1. Introduction and Safety Precautions
Thank you for purchasing the Superun S1 Pro Indoor Exercise Bike. Please read this manual carefully before use to ensure proper operation and usage. Keep this manual in a safe place for future reference.
Important Safety Warnings:
- When the exercise bike is not in use, turn the resistance knob clockwise to stop the flywheel.
- Incorrect or excessive use may cause injury. For first-time users, it is recommended to start with reasonable time and resistance, gradually increasing intensity after a period of training.
General Precautions:
- This exercise bike is home fitness equipment with a maximum load capacity of 300 lbs (136 kg).
- Inspect the equipment carefully before first use and every 1-2 months thereafter. Use original parts for maintenance.
- If the equipment cannot be used normally, contact the dealer.
- Protect the equipment from corrosive cleaners or other items.
- Ensure proper installation and inspection before use. Do not perform dangerous actions.
- Adjust all adjustable parts to their maximum value before installation.
- This product is for adults. Children must use it under guardian supervision.
- Use this product under the guidance of doctors and fitness professionals for optimal effect.
- Create a reasonable training plan and strictly follow it.
- The resistance is adjustable; choose the appropriate resistance for your fitness level.
- Check all knobs and screws before each use to ensure safety.
- During exercise, keep your feet inside the pedal covers. Do not stop abruptly when the bike is spinning at high speed. To stop, gradually reduce pedaling speed, keep feet in pedal covers, then use the brake knob clockwise until the flywheel stops completely before dismounting.
- The exercise bike is suitable for one person at a time. Maintain a safe distance of 50 cm (20 inches) from others. Avoid contact between the flywheel and body parts or objects while it is spinning.
- Do not exceed the 'Stop' mark on the handlebar or seat post during adjustment.
- Place the exercise bike on a fixed and flat surface to prevent tipping over.
2. Installation Steps
Please ensure all parts are present before beginning assembly. Refer to the parts list in the specifications section.
Step 1: Install Foot Tubes
Unpack the equipment. Assemble the rear foot tube to the frame, tightening cap nuts and flat washers with a wrench. Attach the front foot tube to the frame and tighten hex socket head cap screws with a wrench.
Step 2: Install Seat Cushion
Remove the slide rail of the seat cushion and insert it into the frame as shown in the diagram. Align the seat cushion's hole with the steel bar. Adjust the angle of the seat cushion and tighten the hex nuts on both sides with an open-end wrench.
Step 3: Install Slide Rail
Turn the plum knob counterclockwise to unscrew it. Connect the wires, then insert the slide rail and adjust to the appropriate height before tightening the knob.
Step 4: Install Handlebar
Take out the handlebar, align it with the holes on the slide rail. Align the screws with the handlebar's screw holes and tighten them with a wrench to fix the handlebar.
Step 5: Install Electronic Meter / iPad Stand
Take out the electronic meter cover and the iPad stand. Align the screws with the holes and install the cap nuts, then tighten them with a wrench. It can be fixed by snapping it down. Then, take the screws and fix them with a wrench. Attach the electronic meter cover to the slide rail of the handlebar as shown in the figure, and then fix it with screws.
Step 6: Install Pedals
Identify the 'L' (left) and 'R' (right) marks on the pedals. For the 'R' pedal, align it with the threaded hole of the right crank, rotate it clockwise until tight, then lock it with the provided open-end wrench. For the 'L' pedal, align it with the threaded hole of the left crank, rotate it counterclockwise until tight, then lock it with the provided open-end wrench.
Note:
- The cranks are also marked 'L' and 'R'. Incorrect installation can damage the crank threads.
- Pedals must be securely tightened to prevent them from falling off during prolonged use.
3. Operation
Training Guidelines
Proper use of the exercise bike can improve hip and leg shape, increase blood oxygen levels, and boost mood.
Warm-up Before Exercising:
Always start with a proper warm-up. Engage in activities like jogging, squats, high knees, leg stretches, torso twists, and arm movements for 5-10 minutes until your body is slightly warmed up and sweating.
Adjusting the Bike for Optimal Use:
- Seat Height Adjustment: Sit on the seat and place your feet on the pedals with toes above the pedal axis. When the pedal is at its lowest point, your knee should be slightly bent (10-15 degrees). If your arms swing while riding, the seat may be too high; lower it.
- Seat Position Adjustment: When both pedals are at equal height, ensure your front knee does not extend beyond your toes. Avoid sitting too far back. The angle between your lower leg and foot should not exceed 90 degrees.
- Handlebar Height Adjustment: After adjusting the seat, set the handlebars slightly higher than the seat. Keep your back straight, especially if you have a larger body type or weak core muscles. Improper posture can lead to lower back injuries.
- Secure Shoelaces: Tie your shoelaces and place your feet into the foot straps, pulling them tight. These straps keep your feet in place for more effective pedaling.
Proper Cycling Posture:
Incorrect posture can negatively affect your workout and lead to injuries. Common mistakes include rounding your back, improper leg positioning, and incorrect pedaling technique.
