JIKONG JK-BD6A24S10P

Contents

JIKONG JK-BD6A24S10P Smart Active BMS User Manual

Lithium Battery Active Balance Protection Board Maintenance Manual

1. Introduction

The JIKONG JK-BD6A24S10P Smart Active Battery Management System (BMS) is designed for large capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb meter, Bluetooth communication, and GPS remote capabilities. This BMS is compatible with various battery types, including Lithium Iron Phosphate (LiFePO4), Ternary Lithium, and Lithium Titanate (LTO) batteries.

The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, enabling a maximum continuous balance current of 0.6A. This high-current active equalization technology ensures battery consistency, extends battery range, and delays battery aging.

A mobile APP, compatible with Android and iOS operating systems, is available for this protection board. The APP connects via Bluetooth, allowing users to monitor battery status, modify working parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive functionality make it suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

JIKONG intelligent active balanced power management system (BMS) overview
Figure 1: JIKONG intelligent active balanced power management system (BMS) overview, highlighting support for 8S-24S batteries, Li-ion, LiFePO4, LTO compatibility, five major interfaces, multi-interface display, high-performance MCU, full aluminum alloy shell, continuous current 180A-200A, and instantaneous current 200A-350A.

2. Specifications

The JIKONG JK-BD6A24S10P BMS offers robust performance and a range of features for efficient battery management. Key specifications are detailed below:

ParameterValueUnit
Supply Voltage20-100V
Operating Power Consumption<800mW
Operating Temperature-30 to 70°C
Max Number of Collection Strings24Strings
Maximum Balancing Current0.6A
Maximum Charging Current100A
Maximum Discharge Current100A
Maximum Instantaneous Current200A
Maximum Internal Loop Resistance0.702mΩ
Protective Plate Size (L×W×H)162×102×20.4mm
Finished Weight360g
JIKONG Product Specifications Table
Figure 2: Detailed JIKONG Product Specifications, including technical index, balance current, continuous charge/discharge current, maximum discharge current, overcharge protection, over-discharge protection, short circuit protection, and Bluetooth function for various models (JK-BD6A20S10P, JK-BD6A24S10P, JK-B1A, JK-B2A).
Product dimensions of JIKONG JK-BD6AxxS-10P BMS
Figure 3: Product dimensions of the JIKONG JK-BD6AxxS-10P BMS, showing length 162mm, width 102mm, and thickness 20.4mm.

3. Product Features

  • LED Bluetooth Status Indicator: Provides visual feedback on Bluetooth connection status.
  • APP Bluetooth Remote Operation: Control and monitor the BMS via a mobile application.
  • Battery Capacity Calculation: Accurately estimates remaining battery capacity.
  • High Precision Voltage Acquisition (±3mV): Ensures accurate cell voltage monitoring.
  • High Precision Current Acquisition: Monitors charge and discharge currents with high accuracy.
  • Support Information Screen Display: Allows connection to an external display for real-time data.
  • Accurate Time Logging: Records operational data with precise timestamps.
  • Support RS485 & CAN Communication: Enables integration with various systems and inverters.
  • Support Alarm Function: Notifies users of critical events like over-temperature, overcharge, or over-discharge.
  • Support Heating Function: Optional feature to heat batteries in low-temperature environments.
  • Support GPS Communication: Optional feature for battery location tracking.
  • Comprehensive Protection Functions: Includes charge overcurrent, charge overvoltage, charge over-temperature, charge low-temperature, discharge overcurrent, discharge undervoltage, discharge over-temperature, and short circuit protection.
Rich interface of JIKONG Smart BMS
Figure 4: Rich interface of JIKONG Smart BMS, showing CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer, NTC, GPS, Display/Switch, and Hot ports.
Internal structure of JIKONG Smart BMS
Figure 5: Internal structure of JIKONG Smart BMS, illustrating cooling aluminum alloy, MOS components, Jikong MCU, NTC, and sampling lines for high-quality performance.
Dustproof and waterproof design of JIKONG Smart BMS
Figure 6: Dustproof and waterproof design of JIKONG Smart BMS, featuring a fully enclosed aluminum alloy shell and high-strength insulating material for protection against external environmental factors.

4. Installation and Wiring

The JIKONG JK-BD6AxxS-10P series protection board is suitable for lithium battery packs with 7-24 series cells. The specific wiring method varies depending on the number of cells in the battery pack. Always ensure all connections are secure and correct before powering on the BMS.

