EDON WSME-200

Contents

EDON WSME-200 Inverter AC DC TIG MMA PULSE Welding Machine

User Manual

Model: WSME-200 | Brand: EDON

1. Introduction

The EDON WSME-200 is a versatile inverter welding machine designed for high-quality AC/DC TIG and MMA (Manual Metal Arc) welding. Utilizing advanced Mosfet inverter technology, it offers stable welding current and is suitable for welding stainless steel, alloy steel, carbon steel, brass, other non-ferrous metals, and aluminum. This manual provides essential information for the safe and efficient operation and maintenance of your welding machine.

2. Safety Information

WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.

  • Electric Shock: Can kill. Do not touch live electrical parts. Wear dry, insulating gloves and protective clothing.
  • Fumes and Gases: Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone.
  • Arc Rays: Can injure eyes and burn skin. Wear an approved welding helmet with a proper shade filter. Wear protective clothing to protect skin.
  • Fire and Explosion: Welding sparks can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
  • Hot Parts: Can cause severe burns. Allow equipment to cool before touching.

3. Product Overview

3.1. Key Features

  • Advanced Mosfet inverter technology for high resistance to high voltage and high temperature.
  • Multiple arc starting methods, including rising arc without touching small current and pulling to rise arc or heavy current by hot start.
  • Compact design, stable welding current, and easy arc starting.
  • Capable of high-quality MMA/TIG welding.
  • AC/DC function, specifically designed for stainless steel, alloy steel, carbon steel, brass, other non-ferrous metals, and aluminum welding.
  • O.C. & O.H. Protection for long-term use.
  • Pulse function for welding thin plates efficiently without breakdown.
  • Can be equipped with a foot pedal for remote control (optional).
  • Can be equipped with a cart for frequent machine movement (optional).

3.2. Components and Accessories

The EDON WSME-200 typically includes the main welding machine unit and standard accessories. Please check your package contents against the packing list.

EDON WSME-200 Welding Machine with Accessories
Figure 1: EDON WSME-200 Welding Machine and typical accessories (e.g., TIG torch, ground clamp, electrode holder).

3.3. Control Panel Layout

Familiarize yourself with the control panel for proper operation. The WSME-200 control panel features various knobs and switches for precise welding parameter adjustments.

Close-up of EDON WSME-200 and WSME-250 control panels
Figure 2: Close-up view of the WSME-200 and WSME-250 control panels, showing various adjustment knobs and switches.
Diagram of WSME-315 control panel with numbered labels
Figure 3: Control panel diagram (WSME-315 shown, similar to WSME-200). Key elements include: 1. Output Current Display, 2. Gas Preflow, 3. Peak Current, 4. Base Current, 5. Down Slope, 6. Power On/Off, 7. 2T-4T Switch, 8. TIG-MMA Mode Selector, 9. Postflow Time, 10. Clearance Width, 11. Pulse Width, 12. Pulse Frequency, 13. Arc Force, 14. Pulse On/Off, 15. AC-DC Selector.

4. Setup Instructions

Before operating the welding machine, ensure it is properly set up according to these instructions.

  1. Power Connection: Connect the machine to a suitable power supply (220V for WSME-200) using the appropriate power cable. Ensure the power source matches the machine's requirements and is properly grounded.
  2. Gas Connection (for TIG Welding): Connect the gas hose from your inert gas cylinder (e.g., Argon) to the gas inlet on the rear of the welding machine. Ensure all connections are tight to prevent gas leaks.
  3. Ground Clamp Connection: Attach the ground clamp cable to the appropriate terminal on the welding machine (usually marked with a ground symbol or negative terminal for DC TIG/MMA). Securely attach the ground clamp to the workpiece or welding table, ensuring good electrical contact.
  4. TIG Torch Connection: Connect the TIG torch cable to the designated TIG torch connector on the front panel. Ensure the gas line and control cable from the torch are also correctly connected.
  5. Electrode/Tungsten Installation (for TIG): Insert the appropriate size tungsten electrode into the TIG torch collet. Ensure the tungsten is sharpened correctly for the type of welding (AC or DC) and material.
  6. Electrode Holder Connection (for MMA): If performing MMA welding, connect the electrode holder cable to the appropriate terminal (usually positive for most electrodes) and insert the desired welding electrode.

5. Operating Instructions

Follow these steps for safe and effective operation of your EDON WSME-200 welding machine.

5.1. Powering On/Off

  • Ensure all connections are secure.
  • Turn the main power switch (6) to the "ON" position. The display (1) should illuminate.
  • To power off, turn the main power switch (6) to the "OFF" position.

5.2. Mode Selection

  • TIG/MMA Selection: Use the TIG-MMA mode selector switch (8) to choose between TIG welding and MMA welding.
  • AC/DC Selection (for TIG): If in TIG mode, use the AC-DC selector switch (15) to choose between AC TIG (for aluminum) and DC TIG (for stainless steel, carbon steel, etc.).

