1. Introduction
Thank you for purchasing the ThinkRider X2MAX Smart Bike Trainer. This manual provides essential information for the safe and effective use of your indoor cycling trainer. Please read this manual thoroughly before operation and retain it for future reference.
The ThinkRider X2MAX is a smart bike trainer with a built-in power meter, designed to offer an immersive and accurate indoor cycling experience. It features fully intelligent direct drive variable resistance, simulating various terrains and training scenarios with high precision.
2. Safety Warnings
Before using this product, please be sure to read and comply with all safety instructions:
2.1 Electrical Safety
- Use only the power adapter provided with the product or a compliant power supply.
- Do not use in humid environments unless the product specifically states a waterproof rating.
- If the power cord is damaged, do not continue to use it. Contact support for a replacement.
- Always disconnect the power before cleaning.
2.2 Usage Environment
- Operating temperature range: -10°C to 40°C (subject to model specifications).
- Avoid direct sunlight, high temperatures, and dusty environments.
- Keep the ventilation good and do not block the heat dissipation holes.
2.3 Operational Safety
- Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
- Prevent liquid from entering the product interior.
- If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact support.
2.4 Measurement Safety Level (for instrument-related features)
- Please confirm the product's corresponding measurement category (CAT I/II/III/IV) and rated voltage. Do not use it outside the specified range.
- When measuring an unknown voltage, start with the highest range.
3. Package Contents and Setup
3.1 Unpacking Inspection
After opening the package, please check that all items are complete. If you find any items missing or damaged, please contact customer service immediately.
Package Included:
- 1 x Smart bike trainer
- 1 x Quick release lever
- 1 x 8-9-10 freewheel washer
- 1 x Power cable
- 1 x Power adapter
- 1 x User manual (this document)
- 1 x Thru axle adapter (non-drive side)
- 1 x Thru axle adapter (drive side)
- 1 x Quick release adapter (drive side)
- 1 x Quick release adapter (non-drive side)
- 5 x Base screws
Note: Freewheel is not included.
Note: Pulley patterns may vary slightly due to different production batches. Products with different pulley patterns will be shipped at random.
3.2 Assembly Instructions
The following video demonstrates the unboxing and assembly process for the ThinkRider X2MAX Smart Bike Trainer. Please follow the steps carefully.
Video: ThinkRider X2MAX Unboxing and Assembly Guide. This video demonstrates how to attach the base legs, install the freewheel/cassette, and use the thru-axle adapters.
3.2.1 Attaching the Base Legs
When installing the support legs, note that one side is longer and one side is shorter. The longer side is the drive side, which is where the flywheel is located. Place the trainer onto the two support legs. Use the four screws provided in the accessory bag to secure the legs. First, hand-tighten the screws, then use the hex wrench to fully tighten them.

Image: The two base bars for the ThinkRider X2MAX trainer.

Image: Demonstrates attaching the base bars to the trainer using screws and a hex wrench.
3.2.2 Freewheel/Cassette Installation
If your bike trainer does not have a freewheel installed, you will need to install one. First, locate the widest spline on the trainer's hub. Then, find the widest step on the freewheel. Align these two widest points and push the freewheel onto the hub. Repeat this for the remaining freewheel plates, ensuring the widest step aligns with the widest spline. Finally, tighten the end cap. Use a freewheel wrench and cassette tool to tighten the freewheel. If possible, use a torque wrench set to 40Nm. If the freewheel plates wobble after tightening the end cap, it means they are not properly seated, and you must disassemble and reassemble them.
3.2.3 Thru-Axle Adapter Installation
The thru-axle adapter is installed on the drive side (the side with the freewheel). The non-drive side also has a thru-axle adapter. There are two installation methods for the non-drive side adapter; the longer one goes inside, supporting a 142mm open gear frame.
4. Basic Operations
4.1 First Use
- Please ensure the product is fully charged before use (if applicable).
- Check if the power supply voltage is consistent with the product specifications (AC100-240V, 50/60Hz, applicable worldwide).
4.2 General Controls
- Power On/Off: Press and hold the power button for 3 seconds.
- Function Selection: Short press the mode button to switch functions.