- Correct Sitting Posture: Lean slightly forward, keep your arms straight, engage your core, and use diaphragmatic breathing. Your legs should be parallel to the bike's frame, with knees and hips moving in sync. Maintain a steady rhythm.
- Correct Pedaling Technique: Pedaling involves four consecutive movements: push down, pull back, lift up, and push forward. Start by pushing down, then pull your calf back, lift your foot, and finally push forward to complete the cycle. This smooth rhythm saves energy and increases speed.
Correct Cycling Speed:
Cadence and intensity are key principles. Start by finding a comfortable cadence, then gradually increase workout intensity. A typical cadence is 70 to 90 pedal strokes per minute. Begin with a low-speed warm-up, then maintain a moderate to high movement for at least 20 minutes, during which you may sweat slightly.
- For Weight Loss: Use an aerobic cycling method with manageable resistance. This moderate-intensity workout should last at least 30 minutes (ideally 30-40 minutes), maintaining a heart rate of 100-110 beats per minute.
- For Muscle Training: Start with light resistance and a 5-minute slow warm-up. Switch to high-speed cycling for about 5 minutes (160-170 beats per minute). Gradually slow down for 5-10 minutes until your heart rate drops to 100 beats per minute or lower. This can be done in multiple sets with 3-5 minutes of rest between sets.
Main Display Descriptions
The exercise bike features a screen for displaying workout data.

The display shows 8 types of data and allows 1-32 resistance level selection.
- Upper Display: Shows Bluetooth icon, RPM, LEVEL.
- Lower Display: Shows time icon, mileage icon, mode icon, calorie icon, KM or MI icon.
- Default Display: Scan mode after power-on. In non-exercise state, resistance is displayed. In exercise state, speed and resistance alternate. In scan mode, time, mileage, calories, and speed are displayed sequentially every 5 seconds.
- Exercise Status Indicator: A green ring indicates cycling or speed > 0, with RPM displayed. A red ring indicates the bike is unused.
- 'M' Key (Short Press): In scan mode, press once to enter fixed display mode. Continue pressing to switch between time, mileage, calorie, and speed icons. After a cycle, it returns to scan mode.
- 'M' Key (Long Press): In non-exercising state, press and hold to reset and clear all data.
- Knob: Turn to adjust the LEVEL value (1-32 levels). Clockwise increases resistance, counterclockwise decreases resistance.
Troubleshooting Resistance Adjustment:
If the resistance gear cannot be adjusted, try these solutions:
- Press and hold the 'Mode' button for 3 seconds, then release.
- Unplug the power cord and plug it back in.
If neither method works, contact customer service.
Data Display Range:
| Item | Range |
|---|---|
| TIME | 0:00-99:59 |
| DIST. | 0.00-99.99KM |
| RPM | 0-255 |
| SPEED | 0.0-99.9MPH |
| CALO. | 0.0-999.9 |
| LEVEL | 1-32 |
PitPat Application Operation Guide
The exercise bike supports connection to your phone via Bluetooth for an immersive workout experience.
Video demonstrating the Superun Indoor Exercise Bike in use, highlighting features like adjustable settings, multiple riding modes, one-step resistance adjustment, and NFC connectivity with the PitPat app for immersive workouts and tracking. The video also shows the integrated water bottle holder.

The PitPat app allows you to design personalized training programs and track your progress.
System Requirements:
iOS 13 or above; Android 6.0 or above.
Connecting the Spin Bike via Bluetooth:
- Download and install the PitPat app on your phone. A QR code for download is available on the device's console.
- Open the PitPat app and follow the instructions to log in or create an account.
- Connect to the spin bike:
- Enable Bluetooth on your phone (and location services for Android).
- Open the PitPat app and grant necessary permissions.
- On the app's home screen, tap the spin bike icon in the top right corner to access the search interface. Your phone will automatically search for nearby devices.
- Turn on the spin bike (look for a device starting with 'PitPat-S') to connect. When the bike beeps, the connection is successful, and the Bluetooth icon on the bike's panel will light up.
Note:
- Ensure your phone is connected to the internet during the pairing process.
- For detailed network configuration, refer to the APP description.
Power-saving and Sleep Mode:
If the bike is not ridden or the electronic meter is not operated for about 120-150 seconds, it will enter sleep mode. Pressing a button or receiving a speed signal will wake it up.
Exception Handling:
- No Display: Check if the power supply is properly connected.
- No Bluetooth Connection or Unstable Connection: Power off the equipment, wait 3 minutes, then power on again to retry connection.
- No Speed Signal: Check the connection between the electronic meter and the sensor, ensure the sensor is not too far from the flywheel magnet, and check for damage.
- Error Message 'E1': Indicates the upper/lower control cable is disconnected.
4. Routine Maintenance and Troubleshooting
Routine Maintenance:
- Regularly check for any damaged or loose components.
- Lubricate all moving parts and main connection points periodically.
- Before each use, ensure handlebars, saddle, and pedals are securely fastened. Tighten or replace loose/faulty parts promptly.