5.3. Parameter Adjustment (TIG Mode)

Adjust the following parameters using the corresponding knobs:

  • Output Current (1): Set the desired welding current.
  • Gas Preflow (2): Controls the time gas flows before the arc starts, purging the area.
  • Peak Current (3): The maximum current during the pulse cycle.
  • Base Current (4): The minimum current during the pulse cycle.
  • Down Slope (5): Controls the time it takes for the current to decrease after releasing the torch trigger, preventing cratering.
  • Postflow Time (9): Controls the time gas flows after the arc stops, protecting the hot weld puddle and tungsten from oxidation.
  • Clearance Width (10) (AC TIG only): Adjusts the cleaning action for aluminum welding.
  • Pulse Width (11): Controls the duration of the peak current within a pulse cycle.
  • Pulse Frequency (12): Controls how many pulses occur per second.
  • Arc Force (13) (MMA mode): Provides a boost in current to prevent the electrode from sticking.
  • Pulse On/Off (14): Activates or deactivates the pulse function.
  • 2T-4T Switch (7): Selects between 2-stroke (press and hold for arc) and 4-stroke (press to start, press again to stop) torch operation.

5.4. Welding Process (General)

  • TIG Welding: Ensure proper gas flow. Position the torch and tungsten. Initiate the arc (HF start or lift arc). Maintain a consistent arc length and travel speed while feeding filler rod (if used).
  • MMA Welding: Insert the electrode into the holder. Strike the arc by lightly touching and quickly withdrawing the electrode from the workpiece. Maintain a consistent arc length and travel speed.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Regularly clean the machine's exterior with a dry, soft cloth. Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is disconnected from power before cleaning.
  • Cable and Connection Inspection: Periodically inspect all welding cables, torch, ground clamp, and power cord for damage, fraying, or loose connections. Replace damaged components immediately.
  • Gas System Check (TIG): For TIG welding, check gas hoses and fittings for leaks. Ensure the gas cylinder valve and regulator are functioning correctly.
  • Tungsten Electrode Maintenance (TIG): Keep tungsten electrodes clean and properly sharpened. Replace worn or contaminated tungstens.
  • Storage: Store the welding machine in a clean, dry, and well-ventilated area, away from excessive dust, moisture, and corrosive materials.

7. Troubleshooting

This section addresses common issues you might encounter. For more complex problems, contact qualified service personnel.

ProblemPossible CauseSolution
Machine does not power onNo power supply; Power switch off; Internal fuse blownCheck power outlet and circuit breaker; Turn power switch on; Contact service for fuse replacement
No arc/Weak arcPoor ground connection; Incorrect current setting; Damaged torch/electrode holder; Incorrect gas flow (TIG)Ensure good ground contact; Adjust current; Inspect/replace torch/holder; Check gas supply and flow rate
Overheat indicator onOver-duty cycle; Blocked ventilation; High ambient temperatureAllow machine to cool down; Clear ventilation openings; Operate in a cooler environment
Poor weld qualityIncorrect parameters; Contaminated workpiece/electrode; Improper technique; Insufficient gas shielding (TIG)Adjust welding parameters; Clean workpiece/electrode; Improve welding technique; Check gas flow and purity
FAQ section from product description
Figure 4: General FAQ for EDON products, highlighting quality control and OEM/ODM services.

8. Specifications

The following table details the technical specifications for the EDON WSME-200 model, alongside other models for comparison.

Table of technical parameters for WSME-200, WSME-250, WSME-315
Figure 5: Technical specifications for EDON WSME series welding machines.
ItemWSME-200
Input Voltage(V)1PH 220V±15%
Input Current(A)23.6
Output Power Capacity(KVA)5.2
Output Current Range(A)TIG: 10-180 / MMA:20-180
Preflow Time(s)0-1
Down Slope Time(s)1-10
Post Flow Time(s)1-10
No-load Voltage(V)65
Rated Duty Cycle(%)@40℃35
Efficiency(%)85
Power Factor(cosØ)0.93
AC Frequency(HZ)0.5-300
Protection ClassIP21S
Dimension(mm)525x350x390
Weight(kg)24.7

9. User Tips

  • Always ensure your workpiece is clean and free of contaminants (oil, rust, paint) for the best weld quality.
  • Practice on scrap material to fine-tune your settings before working on your main project.
  • For TIG welding, proper tungsten preparation (grinding angle) is crucial for arc stability and penetration.
  • When welding aluminum with AC TIG, adjust the AC balance (Clearance Width) to control the cleaning action and penetration.
  • Consider using a foot pedal for TIG welding to have better control over the amperage during the weld.

10. Warranty and Support

The EDON WSME-200 welding machine comes with a 1-year warranty. For technical support, service, or warranty claims, please contact your retailer or the manufacturer directly. Ensure you have your purchase receipt and product serial number available when contacting support.

For detailed product information and inquiries, you may contact the manufacturer via:

  • Email: 1741812075@qq.com
  • WhatsApp/WeChat: +86 16680548530 / +86 17343062986

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.