SONICAKE QAI-23

Contents

SONICAKE Sonic Cube II Dual-Channel Professional Audio Interface

Model: QAI-23

User Manual

1. Introduction

The SONICAKE Sonic Cube II is a versatile dual-channel professional audio interface designed for musicians, producers, and content creators. It features high-quality analog preamps, digital modeling for guitar amplifiers, and DSP effects, offering a comprehensive solution for recording and live streaming. This device ensures your audio is protected from hum and interference, delivering high-performance conversion at up to 24-bit/48kHz for pristine sound quality.

Equipped with +48V phantom power, the Sonic Cube II supports a wide range of microphones and instruments, making it suitable for both beginners and studio professionals. Its compact design and intuitive controls ensure ease of use, while compatibility with major DAW software like ProTools, Reaper, and Ableton provides seamless integration into your workflow.

2. Product Overview

The Sonic Cube II is a compact yet powerful audio interface. Below are its key features and controls:

  • High-Quality Analog Preamps: Delivers excellent dynamic range and distortion performance for clear audio capture.
  • Dual-Channel Inputs: One combo XLR/TRS input (MIC 1) and one 1/4" TRS input (LINE/INST 2) for microphones and instruments.
  • +48V Phantom Power: Provides power for condenser microphones on MIC 1.
  • Digital Modeling & DSP Effects: Includes powerful computer software with built-in digital modeling for guitar amps and various DSP effects.
  • One-Click Monitoring: Direct monitoring function allows real-time listening to input sound without latency.
  • USB 2.0 Type-C Connectivity: Ensures stable and high-speed data transfer.
  • Balanced Outputs: Two 1/4" TRS balanced jacks for connecting to studio monitors.
  • Headphone Output: Dedicated 1/4" headphone jack for personal monitoring.
  • "ON AIR" Feature: Streamlines live streaming by optimizing audio settings.
SONICAKE Sonic Cube II Audio Interface front view
Figure 2.1: Front view of the SONICAKE Sonic Cube II Audio Interface.
Close-up of SONICAKE Sonic Cube II front panel controls
Figure 2.2: Detailed view of the front panel controls, including MIC 1, LINE/INST 2, Gain knobs, +48V, EFX, RVB, HI-Z indicators, Output knob, and ON AIR/Monitor button.
SONICAKE Sonic Cube II showing front and rear panels with One-Click Monitoring feature
Figure 2.3: Front and rear panel layout, highlighting the 'ON AIR' monitoring feature.

3. Specifications

Feature Specification
Model Number QAI-23
Sampling Frequency 44.1kHz/48kHz
Sampling Precision 16-bit/24-bit
MIC 1 Input Combo balanced input (max input gain 50dB)
LINE/INST 2 Input 1/4" (6.35mm) TRS jack (gain range -25dB to +25dB)
Outputs 1/4" (6.35mm) TRS balanced jacks x2
Headphone Output 1/4" (6.35mm) headphone jack
USB Interface USB 2.0 Type-C connector
Power Supply 5V DC
Control Type Knob
Audio Output Effects EQ
Dimensions (D x W x H) 95.8mm x 143.5mm x 43.5mm
Weight 320g
Batteries Included No

4. Setup Guide

Follow these steps to set up your Sonic Cube II audio interface:

  1. Connect to Computer: Use the provided USB 2.0 Type-C cable to connect the Sonic Cube II to your computer. The device is bus-powered, so no external power adapter is typically needed.
  2. Install Drivers/Software: While the Sonic Cube II is often plug-and-play, it is recommended to visit the SONICAKE official website to download and install the latest drivers and any accompanying software for digital modeling and DSP effects.
  3. Connect Microphone: For microphones, use the MIC 1 combo input. If using a condenser microphone, ensure the +48V phantom power is activated by pressing the dedicated button.
  4. Connect Instrument: For guitars, basses, or other line-level instruments, use the LINE/INST 2 1/4" TRS input.
  5. Connect Monitors: Connect your studio monitors to the two 1/4" TRS balanced output jacks on the rear panel.
  6. Connect Headphones: Plug your headphones into the 1/4" headphone jack on the front panel for personal monitoring.
SONICAKE Sonic Cube II connected to a laptop and various audio cables
Figure 4.1: Example setup showing the Sonic Cube II connected to a laptop and audio equipment.

