interference. | Ensure speaker is in BT mode and discoverable; move device closer; restart both speaker and device. |
| Microphone not working. | Microphone off; low battery in mic; mic not paired. | Turn on microphone; replace mic batteries; ensure mic is paired with speaker. |
| TWS pairing fails. | Speakers not in TWS pairing mode; too far apart. | Ensure both speakers are in BT mode and initiate TWS pairing on one; keep speakers close during pairing. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | ZQS8302 |
| Speaker Unit | 3 x 8-inch Full-Range Woofers |
| Output Power | 80W (40W listed in product features) |
| PMPO | 50-100W |
| Battery | 3.7V / 3600mAh Rechargeable Lithium-ion |
| Battery Charging Time | 1-3 hours |
| Estimated Battery Life | 10-15 hours |
| Communication | Bluetooth v5.1, USB, TF Card, AUX |
| Frequency Range | 2KHz-20KHz |
| Features | Phone Function, LED Flashing Light (RGB), TWS, FM Radio, Wireless Microphone Support |
| Waterproof Standard | IP65 |
| Material | PP |
| Product Dimensions (LxWxH) | 305 x 305 x 937 mm |
| Product Weight | 8 KG |
10. User Tips
- For optimal sound quality, ensure the speaker is placed on a stable, flat surface.
- When using the wireless microphone, keep it within a reasonable range of the speaker to avoid signal dropouts.
- Experiment with different music genres to appreciate the full-range audio capabilities of the triple 8-inch woofers.
- The remote control offers convenient operation from a distance, especially useful during parties.
- To conserve battery life, turn off the RGB lighting when not needed.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
