1. Introduction and Overview
The Lemorele R200 is a versatile wireless HDMI transmission system designed for various applications including camera live streaming, PC display extension, and TV connectivity. Featuring a built-in fan and an OLED display, this plug-and-play device eliminates the need for long HDMI cables, simplifying your setup and maintaining a tidy workspace. It supports high-definition video transmission at 1080P@60Hz with low latency, ensuring a smooth and clear viewing experience.
Video: Lemorele R200 Product Overview
2. Package Contents
Please verify that all items listed below are included in your package:
- Battery 4000mAh X2
- Cold Shoe X1
- Converter X2
- Power Adapter X2
- HDMI Cable X2
- USB C Cable X2

Image: Contents of the Lemorele R200 package.
3. Product Features
- High-Quality Video Transmission: Supports 1080P@60Hz video resolution.
- Extended Range: Up to 656ft (200m) transmission distance for 1 Transmitter (TX) to 1 Receiver (RX) setup.
- Ultra-Low Latency: Only 0.08s delay, ideal for real-time monitoring and live production.
- Multi-Receiver Support: One TX unit can transmit to up to four RX units. Note that increasing the number of RX units will reduce the effective transmission distance:
- 1 TX to 1 RX: 200m (656ft)
- 1 TX to 2 RXs: 60m (196ft)
- 1 TX to 3 RXs: 30m (98ft)
- 1 TX to 4 RXs: 20m (65ft)
- Flexible Power Options: Supports Sony NP-F970/750/550 series batteries (approx. 4.5 hours with 4000mAh battery), 12V DC power supply, and 5-12V USB-C power supply (minimum 2A current required).
- OLED Display: Provides real-time status information for easy monitoring.
- Efficient Cooling: Integrated built-in fan ensures stable operation and prevents overheating.
- Ergonomic Design: New landscape design with a comfortable grip and integrated cold shoe for stable and convenient installation.

Image: Lemorele R200 Transmitter and Receiver units.

Image: Illustration of the 656ft (200m) transmission range and low latency.

Image: Diagram showing varying transmission distances with multiple receivers.
4. Setup Instructions
Follow these steps to set up and pair your Lemorele R200 wireless HDMI system:
- Power On: Connect the Transmitter (TX) and Receiver (RX) units to a power source using one of the supported methods (NP-F battery, 12V DC adapter, or 5-12V USB-C cable). Ensure the power button (OFF/ON) is pressed.
- Initial HDMI Connection for Pairing: Use an HDMI cable to temporarily connect the HDMI IN port of the TX unit to the HDMI OUT port of the RX unit. This establishes the initial pairing handshake.
- Wait and Disconnect: Wait for approximately 30 seconds. Then, disconnect the HDMI cable from both the TX and RX units.
- Restart RX Unit: Restart the RX unit by cycling its power.
- Automatic Pairing: The TX and RX units should automatically pair once both devices are powered on and within range. Wait for the pairing to be completed, indicated on the OLED display.
- Connect Source and Display:
- Connect your HDMI source (e.g., camera, PC, game console) to the HDMI IN port of the TX unit.
- Connect your display device (e.g., monitor, projector, TV) to the HDMI OUT port of the RX unit.
- The TX unit also has an HDMI OUT port for local monitoring.

Image: Visual guide for pairing the TX and RX units.

Image: Diagram illustrating the ports and typical connections for the TX and RX units.
5. Operating Instructions
Once the TX and RX units are paired and connected, operation is straightforward:
- Power On/Off: Use the dedicated OFF/ON button on each unit to power them on or off.
- Monitor Status: The integrated OLED display on each unit shows important status information such as connection status, channel, and signal quality.
- Source and Display: The TX unit receives video input from your source device via its HDMI IN port and transmits it wirelessly. The RX unit receives the wireless signal and outputs it to your display device via its HDMI OUT port.
- Local Monitoring: The TX unit includes an HDMI OUT port, allowing you to connect a local monitor for direct viewing of the input signal.
6. Maintenance
To ensure the longevity and optimal performance of your Lemorele R200 system, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the units. Avoid using liquid cleaners or solvents.
- Environmental Conditions: Store and operate the devices in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- Cooling: Ensure the built-in fan vents are clear of obstructions to allow for proper airflow and prevent overheating.
- Battery Care: If using NP-F series batteries, follow the manufacturer's guidelines for charging, discharging, and storage to maximize battery life. Avoid fully draining batteries frequently.
- Cable Management: Keep HDMI and power cables organized and free from kinks or excessive bending to prevent damage.
7. Troubleshooting
If you encounter issues with your Lemorele R200 system, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No signal or poor video quality | Incorrect HDMI connection Devices not powered on Out of transmission range Obstructions between TX and RX Interference from other devices Pairing issue | Check all HDMI cables are securely connected. Ensure both TX and RX units are powered on. Reduce distance between TX and RX. Refer to multi-receiver distance guidelines. Ensure a clear line of sight between TX and RX. Move away from other 5.8GHz wireless devices or strong electromagnetic fields. Repeat the pairing process as described in Section 4. |
| Device does not power on | No power source Low battery Insufficient USB-C power | Connect to a power adapter or insert a charged NP-F battery. Charge the NP-F battery. Ensure USB-C power source provides at least 5V/2A. |
| Device overheating | Obstructed fan vents Poor ventilation | Ensure fan vents are clear. Do not block them. Operate the device in a well-ventilated area. |
| OLED display not working | Device not powered on Display malfunction | Ensure the device is powered on. If the device functions otherwise, contact support. |
8. User Tips
Here are some tips to enhance your experience with the Lemorele R200:
- Optimal Placement: For the best wireless performance, position the Transmitter (TX) and Receiver (RX) units with a clear line of sight, minimizing physical obstructions like walls or large objects.
- Stable Power: Always ensure a stable and sufficient power supply for both units, especially during critical operations like live streaming, to prevent unexpected disconnections.
- Minimize Interference: While the R200 operates on 5.8GHz, other wireless devices (e.g., Wi-Fi routers, cordless phones) operating on similar frequencies can cause interference. Try to keep the R200 away from such devices.
- Battery Monitoring: Regularly check the battery level on the OLED display if using NP-F batteries, especially during long shoots, to avoid power interruptions.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Lemorele |
| Model | R200 |
| Connector Type | Wireless |
| Origin | Mainland China |
| Certification | CE |
| Video Resolution | 1080P@60Hz |
| Transmission Frequency | 5.8Ghz |
| Transmission Range (1TX to 1RX) | 200m (656ft) |
| Latency | 0.08s |
| Multi-Receiver Support | Up to 1TX to 4RX |
| Power Input | NP-F series batteries (NP-F970/750/550), 12V DC, 5-12V USB-C (min 2A) |
| Display Type | OLED |
| Cooling System | Built-in fan |
| Package Weight | 1.35 kg |
| Package Dimensions | 25cm x 15cm x 8cm |

Image: Diagram showing the three power supply methods for the R200 units.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.