4.1. Packing List

Before installation, verify that all components are present:

  • BMS x 1
  • Switch x 1 (long 50cm)
  • NTC x 1 (long 40cm)
  • Sampling line B x 1 (long 70cm)
  • Sampling line A x 1 (long 70cm)
JIKONG Smart BMS Packing List
Figure 7: Packing list for the JIKONG Smart BMS, showing the main BMS unit, switch, NTC temperature sensor, and two sampling lines.

4.2. Wiring Instructions

  1. Connect all the balance cables to the BMS.
  2. Insert the main cable into the BMS.
  3. Connect the B-line (total negative battery) and the P-line (total positive battery) to the battery pack.

Important: Before starting the protection board, double-check that the balance cable is properly connected and that P- and B- are correctly connected. Ensure the protection board is securely fixed to the battery pack. Incorrect wiring can lead to abnormal operation or damage.

4.2.1. Wiring Method for 24-String Cells

Wiring diagram for 24-string cells with JIKONG Smart BMS
Figure 8: Detailed wiring diagram for a 24-string cell configuration with the JIKONG Smart BMS. This diagram illustrates connections for individual cell voltages (B1-B24), NTC temperature sensors, total negative (B-) and total positive (P-) terminals, and connections for load, inverter, and charger.

4.2.2. Wiring Method for 16-String Cells

Wiring diagram for 16-string cells with JIKONG Smart BMS
Figure 9: Detailed wiring diagram for a 16-string cell configuration with the JIKONG Smart BMS. This diagram illustrates connections for individual cell voltages (B1-B16), NTC temperature sensors, total negative (B-) and total positive (P-) terminals, and connections for load, inverter, and charger.

4.3. Interface Definition

The BMS features various interfaces for communication, sensing, and control:

JIKONG Smart BMS connector schematic diagram
Figure 10: Schematic diagram of the JIKONG JK-BD6AxxS-10P connector, detailing pin assignments for temperature sensors (NTC), GPS, display/switch, and heating ports.
CouplerInterface NamePin No.Pin NameDefinition
P1 (XH-15AW)Balance with Acquisition Interface1B-Total negative battery
2B1The first battery positive
.........
14B13The thirteenth battery positive
15B14The fourteenth battery positive
P2 (XH-11AW)Balance with Acquisition Interface (continued)1B15The fifteenth battery positive
.........
6B20The twentieth battery positive
7B21The twenty-first battery positive
8B22The twenty-second battery positive
9B23The twenty-third battery positive
10B24The twenty-fourth battery positive, Total battery positive
11B+Protection board power supply, connected to the battery
P3 (XH-4AW)Temperature Interface1T1AFirst temperature sensor pin A
2T1BFirst temperature sensor pin B
3T2ASecond temperature sensor pin A
4T2BSecond temperature sensor pin B
P4 (A1254WF-4A)Communication Interface1RS485_BRS485 signal negative terminal
2RS485_ARS485 signal positive terminal
3CAN_HCAN signal positive terminal
4CAN_LCAN signal negative terminal
P5 (1.25T-4PWT)GPS Interface1VGPSPower output, voltage close to B+
2TXUART TX, 3.3V
3RXUART RX, 3.3V
4GNDPower/signal ground
P6 (A1254WF-6A)Display Interface1VCCDisplay power output
2ADisplay RS485 signal positive
P7 (A1254WF-2A)Alarm Interface1VCCAlarm power supply positive
2GNDAlarm power negative
P8 (A1254WF-7A)Heating Interface1-5HT-Heater element negative electrode
6CD+Charge indication input positive terminal
7CD-Charge indication input negative terminal
D1Bluetooth connection indicatorSteady on when connected, blinking when disconnected.
P-External load/charger negativeConnect to external load or negative terminal of charger
B-Battery negativeConnect to the negative battery terminal

5. Operation Instructions

5.1. Active Equalization

The BMS uses active equalization to transfer energy from higher-voltage cells to lower-voltage cells. To use this function, set basic battery parameters in the JIKONG BMS APP, including cell count, battery capacity, and trigger equalization differential pressure (default 0.01V). The default balance current is 0.6A. It is recommended that the balance current not exceed 0.2C of the battery capacity. If not needed, turn off the balancing switch in the APP.

