1. Introduction
Thank you for purchasing the KEMAX 4-Arm Mini Moving Head DJ Disco Light. This device is designed to create dynamic and vibrant lighting effects for various events such as parties, discos, and home entertainment. Please read this manual carefully before operation to ensure safe and proper use.
2. Package Contents
Please check the contents of your package upon arrival. If any items are missing or damaged, contact your retailer immediately.
- 1 x Moving Head Light unit
- 1 x Instruction Manual
- 1 x Remote Controller
- 1 x Bow Support (mounting bracket)
- 1 x Power Cable
- 2 x Screws
3. Setup
3.1 Physical Installation
The KEMAX 4-Arm Mini Moving Head DJ Disco Light can be placed on a flat surface or mounted using the included bow support and screws. Ensure the mounting surface is stable and can support the weight of the fixture.
- Surface Placement: Place the unit on a stable, level surface, ensuring adequate ventilation around the device.
- Mounting: Attach the bow support to the desired location (e.g., truss, ceiling) using appropriate hardware. Securely fasten the light fixture to the bow support using the provided screws.
3.2 Power Connection
Connect the provided power cable to the 'POWER IN' port on the back of the unit and then to a suitable AC power outlet. The device supports AC100-220V/50-60Hz.
3.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller to the 'DMX IN' port on the light fixture. If chaining multiple fixtures, connect the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.
4. Operating Instructions
4.1 Control Panel
The control panel on the unit features a digital display and four buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through settings and select operating modes.
- MENU: Press to cycle through the main menu options.
- UP/DOWN: Use to adjust values or navigate within menu options.
- ENTER: Confirm selection or save changes.
4.2 Operating Modes
The light supports several operating modes:
- DMX512 Mode: Allows professional control over all functions using a DMX controller. The unit has 16 DMX channels. Refer to the DMX channel chart (not provided in source, typically in a separate manual) for specific functions.
- Master/Slave Mode: Connect multiple units via DMX cables. Set one unit as 'Master' and others as 'Slave' for synchronized operation.
- Auto Mode: The light runs through pre-programmed patterns automatically.
- Sound-Activated Mode: The light reacts to music or sound detected by its built-in microphone.
- Remote Control Mode: Use the included remote control for convenient operation from a distance.
4.3 Remote Control
The remote control allows you to switch between modes, adjust settings, and trigger various effects without direct interaction with the unit. Point the remote directly at the light's sensor for best results.
4.4 Product Demonstration Video
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture.
- Cleaning: Periodically clean the lenses and exterior casing with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Cooling Fan: The unit features an efficient cooling fan to maintain a safe operating temperature. Ensure the fan vents are clear of obstructions to prevent overheating.
- Storage: When not in use, store the light in a dry, dust-free environment.
6. Troubleshooting
If you encounter issues with your KEMAX light, refer to the following common problems and solutions:
- No Power: Ensure the power cable is securely connected to both the unit and a working power outlet. Check the power switch.
- No Light Output: Verify the unit is powered on and not in a 'blackout' or 'standby' mode. Check selected operating mode.
- Incorrect DMX Function: If using DMX, ensure the DMX cables are correctly connected and the DMX address on the fixture matches your controller's settings. Confirm the DMX channel chart for proper control.
- Light Not Responding to Sound: Check if the unit is in Sound-Activated mode. Ensure the microphone is not obstructed and the sound source is loud enough.
- Remote Control Not Working: Check the battery in the remote control. Ensure there are no obstructions between the remote and the light's sensor.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | KM-MH13009 |
| Voltage | AC100-220V / 90-240V, 50-60Hz |
| Power Consumption | 48W |
| Light Source | 12 x 3W 3535 beads, 1 x 5W white flash |
| Emitting Color | RGBW |
| Luminous Flux | 2000-82000 |
| Strobe Rate | 20/per second |
| Control Modes | DMX512, Master/Slave, Auto, Sound-Activated, Remote Control |
| DMX Channels | 16CH |
| Installation Method | Self-contained |
| Product Weight | 1.5kg |
| Package Size | 24cm x 24cm x 16cm |
| Certification | CE, RoHS |
| Occasion | Home Entertainment |
8. Warranty & Support
This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For technical support or service inquiries, please contact your retailer or the manufacturer's customer service.
9. User Tips
- DMX Setup: When setting up DMX, ensure each fixture has a unique DMX address to avoid conflicts. If you're having trouble, double-check the DMX channel assignments in the full DMX manual (if available) or consult online resources for common DMX configurations.
- Enhance Effects: For more visible and dramatic beam effects, consider using the light in conjunction with a fog or haze machine.
- Placement: Experiment with different placement heights and angles to achieve varied and impactful lighting patterns.
