1. Introduction
The BEBONCOOL MC300 is a versatile mobile phone gamepad designed to enhance your gaming experience on both Android and iOS devices. Featuring Hall Effect joysticks for precision and durability, a stretchable design to accommodate various phone sizes, and customizable RGB lighting, this controller provides a comfortable and responsive way to play your favorite mobile and cloud-based games.
2. Safety Information
- Do not expose the controller to extreme temperatures or direct sunlight.
- Keep the device away from water or other liquids.
- Do not attempt to disassemble or modify the controller, as this will void the warranty and may cause damage.
- Use only the provided charging cable or a certified equivalent to charge the device.
- Keep out of reach of small children.
3. Package Contents
Please check the package for the following items:
- BEBONCOOL MC300 Mobile Phone Controller
- USB Charging Cable
- Instruction Manual
4. Product Overview
Familiarize yourself with the buttons and features of your BEBONCOOL MC300 controller.
The controller features standard gamepad buttons including ABXY, D-pad, joysticks, shoulder buttons (L1/R1), triggers (L2/R2), and additional function buttons like TURBO, M (Mode), T, and RGB.
5. Setup
5.1. Phone Installation
The controller features a stretchable design to securely hold mobile phones between 10cm and 17.5cm in length. The contact surfaces are equipped with full rubber pads to ensure a firm grip without scratching your device. It also supports most conventional phone cases.
- Gently pull the left and right sides of the controller outwards to extend the phone holder.
- Carefully place your mobile phone into the holder, ensuring it is centered and securely gripped by the rubber pads.
- Release the controller sides to allow them to retract and firmly hold your phone.
5.2. Bluetooth Connection
To connect your BEBONCOOL MC300 controller to your mobile device via Bluetooth:
- Ensure your phone's Bluetooth is turned on.
- On the controller, simultaneously press the B and HOME buttons. LED4 will start blinking, indicating it's in pairing mode.
- On your mobile phone, search for Bluetooth devices:
- For Android devices, look for the Bluetooth name "Wireless Controller".
- For Apple (iOS) devices, look for the Bluetooth name "DUALSHOCK 4 Wireless Controller".
- Select the appropriate Bluetooth name to pair. Once connected, LED4 will stop blinking and remain solid.
Reconnection:
After initial pairing, if your phone's Bluetooth is on, simply press the HOME button on the controller to automatically reconnect.
6. Operating Instructions
6.1. Supported Gaming Platforms
The BEBONCOOL MC300 supports a wide range of controller-compatible games and cloud gaming services, including:
- Xbox Game Pass
- PS Remote Play
- Steam Link
- GeForce Now
- MFi Apple Arcade
- Popular games like Call of Duty, Roblox, Minecraft, Fortnite.
6.2. Hall Effect Joysticks
The controller is equipped with Hall Effect joysticks, which utilize magnetic sensors instead of physical contacts. This design prevents drift, wear and tear, and eliminates dead zones, providing delicate manipulation and instant response for precise control.
6.3. Turbo Function
The Turbo function allows for rapid, repeated input of a button press. It has three adjustable speeds:
- 5 shots/second (Weak)
- 12 shots/second (Moderate)
- 20 shots/second (Strong)
To activate Turbo for a button, press the TURBO button simultaneously with the desired action button (e.g., TURBO + Up/Right/Down on the D-pad or A/B/X/Y buttons).
To clear all Turbo functions, long press the TURBO key for 5 seconds.
6.4. RGB Lighting Effects
The controller features customizable RGB lighting for the joysticks and ABXY buttons.
- ABXY Button Lighting: Press TURBO + L3 to toggle the ABXY button lights on or off.
- Rocker Aperture Lighting: Press TURBO + R3 to cycle through different lighting effects for the joystick apertures. The sequence is: Dazzle color change → Red → Green → Blue → Purple → Orange → Closed. Note that there is no memory function for this setting, so it will reset upon power off.
6.5. Vibration Feedback
The controller features dual motor vibration for immersive feedback during gameplay. The vibration intensity is not adjustable.
6.6. Non-Linear Trigger Keys
The L2 and R2 trigger keys are non-linear, providing a more nuanced and responsive input for actions like acceleration or shooting, depending on the game.
6.7. Ergonomic Grip
The controller features a laser-engraved texture grip, designed for a delicate feel and comfortable, firm hold. This anti-sweat and non-slip design helps prevent fatigue during extended gaming sessions.
7. Power Management
7.1. Battery and Charging
The BEBONCOOL MC300 is equipped with a 600mAh rechargeable Li-ion battery. A full charge provides approximately 10 hours of playing time (with light effects fully open, usage time may vary). Charging typically takes about 2 hours.
7.2. Shutting Down
The controller can be turned off in two ways:
- If connected, turn off the Bluetooth on your mobile phone. The controller will automatically shut down.
- Long press the HOME button on the controller for 5 seconds.
8. Troubleshooting
- Controller not connecting via Bluetooth: Ensure your phone's Bluetooth is enabled and the controller is in pairing mode (LED4 blinking). Verify you are selecting the correct Bluetooth name ("Wireless Controller" for Android, "DUALSHOCK 4 Wireless Controller" for iOS).
- Controller not responding: Check the battery level. If low, charge the controller. Try turning the controller off and on again, then re-attempt pairing.
- Joystick drift or dead zone: The Hall Effect joysticks are designed to prevent these issues. If you experience them, ensure no physical obstructions are affecting the joysticks. If the problem persists, try resetting the controller by long-pressing the HOME button for 5 seconds to power off, then restart.
- ABXY button colors: The ABXY buttons are illuminated. You can toggle their lights on/off by pressing TURBO + L3.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BEBONCOOL |
| Model Number | BEBONCOOL MC300 |
| Type | Gamepads |
| Interface Type | USB (for charging) |
| Compatible Platform | Android, iOS (Mobile Device) |
| D-pad Switch Type | Membrane |
| ABXY Switch Type | Membrane |
| Bumpers Switch Type | Membrane |
| Wear-resistant Joysticks | Yes (Hall Effect) |
| RGB Lighting Joysticks | Yes |
| Hall Effect | Yes |
| Joystick Sensor Module Brand/Type | K-SLIVER |
| Trigger Button Type | Non-Linear |
| Battery Capacity | 600mAh Li-ion (approx. 10H playing time, 2H charging time) |
| Phone Compatibility Length | 10cm - 17.5cm |
| Vibration | Dual Motor (Non-adjustable) |
| Certification | CE, FCC |
10. User Tips
- For an optimized gaming experience, consider downloading the Shanwan controller APP. This application often collects a large number of games and platforms that support controllers and may offer online firmware upgrades for your device.
- Experiment with the RGB lighting effects (TURBO + R3) to match your gaming setup or mood. Remember that the joystick aperture lighting does not save its last setting.
- Utilize the Turbo function for games requiring rapid button presses, adjusting the speed to suit your playstyle.
11. Warranty and Support
For warranty claims or technical support, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty-related inquiries. Detailed warranty terms and conditions may be available on the manufacturer's official website or through your point of purchase.