Active Balancing (Lossless Balancing) principle
Figure 11: Diagram illustrating the principle of Active Balancing (Lossless Balancing), where energy is transferred from cells with higher energy to cells with lower energy to achieve voltage balance with minimal energy loss. JIKONG BMS active balancing current ranges from 0.6A to 2A.
Excellent balance effect table
Figure 12: Table demonstrating the excellent balance effect, comparing pressure differences before and after balancing for a 16-section 100AH series battery, showing a significant reduction in voltage difference.

5.2. GPS and Display Interface

The BMS provides interfaces for optional GPS modules for battery location tracking and external display screens for convenient battery information viewing. Users can select these accessories based on their needs.

JIKONG BMS Accessories
Figure 13: JIKONG BMS Accessories, including various display options (2.5-inch, 3.2-inch, 4.3-inch touch display), switch key, RS485 module, and interface board.
Multi-screen display and data connection options
Figure 14: Multi-screen display and data connection options, showing mobile APP, PC software, and JIKONG home storage display for comprehensive battery monitoring.

5.3. Heating Function (Optional)

The optional heating function uses a resistance heater or heating film to warm the battery in low temperatures, preventing performance degradation. The designed heating current is 4A. Users can control this function via the BMS control page in the APP. It is recommended to install a temperature control switch (45°C to 65°C normally closed) in series with the heating circuit as a secondary safety measure.

5.4. Alarm Function (Optional)

The optional alarm function provides external alerts when the BMS detects safety risks such as over-temperature, overcharge, or over-discharge.

5.5. Overcharge Protection and Recovery

The BMS includes standard charge overvoltage protection. Users can set the single overcharge protection voltage and recovery voltage in the APP. If any cell voltage exceeds the set overvoltage protection value during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the recovery voltage.

5.6. Undervoltage Protection and Recovery

Standard discharge undervoltage protection is provided. Users can set the undervoltage protection voltage, recovery voltage, and automatic shutdown voltage in the APP based on their battery type. If any cell voltage falls below the set undervoltage protection value during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. If any cell voltage drops below the automatic shutdown voltage, the BMS will automatically shut down to protect the battery.

5.7. Overcurrent Protection and Recovery

5.7.1. Charge Overcurrent Protection

The BMS features standard charge overcurrent protection. Users can set the continuous charging current, overcurrent delay, and recovery time in the APP. If the charging current exceeds the set value for the specified delay, charging will stop. Charging resumes after the recovery time.

5.7.2. Discharge Overcurrent Protection

Standard discharge overcurrent protection is included. Users can set the continuous discharge current, overcurrent delay, and recovery time in the APP. If the discharge current exceeds the set value for the specified delay, discharging will stop. Discharging resumes after the recovery time. Note: The maximum continuous discharge current should not exceed 100A.

5.8. Over-temperature Protection and Recovery

Standard charge and discharge over-temperature protection is provided. Users can set the over-temperature protection and recovery values for both charging and discharging in the APP. If the temperature exceeds the set protection value, the BMS will stop the respective operation (charging or discharging). Operation resumes when the temperature drops below the recovery value.

5.9. Low Temperature Protection and Recovery

Standard charge low-temperature protection is included. Users can set the low-temperature protection and recovery values for charging in the APP. If the temperature drops below the set protection value, charging will stop. Charging resumes when the temperature rises above the recovery value. For extremely cold environments, using the optional heating function is recommended.

5.10. Short Circuit Protection and Recovery

The BMS has standard short circuit protection. Users do not need to set the trigger current but can adjust the short circuit protection delay (µs) and recovery time (S) in the APP. If a short circuit occurs during charging or discharging, the BMS will stop the operation and resume after the recovery time. Increasing the delay can help prevent false triggers from high instantaneous currents during charger or load connection.

5.11. Emergency Switch

The BMS is equipped with a standard emergency switch function. If issues like over-temperature, over-discharge, overcharge, or string drop occur, activating the emergency switch in the APP's BMS control page will enable charge and discharge for 30 minutes. This provides a temporary operational window. If a cell voltage reaches the automatic shutdown voltage during this period, the BMS will continue to operate for the full 30 minutes to prevent immediate system failure.

5.12. Intelligent Sleep

The intelligent sleep function is standard and can be enabled or disabled in the APP. Its purpose is to reduce the BMS's energy consumption by shutting down when in standby (charge/discharge current less than 1A for 26 consecutive hours). The BMS can be reactivated by pressing a button or connecting a charger.