- Clean the exercise bike regularly with a soft cloth and mild detergent. Avoid solvents or corrosive cleaners.
- For issues related to the main body, bearings, belts, or other rotating wearing parts, contact the dealer or customer service.
- The internal brake is a wear part. If you notice shaking or abnormal resistance, remove the outer casing and check the internal brake pad. If the thickness is less than 2mm, replace it immediately.
Note:
If any issues are found, do not use the exercise bike until it is repaired.
Troubleshooting:
- Wobbling during use: Adjust the knob on the leg tube until the bike is stable.
- Squeaking noises: Check for loose bolts and ensure they are tightened properly.
5. Safe Exercise Measures
Beginner's Exercise Guide:
Preparation:
If you are over 35 years old or have health concerns, consult a doctor or fitness professional before using the bike for the first time. Seek advice on suitable cadence, intensity, and duration based on your age and health condition. If you experience chest tightness, pain, irregular heartbeat, shortness of breath, dizziness, or any discomfort during exercise, stop immediately and consult a professional.
If you use the spin bike regularly, you can select a speed for normal riding. If you are inexperienced, refer to the following guidelines:
- Levels 1-8: Leisure exercise
- Levels 9-16: Aerobic workout
- Levels 17-24: Body sculpting
- Levels 25-32: Muscle maintenance
Note:
Beginners should stick to levels 16 or lower, while advanced users can use levels 16 or higher.
Warm-Up Before Exercise:
Warm muscles are more flexible. Perform 5-10 minutes of stretching before your workout. Stretch each leg for 10 seconds or longer, repeating the stretches after your workout.
- Downward Stretch: With knees slightly bent, slowly bend forward, relaxing your back and shoulders. Reach for your toes with both hands. Hold for 10-15 seconds, then relax. Repeat 3 times.
- Hamstring Stretch: Sit on a clean mat and extend one leg straight. Bend the other leg inward, pressing it against the inner side of the extended leg. Reach for your toes with both hands. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg.
- Calf and Heel Tendon Stretch: Stand facing a wall or tree with one foot back. Keep your back leg straight and heel on the ground while leaning toward the wall or tree. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg.
- Quadriceps Stretch: Hold onto a wall or table for balance. Reach your right hand back to grab your right ankle, gently pulling it toward your buttocks until you feel a stretch in the front of your thigh. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg.
- Sartorius (Inner Thigh Muscles) Stretch: Sit with the soles of your feet together and knees pointed outward. Hold your feet with both hands and gently pull them toward your groin. Hold for 10-15 seconds, then relax. Repeat 3 times.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Superun |
| Model Number | S1 |
| Resistance Mode | Magnetic control |
| Resistance Control | Magnetic control |
| Resistance Gear Level | 1~32 |
| Highest Resistance Gear | 32 |
| Max Load | 300 lbs / 136 kg |
| Machine Weight | 42 lbs / 19 kg |
| Net Weight (from manual) | 43.09 lbs |
| Gross Weight (from manual) | 48.9 lbs |
| Product Size (L*W*H) | 40.55" * 19.29" * 44.09" (103cm * 49cm * 112cm) |
| Machine Size (L*W*H) | 90*46*10.4 cm |
| Packaging Size (L*W*H) | 34.02" * 7.28" * 28.33" |
| Flywheel Size and Weight | Diameter 35cm, weight 4KG |
| Adjust Armrest Height | 940-1040 mm |
| Seat Cushion Height Adjustment | 760-920 mm |
| With Speakers | No |
| Screen | Yes |
| Bluetooth Connection Available | Yes |
| Resistance Adjustment | Yes |
| Foldable | No |
| High-concerned Chemical | None |
| Type of Sports | Strength Training |
| Training Site | Legs |
| Origin | Mainland China |

Ergonomic design with key dimensions and 300 lbs weight capacity.
7. User Tips
- The PitPat app provides an excellent interactive experience, automatically adjusting resistance based on virtual routes. However, note that it may not connect to other fitness apps.
- The minimum resistance level can be quite challenging, even for experienced users.
- For users around 180 cm (5'11"), the bike is suitable when the seat is adjusted to its highest position. It is generally recommended for users under 175 cm (5'9").
- The rubber pedal straps may wear out over time; consider monitoring their condition.
- If any parts are missing upon delivery, contact customer service for prompt assistance.
- For optimal stability, especially during intense workouts, consider placing the bike on a mat.
8. Warranty and Support
Service Commitment:
This product is intended for domestic applications only. Any issues related to commercial use are not covered by our warranty. If you experience any problems regarding product functionality, please contact your local distributor for support.
FCC Statement:
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information:
The device has been evaluated to meet general RF exposure requirements. It can be used in 0mm exposure conditions, complying with exposure requirements. Only in the stated conditions is it shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Support Contact:
- Phone: +1 888-318-4777
- Email: sports@pitpatpower.com
A detailed user manual (PDF) is available for download from the manufacturer's website or can be accessed via the provided QR code on the device itself.