1. Introduction
Thank you for choosing the llano 30W 3-Channel Battery Charger. This high-performance charger is designed for professional photographers, offering efficient and simultaneous charging for up to three camera batteries. With its 30W fast charging capability and intelligent power distribution, you can quickly recharge your batteries and ensure you're always ready for your next shoot. This manual provides detailed instructions for safe and effective use of your new charger.
2. Package Contents
Please check the package for the following items:
- 1 x llano 3-Channel Battery Charger
- 1 x Type-C Charging Cable (1 meter)
- 1 x Instruction Manual
3. Product Features
- 3-Channel Simultaneous Charging: Efficiently charges up to three batteries at once, saving valuable time.
- 30W Fast Charging: Supports rapid charging, capable of fully charging three 2520mAh batteries in approximately 3 hours.
- Wide Compatibility: Designed for Sony NP-FZ100, Canon LP-E6NH, and NP-W126S camera batteries. Compatible with both original and third-party batteries.
- Intelligent LED Indicators: Each charging channel (CH1, CH2, CH3) features a four-grid LED display (25%, 50%, 75%, 100%) to show real-time charging progress.
- Advanced Safety Protections: Incorporates multiple safety mechanisms including temperature control, cell protection, overvoltage protection, charging protection, overcurrent protection, flame retardant protection, short circuit protection, and overpower protection.
- Durable Construction: Made from a combination of aluminum and ABS materials for enhanced durability and heat dissipation.
- Type-C Fast Charging Interface: Utilizes a modern Type-C port for power input, supporting PD/QC fast charging protocols.
4. Specifications
| Attribute | Detail |
|---|---|
| Product Name | llano 30W 3-Channel Camera Battery Charger |
| Compatible Batteries | Sony NP-FZ100, Canon LP-E6/E6N/E6NH, NP-W126S |
| Input Interface | USB-C (PD/QC compatible) |
| Input Voltage/Current | 5V-3A, 9V-3A, 12V-2.5A |
| Output (5V-3A Input) | CH1: 8.4V (8.7V)-1A; CH2/CH3: 8.7V (8.4V)-0.5A |
| Output (12V-2.5A Input) | CH1: 8.4V (8.7V)-1.5A; CH2/CH3: 8.7V (8.4V)-1A |
| Total Power | 30W |
| Material | Aluminum + ABS |
| Product Dimensions | 102 x 72 x 50 mm |
| Net Weight | Approx. 200g |
| Cable Type | Type-C Charging Cable (1m) |
| Warranty | 3 years |
5. Setup Instructions
- Connect to Power: Use the provided Type-C charging cable to connect the charger's PD-IN port to a compatible USB power adapter (not included). For optimal fast charging, use a 30W or higher PD/QC compatible adapter.
- Power On: Once connected, the charger's LED indicators will briefly light up, indicating it is powered on and ready for use.
- Insert Batteries: Carefully insert your camera batteries into the designated charging slots (CH1, CH2, CH3). Ensure the battery is correctly oriented according to the slot's shape.
6. Operating Instructions
- Charging Process: Once batteries are inserted and the charger is powered, the corresponding LED indicators for each channel will illuminate to show the charging status.
- LED Indicators:
- 25% Light: Indicates slow charge state or 0-25% charged.
- 50% Light: Indicates 25-50% charged.
- 75% Light: Indicates 50-75% charged.
- 100% Light: Indicates 75-100% charged.
- All Lights Solid: Battery is fully charged.
- Charging Multiple Batteries: The charger intelligently distributes power across all three channels. Charging one battery will be faster than charging three simultaneously, but all will receive efficient power.
- Charging Flexibility: You can insert or remove batteries at any time during the charging process without damaging the battery or charger. The charger will automatically adjust power distribution.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the charger or subjecting it to strong impacts.
- Cable Care: Do not bend or crimp the charging cable excessively. Always pull from the plug, not the cable, when disconnecting.
8. Troubleshooting
- Charger not powering on:
- Ensure the Type-C cable is securely connected to both the charger and a working power adapter. Try a different power outlet or adapter.
- Batteries not charging:
- Check if the batteries are inserted correctly into the slots. Ensure the batteries are compatible with the charger. If the battery is severely depleted or damaged, it might not charge. Try charging a different battery to isolate the issue.
- Slow charging:
- Ensure you are using a power adapter that supports PD/QC fast charging and provides sufficient wattage (e.g., 30W or higher). Charging multiple batteries simultaneously will naturally be slower than charging a single battery.
- LED indicators not working:
- If the charger is powered and batteries are inserted, but LEDs are not responding, try re-inserting the battery or restarting the charger by unplugging and re-plugging the power cable.
9. User Tips
No specific user tips were available from customer reviews at this time. For best performance, always ensure your power adapter meets the recommended specifications for fast charging.
10. Warranty and Support
The llano 3-Channel Battery Charger comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
For warranty claims, technical support, or any questions regarding your product, please contact the retailer or the official llano customer service with your purchase details.