1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your EDON TB Series Inverter Welding Machine. Please read this manual thoroughly before using the equipment to ensure proper usage and to prevent injury or damage.
The EDON TB Series are MMA (Manual Metal Arc) welding machines featuring advanced IGBT inverter technology, designed for high efficiency and energy saving. They are portable, lightweight, and suitable for various applications including home DIY, aloft operations, field operations, and indoor-outdoor decorations.
2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.
- Wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
- Ensure adequate ventilation to avoid inhaling welding fumes.
- Work in a dry environment and avoid welding in damp or wet conditions.
- Keep flammable materials away from the welding area.
- Ensure the workpiece is properly grounded.
- Do not touch live electrical parts.
- Disconnect power before performing any maintenance or adjustments.
- Keep children and unauthorized personnel away from the welding area.
3. Product Overview & Features
The EDON TB Series Inverter Welding Machine is a compact and powerful tool for various welding tasks. Key features include:
- Advanced IGBT inverter technology for stable arc and efficient welding.
- DC output for smooth and consistent welds.
- O.C. (Overcurrent) and O.H. (Overheat) protection for enhanced durability and safety.
- Portable and lightweight design for easy transport and use in various locations.
- Energy-saving operation.
4. Setup
Before operating the welding machine, ensure all connections are secure and correct.
4.1 Unpacking and Inspection
- Carefully unpack the welding machine and all accessories.
- Inspect for any visible damage during transit. If damaged, do not operate and contact support.
- Verify all components are present: welding machine, earth clamp, electric holder, mask.
4.2 Connecting Accessories
- Connect the earth clamp cable to the negative (-) terminal on the front panel of the welding machine. Securely fasten the clamp to the workpiece or a clean, bare metal part of the welding table.
- Connect the electrode holder cable to the positive (+) terminal on the front panel of the welding machine.
- Ensure all connections are tight to prevent poor contact and overheating.
4.3 Power Connection
- The machine operates on 1PH AC 220V±15%, 50/60Hz. Ensure your power supply matches these requirements.
- Plug the power cord into a suitable grounded electrical outlet.
5. Operating Instructions
Follow these steps for basic operation of your EDON TB Series welding machine.
5.1 Powering On
- Turn on the power switch located on the rear panel of the machine.
- The digital display on the front panel will illuminate, showing the current setting.
5.2 Adjusting Welding Parameters
- Current Adjustment: Use the "CURRENT" knob on the front panel to set the desired welding current (Amperes). The range is typically 20-160A, depending on the model. Refer to the electrode manufacturer's recommendations for appropriate current settings.
- Arc Force Adjustment: Use the "ARC FORCE" knob to adjust the arc stability and penetration. Higher arc force can help prevent the electrode from sticking, especially with difficult electrodes or in certain welding positions.
5.3 Welding Process
- Insert the appropriate electrode (1.0-4.0mm diameter) into the electrode holder.
- Strike an arc by lightly touching the electrode to the workpiece and quickly lifting it slightly to establish the arc.
- Maintain a consistent arc length and travel speed for optimal weld quality.
- Monitor the O.C. and O.H. indicators. If they light up, the machine's protection systems are active. Allow the machine to cool down or check for overcurrent conditions.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your welding machine.
- Cleaning: Periodically clean the internal components of the machine using compressed air to remove dust and metal particles. Ensure the machine is unplugged before cleaning.
- Cable Inspection: Regularly inspect welding cables, electrode holder, and earth clamp for damage, fraying, or loose connections. Replace damaged parts immediately.
- Ventilation: Ensure the ventilation openings on the machine are clear and unobstructed to prevent overheating.
- Storage: Store the welding machine in a dry, clean, and well-ventilated area when not in use.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply; loose power cord; faulty power switch. | Check power outlet and cord. Ensure power switch is ON. |
| No welding output / Weak arc | Loose welding cables; poor earth clamp connection; incorrect current setting; electrode too large. | Check all cable connections. Ensure earth clamp has good contact. Adjust current. Use appropriate electrode size. |
| Overheat (O.H.) indicator on | Machine has exceeded its duty cycle; blocked ventilation. | Allow machine to cool down. Ensure ventilation openings are clear. Reduce welding time. |
| Overcurrent (O.C.) indicator on | Short circuit; excessive current setting; faulty electrode. | Check for short circuits. Reduce current setting. Replace electrode. |
If problems persist after attempting these solutions, please contact customer support.
8. Specifications
Technical specifications for the EDON TB Series Inverter Welding Machines:
| Item | TB-200 | TB-250 | TB-300 | TB-400 |
|---|---|---|---|---|
| Input Voltage (V) | 1PH AC 220V±15%, 50/60Hz | |||
| Input Current (A) | 17.6 | 21.8 | 26.2 | 31 |
| Input Capacity (KVA) | 3.8 | 4.7 | 5.8 | 6.8 |
| No-load Voltage (V) | 65±5 | 60±5 | ||
| Output Current (MMA) (A) | 20-100 | 20-120 | 20-140 | 20-160 |
| Rated Duty Cycle (%) @40°C | 60 | |||
| Efficiency (%) | 85 | |||
| Power Factor (cosØ) | 0.73 | |||
| Electrode (mm) | 1.0-2.5 | 1.0-3.2 | 1.0-4.0 | |
| Protection Class | IP21S | |||
| Insulation Class | F | |||
| Machine Size (mm) | 245x105x115 | 300x125x190 | ||
| Weight (kg) | 4.6 | |||
| Technology | IGBT | |||
9. Warranty & Support
- Warranty: The EDON TB Series Inverter Welding Machine comes with a 1-year warranty.
- After-sales Service: Engineers are available to service machinery overseas.
- After Warranty Service: Video technical support is provided for issues encountered after the warranty period.
For any support inquiries, please refer to the contact information provided by your seller or the official EDON support channels.
10. User Tips
- Always ensure a clean and solid connection for the earth clamp to prevent poor arc starting and inconsistent welds.
- Experiment with both the "CURRENT" and "ARC FORCE" knobs to find the optimal settings for different materials and electrode types.
- For prolonged welding sessions, monitor the machine's temperature and allow for cooling periods to prevent the overheat protection from activating.