KCEVE KVM HDMI Switch 4 Ports

Contents

KCEVE 4K KVM HDMI Switch 4 Ports User Manual

Model: KVM HDMI Switch 4 Ports | Brand: KCEVE

1. Introduction

This KCEVE 4K KVM HDMI Switch is a USB 3.0 version KVM switcher designed to allow four computers to share one monitor, keyboard, and mouse. It supports high resolutions up to 4K@60Hz and features four USB 3.0 ports for connecting various USB devices. The switch is plug-and-play, drive-free, and compatible with a wide range of operating systems.

KCEVE 4K KVM HDMI Switch 4 Ports with connected cables
The KCEVE 4K KVM HDMI Switch 4 Ports, showcasing its compact design and multiple ports.

2. Important Safety Warnings

Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Warning: To prevent electric shock, do not open the enclosure. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
  • Warning: Ensure all connected computers and peripherals are powered off before connecting or disconnecting cables to prevent potential damage.
  • Caution: Do not expose the device to extreme temperatures, direct sunlight, or high humidity. Keep away from water sources to avoid short circuits.

3. Package Contents

Please check the box for the following items:

Packing list for KVM HDMI Switch
Visual representation of the items included in the package.
  • 1x USB 3.0 KVM Switch
  • 4x USB 3.0 Cable (1.5m)
  • 1x HDMI 2.0 Cable (1.5m)
  • 1x Wired Remote (1.5m)
  • 1x Power Adapter
  • 1x User Manual

Note: Additional HDMI cables (beyond the one included) must be purchased separately to connect all four computers.

4. Setup Instructions

Follow these steps to set up your KVM HDMI Switch:

  1. Power Down: Ensure all connected computers and peripherals are powered off.
  2. Connect Console Peripherals: Connect your keyboard, mouse, and monitor to the dedicated Console ports on the KVM Switch.
  3. Connect KVM Cables: Connect the KVM cables from the CPU ports on the switch to the corresponding HDMI and USB 3.0 ports on each computer. Ensure both the HDMI cable (for video/audio) and the USB cable (for power/data) are connected for each computer.
  4. Power Adapter: Connect the provided USB cable to a certified 5V power adapter and plug it into the KVM switch.
  5. Power On: Power on the computers, then power on the monitor.
Detailed connection diagram for KVM HDMI Switch
Detailed connection diagram showing how to connect computers, monitor, keyboard, mouse, and other USB devices to the KVM switch.
KVM Switch input and output ports diagram
Diagram illustrating the input and output connections on the KVM switch, including PC inputs, monitor output, and USB device ports.

5. Operating Instructions

5.1 Powering On/Off

  • To turn on the device, press and hold the power button for 3 seconds.
  • To turn off the device, press and hold the power button for 3 seconds.

5.2 Switching Between Computers

You can switch between connected computers using two methods:

  • Physical Button Control: Short press the 'SELECT' button on the front panel of the KVM switch to cycle through the connected PCs (PC1, PC2, PC3, PC4).
  • Wired Remote Control: Use the included wired remote control (1.5m) to switch between computers. Press the button on the remote to change modes.
Two switching methods for KVM HDMI Switch
Illustration of the two switching methods: front panel button and wired remote control.

5.3 Setting Output Mode in Windows OS (Mirror/Extend)

The KVM switch supports both mirror and extended display modes in Windows. To change the output mode:

  1. Press the 'Window + P' keys on your keyboard.
  2. A 'Project' menu will appear on your screen.
  3. Select 'Duplicate' for mirror mode (outputs two identical screens).
  4. Select 'Extend' for extended mode (outputs two different screens, allowing for work and entertainment simultaneously).
Video demonstrating how to set the output mode (Duplicate or Extend) in Windows OS using the KVM switch.

5.4 USB 3.0 Data Transfer

The KVM switch features USB 3.0 ports, offering ultra-fast data transfer rates of up to 5Gbps, which is 10 times faster than USB 2.0.

USB 3.0 data transfer speed comparison
Visual comparison of USB 2.0 (480Mbps) and USB 3.0 (5Gbps) data transfer speeds.

6. Maintenance

  • After use, turn off the device.
  • Store the KVM switch in a dry place.
  • Keep away from children.
  • Clean the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.

7. Troubleshooting

Q: Keyboard or mouse is not working after connecting.
A: Please update the USB driver of your computer. If the issue persists, try disconnecting and reconnecting the keyboard/mouse while the KVM is powered on.
Q: No video signal or incorrect resolution.
A: Ensure you are using HDMI 2.0 cables to achieve 4K@60Hz resolution. Check all HDMI connections are secure. Verify the output mode in your operating system (Duplicate/Extend).
Q: Cannot control PS4 with mouse and keyboard.
A: Please note that if PS4 is used as an input source, the mouse and keyboard cannot control the PS4 through this KVM switch.
Q: Keyboard hotkeys are not working for switching.
A: This KVM switcher does not support keyboard hotkey control. Please use the physical button on the device or the wired remote control for switching.

8. Specifications

FeatureDetail
Model NumberKVM HDMI Switch 4 Ports
TypeUSB Adapter
Brand NameKCEVE (also associated with AIMOS)
OriginMainland China
ColorBlack
Resolution SupportUp to 4K@60Hz (3840*2160@60Hz 4:4:4), compatible with downgrade resolutions
USB Ports4x USB 3.0 (5Gbps data transfer)
EDID EmulatorYes, in each input port
Bandwidth18G
Switching MethodsPhysical button, Wired remote control
CompatibilityWindows 10 / 8.1 / 8 / 7 / XP / Vista, Mac OS, Linux, Chrome OS
Package Dimensions (approx.)Length: 27 cm, Width: 15 cm, Height: 7 cm
Package Weight (approx.)1.0 kg
4K@60Hz resolution display example
The KVM switch supports 4K@60Hz resolution for a high-quality visual experience.
Comparison of desk space with and without KVM switch
Visual comparison demonstrating how the KVM switch helps free up desk space by consolidating peripherals.

9. User Tips

  • For optimal 4K@60Hz resolution, always use high-quality HDMI 2.0 cables.
  • If your keyboard or mouse experiences connectivity issues, ensure your computer's USB drivers are up to date.
  • Remember that keyboard hotkey switching is not supported; use the physical button on the KVM or the wired remote.
  • When using a PS4 as an input source, the KVM switch will not enable mouse and keyboard control for the console.
  • The built-in EDID emulator helps maintain display settings when switching between computers, preventing window rearrangement.

10. Warranty and Support

For technical support or warranty inquiries, please contact the manufacturer:

  • Manufacturer: SHENZHEN YIJIARN DIGITAL TECHNOLOGY CO., LTD
  • Email: Seven6683@163.com

For customers in the EU, you may also contact the authorized representative:

  • AR Company Name: PROCONSEIL FR
  • Email: SophieDupont@proconseilfr.com

An additional user manual in PDF format is available for download: View User Manual (PDF)

11. Compliance Information

Applicable EU Directives:

  • Electromagnetic Compatibility (EMC): EN 55032 / EN 55035
  • Low Voltage Directive (LVD) / RoHS: EN 62368-1 / Directive 2011/65/EU

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.