1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Geely JL4G18 CVVT 1.8L Auto Engine Assembly. This engine is a new, complete assembly designed for Geely Vision S1 SUV (1st Generation, 2017-present) vehicles. Adhering to these guidelines will help ensure optimal performance and longevity of the engine.
2. Specifications
| Attribute | Value |
|---|---|
| Item Type | Cylinder Body & Parts |
| OE NO. | JL4G18 CVVT |
| Condition | New |
| Type | Gas / Petrol Engine |
| Power | 102 |
| Displacement | 1.8 L |
| Torque | 172 Nm |
| Single Package Size | 60 x 60 x 80 cm |
| Single Gross Weight | 90.000 kg |
| Origin | Mainland China |
3. Product Overview
The Geely JL4G18 CVVT 1.8L Auto Engine Assembly is a complete, new engine unit. Below are various views of the engine assembly to aid in identification and understanding of its components.

Figure 1: Main view of the Geely JL4G18 CVVT 1.8L Auto Engine Assembly.

Figure 2: Front view of the engine assembly.

Figure 3: Rear view of the engine assembly.

Figure 4: Side view of the engine assembly, showing the flywheel side.

Figure 5: Side view of the engine assembly, showing the belt drive components.
4. Installation and Setup
Installation of an engine assembly requires specialized knowledge and tools. It is highly recommended that this procedure be performed by a certified automotive technician or a professional service center.
4.1. Pre-Installation Checks
- Compatibility: Ensure the engine model (JL4G18 CVVT) is compatible with your vehicle's make, model, and year. Verify using the vehicle's VIN code and existing engine model.
- Inspection: Before installation, visually inspect the new engine for any signs of damage during transit.
- Ancillary Components: Prepare all necessary ancillary components (e.g., starter, alternator, power steering pump, AC compressor, wiring harness, sensors) for transfer from the old engine or for new installation.
4.2. Installation Steps (General)
- Secure Mounting: Mount the engine securely to the vehicle's engine mounts, ensuring all fasteners are torqued to manufacturer specifications.
- Connect Systems: Systematically connect all essential vehicle systems to the engine:
- Fuel system (fuel lines, injectors)
- Electrical system (wiring harness, sensors, battery connections)
- Cooling system (hoses, radiator, thermostat)
- Exhaust system (manifold, catalytic converter)
- Intake system (air filter housing, throttle body)
- Lubrication system (oil filter, oil cooler if applicable)
- Fluid Fills: Fill the engine with the appropriate type and quantity of engine oil, coolant, and other necessary fluids as specified by the vehicle manufacturer.
- Initial Start-up: Follow the vehicle manufacturer's guidelines for initial engine start-up after replacement. Monitor for any leaks, unusual noises, or warning lights.
5. Operating the Engine
Once installed, the engine operates as part of your vehicle's powertrain. Always refer to your vehicle's owner's manual for specific operating instructions and recommendations.
- Break-in Period: A new engine may require a break-in period. During this time, avoid heavy loads, high RPMs, and prolonged idling. Consult your vehicle's manual or the engine manufacturer's recommendations for specific break-in procedures.
- Monitoring: Pay attention to dashboard warning lights, engine temperature, oil pressure, and any unusual sounds or vibrations during operation.
- Fuel Quality: Use the recommended fuel type and octane rating for optimal performance and engine health.
6. Maintenance
Regular maintenance is crucial for the longevity and reliable performance of your engine. Adhere to the maintenance schedule outlined in your vehicle's owner's manual.
- Oil Changes: Regularly change engine oil and oil filter using the specified type and viscosity of oil.
- Coolant Checks: Check coolant levels and condition periodically. Flush and replace coolant according to the vehicle's maintenance schedule.
- Air Filter: Inspect and replace the engine air filter as needed to ensure proper air intake and prevent contaminants from entering the engine.
- Belt Inspection: Check the condition and tension of all drive belts (e.g., serpentine belt) regularly.
- Spark Plugs: Replace spark plugs at recommended intervals.
- Fluid Leaks: Periodically inspect for any fluid leaks (oil, coolant, fuel).
7. Troubleshooting
If you experience any issues with your engine, it is best to consult a qualified automotive technician for diagnosis and repair. Attempting complex repairs without proper training and tools can lead to further damage or injury.
- Warning Lights: If any engine-related warning lights illuminate on your dashboard, consult your vehicle's owner's manual and seek professional diagnosis promptly.
- Unusual Noises: Any knocking, grinding, or persistent unusual noises from the engine should be investigated immediately by a technician.
- Performance Issues: Reduced power, rough idling, excessive smoke, or poor fuel economy can indicate underlying engine problems.
8. Quality Assurance
The manufacturer employs stringent quality control measures to ensure the reliability of each engine assembly:
- Strict quality control is maintained throughout the production process.
- Each engine undergoes individual, strict inspection.
- All manufactured products are subjected to 100% hot test run-in testing to ensure they meet factory inspection indicators.
Video: Overview of the manufacturing and quality control process for engine assemblies.
9. User Tips
- Verify Compatibility: Always confirm the correct engine model for your vehicle by checking both the engine model number and the vehicle's VIN code before purchase and installation.
- Professional Installation: Due to the complexity and critical nature of engine replacement, professional installation is strongly advised to ensure correct fitment and function.
10. Warranty and Support
This Geely JL4G18 CVVT 1.8L Auto Engine Assembly comes with a 12-month warranty from the date of purchase. For any warranty claims, technical support, or service inquiries, please contact your supplier or a certified service center. Ensure you retain your proof of purchase for warranty validation.