Introduction
Thank you for choosing the DinoFire X400-AE Rechargeable Battery and Charging Station. This product is designed to provide a convenient and efficient charging solution for your Xbox controllers, ensuring extended gaming sessions without interruption. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new charging station and batteries.
Figure 1: DinoFire X400-AE Charging Station with Batteries
Package Contents
Please check the package contents upon unboxing:
- 1 x DinoFire Charging Station
- 4 x 6200mWh Rechargeable NI-MH Batteries
- 2 x USB Charging Cables
- 1 x User Manual (this document)
Setup Instructions
- Connect the Charging Station: Use one of the provided USB charging cables to connect the charging station to a compatible USB power source (e.g., Xbox console, PC, or USB wall adapter). The charging station features a USB-C port for connection.
- Insert Batteries into Controllers: Open the battery compartment of your compatible Xbox controller. Insert a DinoFire 6200mWh rechargeable battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Close the battery cover.
- Place Batteries in Charging Station: For charging, place the batteries (either standalone or within the controller, if applicable to your controller model and the station's design) into the designated slots on the charging station. Ensure they are seated firmly.
- Initial Charge: For optimal performance, it is recommended to fully charge all batteries before their first use.
Figure 2: Compatible Xbox Controllers
Operating Instructions
Charging Process
- When batteries are placed in the charging station, the individual LED indicators above each slot will illuminate.
- A Red LED indicates that the battery is currently charging.
- A Green LED indicates that the battery is fully charged.
- A Grey LED indicates standby mode or no battery detected.
- Charging time for a fully depleted battery is approximately 4-5 hours.
RGB Lighting Control
The charging station features customizable RGB lighting. Use the touch control button (indicated by a fingerprint icon) on the station to cycle through different lighting modes:
- Switch Lights: Cycles through static colors.
- Breathing Light: Colors fade in and out.
- Running Light: Colors flow across the base.
- No Light: Turns off the RGB lighting.
Figure 3: LED Indicators and Touch Control
Figure 4: RGB Lighting Modes
Maintenance
Battery Care
- The rechargeable NI-MH batteries are designed for over 2000 charge cycles, offering a long lifespan.
- Avoid completely draining the batteries regularly to prolong their overall life.
- Store batteries in a cool, dry place when not in use.
Cleaning
- Wipe the charging station and batteries with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the charging station is unplugged before cleaning.
Figure 5: Rechargeable Batteries with 2000+ Cycle Life
Troubleshooting
- Batteries not charging: Ensure the USB cable is securely connected to both the charging station and the power source. Verify that the batteries are correctly seated in their slots and that the individual LED indicators are red.
- LED indicators not working: Check the power connection. If the station is powered but LEDs are off, try pressing the touch control button to cycle through RGB modes, as the 'No Light' mode might be active.
- Short playing time: While batteries offer 20 hours of play, battery performance can degrade over many charge cycles. Ensure batteries are fully charged before use. If issues persist after many cycles, consider replacing the batteries.
- Safety Features: The charging station is equipped with an intelligent chip to ensure safe charging. This includes protection against over-charging, over-heating, over-circuit, and over-current. If any of these protections are triggered, the charging process may temporarily halt.
Figure 6: Safe Charging Protections
Specifications
| Feature | Detail |
|---|---|
| Brand Name | DinoFire |
| Model | X400-AE |
| Battery Type | NI-MH |
| Battery Capacity | 6200mWh |
| Nominal Voltage | Other (Standard for NI-MH rechargeable batteries) |
| Charging Time | Approx. 4-5 hours |
| Playing Time | Approx. 20 hours per battery |
| Compatible Models | Xbox One, Xbox One S, Xbox One X, XBOX SERIES X, Xbox Series S, Xbox 360 Elite |
| Certifications | CE, FCC |
| Charging Station Dimensions (L x W) | 19.2 cm x 10.8 cm |
| Package Weight | 0.44 kg |
Figure 7: Battery Performance Overview
Figure 8: Charging Station Dimensions
User Tips
- Rotate Batteries: If you have multiple controllers, consider rotating the use of your rechargeable batteries to ensure even wear and consistent performance across all.
- Optimal Placement: Place the charging station in a well-ventilated area to prevent overheating during charging, especially if using RGB lighting for extended periods.
- Power Source: For fastest charging, use a dedicated USB wall adapter with sufficient power output rather than a console's USB port, which may have lower power delivery.
- Controller Compatibility: While the batteries are compatible with many Xbox controllers, ensure your specific controller model's battery compartment is designed for this type of rechargeable battery pack.
Warranty and Support
For any questions, technical support, or warranty claims regarding your DinoFire X400-AE Rechargeable Battery and Charging Station, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty purposes.