- Display Screen: The display screen shows the current value/status (e.g., power, cadence, speed).
4.3 Connectivity
The X2MAX Smart Bike Trainer features built-in BLE (Bluetooth Low Energy) and ANT+ wireless communication protocols, making it compatible with most popular indoor training applications and cycling computers.
Compatible Apps: Onelap, Zwift, Kinomap, BKOOL Cycling, Rouvy, Wahoo SystemX, FulGaz, TrainerRoad, ThinkRider, etc.
Compatible Systems: Windows, Android, Apple.
Compatible Cycling Computers: GARMIN, Bryton.
5. Maintenance and Care
5.1 Cleaning
- Wipe the outer casing with a soft, dry cloth.
- Do not use chemical solvents.
5.2 Storage
- When not in use for an extended period, clean and store the trainer in a cool, dry place.
- If applicable, remove the battery to prevent leakage if not used for an extended period.
5.3 Calibration
It is recommended to calibrate the trainer annually to ensure measurement accuracy. For calibration services, please contact a professional organization or consult our customer service.
6. Troubleshooting Common Problems
| Problem | Possible Reasons | Solution |
|---|---|---|
| Unable to power on | Power not connected/battery depleted | Check the power connection, charge, and try again. |
| No display/Display error | Poor connection/Incorrect settings | Restart the device and check the connection. |
| Inaccurate measurement values (instrument-related) | Range error/calibration required | Confirm the measurement range and contact calibration services. |
| Other faults | - | Contact customer service for technical support. |
7. Specifications
| Parameter | Value |
|---|---|
| Model NO. | X2MAX |
| Weight | approx. 16kg / 35.3lb |
| Simulated Slope | approx. 18% |
| Input Power Supply | 12V (AC100-240V, 50/60Hz) |
| Damping Type | Electromagnetic damping |
| Resistance Power | approx. 2000W |
| Structure | Steel structure |
| Drive Type | Sprocket direct drive |
| Power Error | approx. ±2% |
| Wireless Connection | Bluetooth, ANT+ |
| Noise Level | 58dB (at 1.0m & 30KPH) |
| Rim Size Compatibility | Road bikes: 24/650C/700C; Mountain bikes: 24"/26"/650B/29" |
| Quick Release Type | For Shimano HG, Shimano/SRAM 8-12s freewheels (XDR and CP freewheel hubs can be used) |
| Operating Temperature | -10℃ ~ 40°C |
| Storage Temperature | -20℃ ~ 60°C |
| Protection Level | IP20 (for indoor use, except for waterproof models) |
| Measurement Accuracy | 0.015% + 10 mA |
| Battery Included | No |
| High-concerned chemical | None |
Note: Specifications are subject to change without prior notice. Refer to the product label for specific details.
8. User Tips
- To avoid data misplacement and resistance issues, ensure the bike trainer is not connected to both a riding app and a cycling computer simultaneously.
- If your app cannot find the bike trainer, check if it's already connected to another app (indicated by a solid blue light). Disconnect previous connections or restart the trainer (blinking blue light means it's ready to connect) before attempting to connect to a new app.
- Always ensure good ventilation around the trainer to prevent overheating and do not block heat dissipation holes.
- Regularly clean the trainer with a soft, dry cloth to maintain its performance and longevity.
9. Warranty and Support
9.1 Warranty Policy
The product comes with a 12/24 month warranty from the date of purchase (subject to store announcement).
9.2 Technical Support
For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email.
Email: Miyeetool@outlook.com
Response time for email inquiries is typically within 24 hours (working days).
EU Responsible Person:
- Compliance Officer Name: Apex CE Specialists GmbH
- Address: Habichtweg 1 41468 Neuss Germany
- Phone Number: 35321-2066339
- Email: Info@apex-ce.com
10. EU Compliance Information
10.1 CE Declaration of Conformity
This product complies with the essential requirements of the following EU directives:
- Low Voltage Directive (LVD) 2014/35/EU
- Electromagnetic Compatibility Directive (EMC) 2014/30/EU
- RoHS Directive 2011/65/EU
10.2 Waste Disposal (WEEE)
The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste and must be collected and recycled separately.
11. Disclaimer
This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.