Coolo Ewelink ZigBee Smart Button

Contents

Ewelink ZigBee Smart Button Scene Switch User Manual

Model: Ewelink ZigBee Smart Button

Ewelink Zigbee Smart Push Button with smart home device icons

The Ewelink Zigbee Smart Push Button, compatible with various smart home platforms.

Introduction

Thank you for purchasing the Coolo Ewelink ZigBee Smart Button Scene Switch. This device allows for wireless remote control of your smart home devices through various scene linkages. Please read this manual carefully to ensure correct usage and optimal performance.

Important: An ewelink Zigbee gateway (hub) is required for this device to function. It is not compatible with Tuya gateways. This device cannot be used alone without an ewelink smart device.

Specifications

Diagram showing product dimensions and specifications table

Product dimensions and detailed technical specifications.

Attribute Value
Brand Name Coolo
Model Number Ewelink ZigBee Smart Button (ZG-101ZL/ZG-101Z)
Power Supply Battery CR2032 3V DC
Linking Method ZIGBEE 3.0
Control Distance 25m (image) / 30m (description) open area
Dimensions 50mm x 50mm (Diameter 50mm, Thickness 13mm)
Operating Temperature -10 °C ~ 55 °C
Working Humidity 0 ~ 99%RH (description) / <90%RH (image)
Battery Life 1-2 years (General use, 30000 times)
Certification CE, RoHS
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc

Package Contents

Image showing the contents of the product package

The package includes the smart button and essential accessories.

  • 1x Zigbee Smart Button
  • 1x User Manual
  • 1x Double-sided Sticker
  • 1x CR2032 Battery (pre-installed or included separately)

Setup Instructions

  1. Install Battery:
    • Open the back cover of the Smart Button.
    • Install the CR2032 battery into the battery holder, ensuring correct positive (+) and negative (-) terminal orientation.
    • If an insulation sheet is present, remove it. The indicator light should flash for 3 seconds, indicating the device is powered on.
  2. Connect to eWeLink Zigbee Gateway:
    • Ensure your eWeLink Zigbee Gateway (hub) is powered on and connected to your network.
    • Open the eWeLink App on your smartphone.
    • Navigate to the "Add Device" interface.
    • Select your Zigbee Gateway and initiate the "Search Device" function.
    • Pairing the Smart Button: Long press the button on the Smart Button for approximately 10 seconds. The indicator light will flash, signifying that the device has entered network configuration mode.
    • Wait for the eWeLink App to detect and connect to the Smart Button.
    • Once detected, follow the on-screen prompts in the app to complete the pairing process.

Video demonstrating the pairing process of the Zigbee gateway and smart button with the eWeLink app.

Diagram showing the connection of Smart Konb Scene Switch to a Zigbee Gateway, Wifi Router, and control via App or Voice

Connection diagram for the Smart Konb Scene Switch within a smart home network.

Operating Instructions

The Ewelink ZigBee Smart Button supports multiple press actions to trigger different smart scenes configured in the eWeLink App.

Illustration of single press, double press, and long press actions and their corresponding app feedback

Different press actions on the smart button trigger various smart scenes.

  • Single Press: Triggers a predefined scene. For example, a single press can power ON a Zigbee bulb.
  • Double Press: Triggers another predefined scene. For instance, a double press can activate an "away mode" to turn off all lights and appliances before leaving.
  • Long Press (>3 seconds): Triggers a third predefined scene.

You can customize these actions and their corresponding smart scenes within the eWeLink App.

Image showing a finger single-pressing the smart button to turn on a Zigbee bulb

Example of a single press action to control a Zigbee bulb.

Image showing a finger double-pressing the smart button on a wall to activate 'away mode'

Example of a double press action to activate an 'away mode' scene.

Images showing the smart button placed on a table and stuck to a wall, with eWeLink app scenes

The smart button can be placed on a table or stuck to a wall for versatile use in various scenarios.

Maintenance

  • Keep the device clean and dry.
  • Avoid exposing the device to extreme temperatures or humidity outside its specified operating range (-10 °C ~ 55 °C, 0 ~ 99%RH).
  • Replace the CR2032 battery when the device's response becomes inconsistent or the battery life indicator in the app shows low power.
  • Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or immerse the device in water.

Troubleshooting

Problem Possible Solution
Device not pairing with gateway.
  • Ensure the eWeLink Zigbee Gateway is powered on and connected to the internet.
  • Make sure the Smart Button is within range of the gateway.
  • Long press the Smart Button for 10 seconds to enter pairing mode (indicator light flashes).
  • Check if the battery is correctly installed and has sufficient charge.
  • Restart the eWeLink App and try pairing again.
Button presses not triggering scenes.
  • Verify that the Smart Button is successfully paired and online in the eWeLink App.
  • Check the battery level of the Smart Button.
  • Ensure that smart scenes are correctly configured in the eWeLink App for single, double, and long press actions.
  • Confirm that the linked smart devices are online and functional.
Indicator light not flashing.
  • Check if the CR2032 battery is installed correctly.
  • Replace the battery with a new one.
  • Ensure the insulation sheet (if any) has been removed.

User Tips

  • This smart button is known to be sturdy and reliable.
  • For advanced automation with ZHA (Zigbee Home Automation), you might need to use a specific ZHA one-button scene switch blueprint.
  • The included double-sided sticker allows for flexible placement on walls or other surfaces.

Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official Coolo website or contact your retailer. Keep your purchase receipt for warranty claims.

A detailed user manual in PDF format is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.