1. Introduction
This manual provides detailed instructions for the safe and efficient use of your Baofeng BF-T20 Six Way Charger. This multi-functional charging dock is designed to simultaneously charge up to six compatible walkie talkies, offering a convenient and space-saving solution for radio users.
2. Safety Information
- Read all instructions before using the charger.
- Do not expose the charger to rain or moisture.
- Do not operate the charger if it has been damaged in any way.
- Ensure the power adapter's voltage matches your local power supply.
- Keep the charger away from heat sources and direct sunlight.
- Do not attempt to disassemble or modify the charger.
- Unplug the charger from the power outlet when not in use or before cleaning.
- This charger is equipped with Low Heat Dissipation, Over Current Protection, and Over Temperature Protection for safe operation.
3. Product Overview
3.1 Components
- Six-Way Charging Base (Model: BL-1X6)
- Removable AC Power Adapter
- Power Switch
- Charging Status LED Indicators (Red for Charging, Green for Complete)
3.2 Features
- Simultaneous Charging: Charges up to six walkie talkies at the same time.
- Space and Time Saving: Eliminates the need for multiple individual chargers and cables.
- LED Indicators: Clear visual feedback on charging status for each slot.
- Safety Protections: Built-in safeguards against overheating and overcurrent.
- Convenient Power Control: Integrated power switch to easily turn the unit on/off.
4. Setup
- Unpack: Carefully remove the six-way charger base and the AC power adapter from its packaging.
- Connect Power Adapter: Insert the DC plug of the AC power adapter into the power input port on the back of the charging base.
- Plug into Outlet: Connect the AC plug of the power adapter to a suitable wall power outlet (100-240V ~50/60Hz).
- Positioning: Place the charger on a stable, flat surface. The charger socket can also be hung on a wall to save space.
- Power On: Flip the power switch on the side of the charger to the 'ON' position.
5. Operating Instructions
- Insert Radios: Gently place your compatible walkie talkies into the charging slots. Ensure they are seated correctly.
- Monitor Charging Status: Observe the LED indicator next to each charging slot:
- Red Light: Indicates the radio is currently charging.
- Green Light: Indicates the radio is fully charged.
- Remove Radios: Once the LED indicator turns green, the radio is fully charged and can be removed from the slot.
- Power Off: When charging is complete for all radios, or when the charger is not needed, flip the power switch to the 'OFF' position.
6. Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place when not in use.
- Inspection: Periodically inspect the power cord and charger for any signs of damage. If damage is found, discontinue use and contact support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on | Power switch is off; Power adapter not connected; No power from outlet. | Ensure power switch is ON. Check power adapter connection. Verify wall outlet has power. |
| Radio not charging (no red light) | Radio not seated correctly; Radio battery issue; Incompatible radio model. | Re-seat the radio firmly in the slot. Check radio battery condition. Confirm radio model is compatible. |
| Charging takes too long | Battery deeply discharged; Environmental factors. | Allow more time for deeply discharged batteries. Ensure charger is in a well-ventilated area. |
8. Specifications
| Feature | Detail |
|---|---|
| Base Model | BL-1X6 |
| Base Output | +4.2V --- 500mA X6 |
| Base Input | 5V --- 3000mA |
| Power Supply Input | 100-240V ~50/60Hz 0.8A |
| Power Supply Output | 5V |
| Dimensions (L x W x H) | 9.45 x 7.09 x 2.36 inches (24 x 18 x 6 cm) |
| Plug Style | US/EU/UK (Optional) |
| Safety Features | Low Heat Dissipation, Over Current Protection, Over Temperature Protection |
9. Compatible Models
The Baofeng BF-T20 Six Way Charger is compatible with the following walkie talkie models:
- Baofeng BF-T20
- WLN KD-C1
- AP-100 (Airfree)
- Zastone X6
- NKTECH NK-U1
- Zeadio ZS-B1
- Luiton LT-316
- TIDRADIO TD-M8
- Radtel RT-10
- Radioddity R1
- Retevis RT22
10. User Tips
- Organize Your Charging Station: Utilize the wall-mounting capability to keep your charging area tidy and maximize workspace.
- Verify LED Indicators: Always check the LED indicators to confirm that your radios are charging (red light) and fully charged (green light) before deployment.
- Consolidate Charging: For teams with multiple compatible radios, this six-way charger significantly reduces clutter and ensures all devices are ready for use simultaneously.
11. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase.