5. Operating Instructions

Once your Sonic Cube II is set up, follow these instructions for operation:

  1. Adjust Input Gain: Use the GAIN 1 knob for MIC 1 and GAIN 2 knob for LINE/INST 2 to set appropriate input levels. Ensure the signal is strong but does not clip (indicated by red lights).
  2. Activate Phantom Power (+48V): If using a condenser microphone, press the +48V button to supply power. The corresponding indicator light will illuminate.
  3. Engage Hi-Z Mode: For passive guitars or basses, activate the HI-Z switch on LINE/INST 2 to optimize impedance for direct recording.
  4. Monitor Your Sound:
    • Direct Monitoring: Press the "ON AIR / MONITOR" button to enable direct monitoring. This allows you to hear your input signal directly through headphones or monitors with zero latency. The indicator light will turn on.
    • Output Level: Use the large OUTPUT knob to control the overall volume for both your studio monitors and headphones.
  5. Using Digital Modeling & DSP Effects: Launch the SONICAKE software on your computer. This software provides access to guitar amp models and various DSP effects (EFX, RVB). Adjust these settings within the software to shape your sound.
  6. Recording with DAW: Open your preferred Digital Audio Workstation (DAW) software (e.g., ProTools, Reaper, Ableton). Select the Sonic Cube II as your audio input and output device within the DAW's preferences. Create new tracks and arm them for recording, then begin capturing your audio.
SONICAKE Sonic Cube II connected to a laptop and studio monitors, demonstrating digital modeling and DSP effects
Figure 5.1: The Sonic Cube II in use with a computer, showcasing its digital modeling and DSP effects capabilities.

6. Maintenance

To ensure the longevity and optimal performance of your Sonic Cube II, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or waxes.
  • Storage: Store the audio interface in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
  • Cable Management: Always disconnect cables by pulling the plug, not the cable itself. Avoid bending cables sharply or placing heavy objects on them.
  • Power Off: Disconnect the USB cable when the device is not in use for extended periods.

7. Troubleshooting

If you encounter issues with your Sonic Cube II, refer to the following troubleshooting tips:

  • No Sound Output:
    • Check all cable connections (USB, monitors, headphones).
    • Ensure the OUTPUT knob is turned up.
    • Verify that the Sonic Cube II is selected as the audio output device in your computer's sound settings and your DAW.
    • Check if the direct monitoring ("ON AIR") button is engaged if you expect to hear input directly.
  • No Input Signal:
    • Ensure the correct input (MIC 1 or LINE/INST 2) is selected in your DAW.
    • Check the GAIN knobs for the respective input channels.
    • For condenser microphones, confirm that +48V phantom power is activated.
    • Verify that your microphone or instrument is functioning correctly.
  • Hum or Interference:
    • Ensure all connections are secure.
    • Try using different cables, especially shielded ones.
    • Avoid placing the interface near power supplies, monitors, or other electronic devices that may cause interference.
    • Ensure proper grounding for all connected equipment.
  • Software/Driver Issues:
    • Reinstall the latest drivers from the SONICAKE website.
    • Ensure your DAW software is up-to-date and compatible with your operating system.
    • Restart your computer and the audio interface.

8. User Tips

Based on general user experiences with similar audio interfaces, here are some tips to enhance your experience:

  • Optimal Gain Staging: Always aim for a healthy input signal without clipping. Start with gain low and gradually increase it until your DAW's input meter shows a strong signal, typically peaking around -6dB to -3dB.
  • Latency Management: Utilize the direct monitoring feature to avoid latency issues during recording. If you must monitor through your DAW, ensure your buffer size is set as low as your computer can handle without crackling.
  • Experiment with Effects: Don't hesitate to explore the digital modeling and DSP effects software. These can significantly expand your sonic palette, especially for guitar and vocal processing.
  • Cable Quality: Invest in good quality, shielded cables for microphones and instruments to minimize noise and ensure signal integrity.
  • Software Updates: Regularly check the SONICAKE website for driver and software updates to ensure compatibility and access to new features or bug fixes.

9. Warranty and Support

The SONICAKE Sonic Cube II (Model: QAI-23) comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact SONICAKE customer service through their official website or the retailer where you purchased the device. Please have your proof of purchase and product model number (QAI-23) ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.