5.13. Communication Function

The BMS supports optional CAN/RS485 communication. Users can set the address and communication protocol in the APP based on their requirements. Refer to the JIKONG Protection Board communication protocol document for specific details.

Supported CAN Protocols and host computer interface
Figure 15: Inverter communication protocol setup via mobile app and host computer. The image lists supported CAN protocols including Deye, Pylontech, Growatt, Victron Energy, INVT, SMA, and Srne.
Host computer interface for inverter communication protocol settings
Figure 16: Host computer interface for setting inverter communication protocols, allowing detailed configuration of various parameters.

5.14. APP Operation

5.14.1. APP Installation

The mobile APP for the JIKONG BMS can be downloaded by scanning the QR code provided in the manual. Android Version 7 or higher is required.

JIKONG Mobile APP link QR code
Figure 17: QR code for downloading the JIKONG Mobile APP.

5.14.2. Device Activation

Before powering on the BMS, ensure all balance cables are correctly connected and the P- and B- lines are properly wired. The BMS has no power-on control switch and is activated by connecting a charger (charger voltage 2V higher than battery voltage) after battery assembly. Alternatively, it can be activated via a connected display screen and button.

5.14.3. Parameter Setting

Detailed instructions for setting parameters are available in the "Instructions for Setting Protection Board Parameters" document.

6. Troubleshooting

This section provides guidance on common issues and their potential solutions. For more complex problems, refer to the detailed manual or contact technical support.

  • BMS Not Powering On:
    • Verify all wiring, especially P- and B- connections, are correct and secure.
    • Ensure the balance cables are properly connected.
    • Activate the BMS by connecting a charger with a voltage 2V higher than the battery pack, or use a connected display/button if available.
  • Battery Imbalance Issues:
    • Check the active equalization settings in the APP. Ensure the function is enabled and parameters like trigger differential pressure are correctly set.
    • Verify that the balance current is appropriate for your battery capacity (recommended ≤ 0.2C).
  • Over-protection Triggers (Overcharge, Over-discharge, Overcurrent, Over-temperature):
    • Review the protection parameters in the APP. Ensure they are set correctly for your battery type and application.
    • Check for external factors such as faulty charger, excessive load, or environmental temperature extremes.
    • For short circuit protection, consider increasing the delay time in the APP if false triggers occur due to high instantaneous currents.
  • Bluetooth Connection Issues:
    • Ensure the BMS is powered on and within Bluetooth range.
    • Check the LED indicator on the BMS for Bluetooth status (steady on when connected, blinking when disconnected).
    • Restart the APP and try reconnecting.
  • Heating Function Not Working (if applicable):
    • Verify the heating function is enabled in the APP.
    • Check the wiring of the heating element and any temperature control switches.
    • Ensure the ambient temperature is below the set low-temperature protection threshold for the heating to activate.

If problems persist, consult the full PDF manual or contact JIKONG technical support for assistance.

7. User Tips

Based on common user experiences, here are some tips for optimal use of your JIKONG Smart BMS:

  • Initial Setup: Always double-check all wiring connections, especially the balance leads and main power lines, before applying power. Incorrect wiring is a common cause of initial setup issues.
  • APP Customization: Take advantage of the mobile APP to fine-tune protection parameters (overcharge, over-discharge, overcurrent, temperature) to match your specific battery chemistry and application requirements.
  • Balancing Settings: For best battery longevity, ensure active balancing is enabled and the trigger differential pressure is set to a low value (e.g., 0.01V) to maintain cell consistency.
  • Temperature Management: If operating in cold climates, consider installing the optional heating function and setting appropriate low-temperature protection thresholds to prevent battery damage and performance loss.
  • Monitoring: Regularly monitor your battery's status via the mobile APP or an external display. Pay attention to cell voltages, temperatures, and current flows to detect potential issues early.
  • Firmware Updates: Check the official JIKONG resources periodically for any firmware updates that might improve performance or add new features.

8. Support and Warranty

For technical assistance, troubleshooting, or warranty inquiries, please contact JIKONG Smart BMS Store directly. Refer to your purchase documentation for specific warranty terms and conditions. Always provide your product model (JK-BD6A24S10P) and any relevant error descriptions when seeking support.

A comprehensive user manual in PDF format is available for download. This document provides detailed instructions and specifications:

User manual (PDF): View PDF Manual

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.