1. Introduction
Thank you for purchasing the Homcom Electric Fireplace. This appliance is designed to provide both warmth and a decorative ambiance to your living space with its realistic LED flame effect. Please read this manual thoroughly before installation, operation, or maintenance to ensure safe and efficient use of your new electric fireplace.

Figure 1: Homcom Electric Fireplace
2. Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow these basic precautions:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug the heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner.
- Do not use outdoors.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an automatic overheat protection feature. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet, wait 5-10 minutes for the unit to cool, then plug the heater back into the outlet.
- The appliance complies with LVD, EMC, ROHS, GS, and ERP standards.

Figure 2: Overheat Protection Feature
3. Product Overview
The Homcom Electric Fireplace is a decorative standing unit designed to enhance your home's comfort and aesthetic. It features a realistic LED flame effect that can be operated independently of the heating function. The unit is constructed from durable metal, plastic, and tempered glass, ensuring longevity and safety.
Key Features:
- Realistic LED flame effect.
- Two heat settings: 1000W and 2000W.
- Covers an area of approximately 15-20 m² (161-215 sq ft).
- Automatic overheat protection for safety.
- Can be used with heat, or flame effect only.
- Compact and suitable for various rooms.
4. Setup
This electric fireplace requires some mounting/assembly. Please follow these general steps:
- Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Inspect: Check all parts for any damage. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Assemble: Follow the assembly instructions provided with the product. Ensure all screws and fasteners are securely tightened.
- Placement: Place the fireplace on a firm, level surface. Ensure there is adequate clearance from walls, furniture, and other combustible materials as specified in the safety instructions. Do not place it directly under a fixed electrical socket.
- Power Connection: Ensure the power cord is not pinched or routed under the unit. Plug the fireplace into a suitable electrical outlet (220-240V/50Hz).
5. Operating Instructions
The controls for the fireplace are located on the side panel of the unit. Refer to Figure 3 for a visual guide.

Figure 3: Side Panel Controls (Note: Image indicates 750W/1500W, but product specifications state 1000W/2000W)
- Power On/Off: Use the main On/Off switch (labeled 'Encendido/Apagado' in the image) to turn the fireplace on or off.
- Flame Effect: When the unit is powered on, the LED flame effect will activate. This can be used independently without the heating function.
- Heat Settings: The fireplace offers two heat settings: 1000W and 2000W. Use the two power switches (labeled '2 Ajustes de Potencia' in the image) to select your desired heat output.
- Switch I: Activates 1000W heating.
- Switch II: Activates 2000W heating (when Switch I is also on).
- Temperature Adjustment: The fireplace may include a thermostat or temperature control dial. Adjust this to set your desired room temperature. The heater will cycle on and off to maintain this temperature.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric fireplace.
- Cleaning: Always unplug the appliance from the power outlet before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water enters the interior of the fireplace.
- Dust Removal: Periodically clean the air intake and exhaust vents with a soft brush or vacuum cleaner attachment to prevent dust buildup, which can affect performance and trigger overheat protection.
- Storage: If storing the fireplace for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging.
- No User-Serviceable Parts: This appliance contains no user-serviceable parts. Do not attempt to repair the unit yourself. Contact qualified service personnel for any repairs.
7. Troubleshooting
If you encounter issues with your electric fireplace, refer to the following common problems and solutions:
- No Power:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check your household circuit breaker or fuse box.
- Verify the main On/Off switch on the fireplace is in the 'On' position.
- No Heat, but Flame Effect Works:
- Ensure both heat switches (I and II) are engaged for the desired heat level.
- The overheat protection may have activated. Unplug the unit, wait 5-10 minutes, and plug it back in.
- Check if the thermostat setting is higher than the current room temperature.
- Flame Effect Not Working:
- Ensure the main power switch is on.
- If the flame effect uses a separate bulb, it might need replacement (consult support if unsure).
- Unit Shuts Off Unexpectedly:
- This is likely due to the overheat protection. Unplug the unit, allow it to cool, and check for any blocked vents before restarting.
If problems persist after attempting these solutions, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Reference | 820-131V90WT |
| Color | White |
| Material | Metal, Plastic, Tempered Glass |
| Total Dimensions (L x W x H) | 36.5 x 24 x 46 cm |
| Heating Area | 15-20 m² (approx. 161-215 sq ft) |
| Cable Length | 155 cm |
| Adjustable Power | 1000 W / 2000 W |
| Input Voltage | 220-240 V / 50Hz |
| Certifications | LVD, EMC, ROHS, GS, ERP |

Figure 4: Product Dimensions

Figure 5: Realistic Flame Effect and Heating Area (Note: Image indicates 161-323 ft², while specifications state 15-20 m²)
9. User Tips
Maximize your comfort and the efficiency of your electric fireplace with these tips:
- For optimal heating, ensure doors and windows in the room are closed to prevent heat loss.
- Use the lower heat setting (1000W) for smaller rooms or to maintain a comfortable temperature, and the higher setting (2000W) for larger spaces or quicker heating.
- Utilize the flame-only mode for ambiance during warmer months or when heating is not required.
- Position the fireplace in a central location within the room for even heat distribution.
10. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.