Langtu MC68

Contents

Langtu MC68 Magnetic Switch Wired Keyboard User Manual

Model: MC68

1. Introduction

The Langtu MC68 is a high-performance magnetic switch wired keyboard designed for both office productivity and competitive e-sports gaming. It features advanced magnetic switches, ultra-low latency, and a high polling rate to provide precise and rapid response. The keyboard's customizable functions allow users to tailor its performance to their specific needs, offering a superior typing and gaming experience.

Langtu MC68 Magnetic Switch Wired Keyboard with RGB lighting
Langtu MC68 Magnetic Switch Wired Keyboard
Product showcase video highlighting features and performance.

2. Setup Guide

2.1 Package Contents

  • Langtu MC68 Magnetic Switch Wired Keyboard
  • USB Data Cable
  • Key Puller
  • Spare Shafts (for certain editions)
  • User Manual (this document)

2.2 Connecting the Keyboard

  1. Unpack the keyboard and all accessories.
  2. Connect the provided USB data cable to the keyboard's USB port.
  3. Plug the other end of the USB data cable into an available USB port on your computer.
  4. The keyboard should be automatically recognized by your operating system (Windows, macOS, Android).

2.3 Driver and Software Installation

For full customization and advanced features, it is recommended to use the dedicated web driver software. This software allows for fine-tuning of key functions, trigger points, and lighting effects.

Web driver interface for keyboard customization
Web driver interface for advanced customization.

3. Operating Instructions

3.1 Key Features

  • Magnetic Switches: Offers adjustable trigger range from 0.01mm to 3.4mm, allowing for precise control and a '0 dead zone' experience.
  • Ultra-low Latency: Achieves a response delay as low as 0.125ms for immediate input recognition.
  • High Polling Rate: Features an 8000Hz polling rate, ensuring rapid communication between the keyboard and your computer.
  • High Scanning Rate: Up to 48000Hz for the Ultra Edition, providing extremely fast key detection.
  • RGB Lighting: Supports over 16 million colors with customizable ARGB lighting effects.
Close-up of a magnetic switch showing 0.01rt accuracy
Magnetic switch with 0.01rt accuracy.
Keyboard demonstrating 0.125ms ultra-low latency
Ultra-low latency of 0.125ms.

3.2 Advanced Customizable Functions

The Langtu MC68 supports several advanced functions via its web driver, enhancing control and responsiveness, especially for gaming.

  • RT (Rapid Trigger): Allows you to set the distance to loosen the key and the reset point. This enables quick, repeated key presses by simply releasing the key slightly and pressing again, ideal for rapid-fire actions.
  • DKS (Dynamic Keyway): Assigns different commands or triggers based on the pressing depth of a single key. For example, a light press could activate one function, while a deeper press activates another.
  • SOCD (Simultaneous Opposite Cardinal Directions) Priority: This function is designed for game controllers, handling simultaneous input from opposing directions (e.g., left and right, or up and down). It offers four selection modes:
    • Finally Input Priority: Recognizes the final pressed button.
    • Absolute Priority 1: Prioritizes one specific direction.
    • Absolute Priority 2: Prioritizes another specific direction.
    • Discount Mode: Both keys are recognized and responded to when pressed simultaneously.
  • MT (Macro Trigger): Enables a single button to perform two distinct functions. A quick click activates one function, while pressing and holding the button activates a second function.
  • TGL (Toggle): Achieves continuous triggering of a button or command with a single key press. The function remains active until the key is pressed again to stop the trigger.
Diagram illustrating DKS dynamic keyway and emergency stop functions
DKS dynamic keyway and emergency stop functions.
Diagrams explaining RS, MT, and TGL functions
RS, MT, and TGL function explanations.

3.3 Preset Modes

The keyboard's drive configuration offers three quick-to-use modes:

  • Office Mode: Optimized for general typing, reducing sensitivity to prevent accidental key presses.
  • Novice Mode: A balanced mode for users new to magnetic switch keyboards, making it easier to get started.
  • Player Mode: Features rapid trigger settings, suitable for advanced players, allowing for skill-intensive actions and custom parameter definitions.
Overview of keyboard features including preset modes
Overview of keyboard features and preset modes.

4. Maintenance

4.1 General Cleaning

  • Disconnect the keyboard from your computer before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
  • For dust and debris between keys, use compressed air.
  • Avoid spraying liquids directly onto the keyboard.

4.2 Keycap and Switch Care

  • The PBT keycaps are designed for durability and resistance to oil and stains.
  • If removing keycaps, use the provided key puller to avoid damage.
  • Magnetic switches are high-precision components; handle with care if replacing.

5. Troubleshooting

5.1 Common Issues and Solutions

  • Keyboard not responding: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port.
  • Intermittent disconnection or unstable use: Magnetic switches are sensitive to ambient conditions. If the keyboard light is on for a long time or if there are significant indoor air conditioning temperature changes, it may cause instability. Try turning off the keyboard light or ensuring a stable ambient temperature.
  • Keyway needs to be reset after unplugging: If you experience issues with key functionality after unplugging and re-plugging the keyboard, a reset of the keyway settings may be required via the web driver.
  • Inaccurate trigger or dead zone issues: Perform an intelligent calibration using the web driver. This is especially recommended after changing magnetic shafts or if you notice inconsistencies.
Warm reminder about magnetic switch sensitivity and calibration
Important reminders regarding magnetic switch performance.
Intelligent calibration process for the keyboard
Intelligent calibration helps optimize keyboard performance.

6. Specifications

FeatureDescription
Keyboard NameMC68 Moon Magnetic Switch Keyboard
Shaft BodyMagnetic Shaft, Magneto Shaft
Keyboard TypeMagnetic Switch Keyboard
Connection MethodWired Connection (USB)
Number of Keys68 keys
Mixed KeysAll series supports mixed axis
Positioning Board1.5mm Aluminum Alloy Positioning Plate
PCB1.6mm FR4 Double Panel
Light PositionLower Lights
StructureTop Structure
DriverWeb Driver
BacklightARGB (more than 16 million colors)
Connecting the Device1 unit
System SupportWin, Mac, iOS, Android system
Key Life100 Million
BatteryNone
Return Rate8000Hz
Rt Accuracy0.01mm / 0.02mm / 0.04mm (depending on version)
Scan Rate16000Hz / 32000Hz / 48000Hz (depending on version)
Keycap TechnologyBlack engraved ABS two-color injection molding (88keys) / White engraved PBT two-color injection molding (88keys) / Red PBT high-line keycaps / White PBT high-line keycaps
Filling Layer5 Layers (including silicone bottom pad)
WireSupport 0.04mm accuracy
Key PullerPlastic shaft puller / Double-ended key puller
Dust CoverNone
Spare ShaftNone / 2 spare shafts
Foot Support4 red silicone feet
Packing ListPE film, certificate, manual, shaft puller, color box, outer box
Product configuration table with detailed specifications
Detailed product configuration table.

7. User Tips

  • Regular Calibration: Due to the high precision of Hall components, it's a good practice to periodically perform an intelligent calibration via the web driver, especially if you notice any changes in key responsiveness or after replacing switches.
  • Environmental Awareness: Be mindful of ambient temperature fluctuations and prolonged use of keyboard backlighting, as these can potentially affect the stability of the magnetic switches. If you experience disconnections, try adjusting these factors.
  • Customization for Advantage: Experiment with the RT, DKS, SOCD, MT, and TGL functions in the web driver to find optimal settings for your specific games or typing style. These features can significantly enhance your performance and comfort.

8. Warranty and Support

For any technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.