JIKONG JK-BD6A20S12P

Contents
JIKONG Logo

JIKONG JK-BD6A20S12P Smart BMS User Manual

Model: JK-BD6A20S12P

1. Introduction

The JIKONG JK-BD6A20S12P is an intelligent active balanced Battery Management System (BMS) designed for advanced battery pack management. This Smart BMS supports 8S-20S series Li-ion, LiFePo4, and LTO battery configurations, offering a 120A continuous charge/discharge current and a 0.6A active balance current. It integrates comprehensive protection features, multi-interface communication, and smart monitoring capabilities via mobile app and PC software, ensuring optimal performance, safety, and longevity for your battery system.

JIKONG Smart BMS Overview

Figure 1: JIKONG Intelligent Active Balanced Power Management System (BMS)

2. Product Overview

2.1 Key Features

  • Active Balancing (Lossless Balancing): Achieves voltage balance through energy transfer between cells, minimizing energy loss. Operates continuously when voltage differences exceed a set threshold, ensuring stable battery performance and extended lifespan.
  • Robust Construction: Features a fully enclosed aluminum alloy shell for superior heat dissipation, dustproof, waterproof, anti-voltage, and anti-vibration protection. Internal high-strength insulating material further enhances durability.
  • Comprehensive Protection: Includes overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection.
  • Smart Monitoring & Control: Supports multi-screen display via a dedicated mobile app (iOS, Android, HarmonyOS) and PC software for real-time data monitoring and parameter adjustment.
  • Rich Interface: Equipped with RS485, CAN, Bluetooth (BT), NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer interfaces to meet diverse application needs.
  • Wide Application: Suitable for power lithium batteries, energy storage systems, and various portable applications such as E-bikes, electric tricycles, forklifts, industrial drones, and RV energy storage.
Application Scenarios for JIKONG BMS

Figure 2: Diverse Application Scenarios

2.2 Components and Accessories

The standard package includes:

  • 1 x JIKONG Smart BMS Unit (JK-BD6A20S12P)
  • 1 x Switch (long 50cm)
  • 1 x NTC Temperature Sensor (long 40cm)
  • 1 x Sampling Line B (long 70cm)
  • 1 x Sampling Line A (long 70cm)
Packing List for JIKONG Smart BMS

Figure 3: Standard Packing List

Optional accessories (sold separately) may include various display units (2.5-inch, 3.2-inch, 4.3-inch touch display), RS485 modules, and interface boards for enhanced functionality.

Optional JIKONG BMS Accessories

Figure 4: Optional BMS Accessories

3. Specifications

The following table details the technical specifications for the JIKONG JK-BD6A20S12P Smart BMS:

Attribute Specification
Brand NameJIKONG
ModelJK-BD6A20S12P
TypeLIFEPO4 Battery BMS
Hardware or SmartSMART BMS
Balance FunctionActive Balanced BMS
Number of Battery Strings (Li-ion/LiFePo4/LTO)8S-20S
Balance Current0.6A
Conduction Resistance in Main Circuit0.65mΩ
Continuous Discharge Current120A
Continuous Charge Current120A
Maximum Discharge Current (MAX 2min)250A
Over Charge Protection Current (A)10-120A
Charge and Discharge PortCommon Port BMS
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
Other InterfacesRS485, CANBUS, HEAT
Dimensions (L x W x H)162mm x 102mm x 20mm (Note: Data tolerance range is ±2mm)
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Detection Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection3Pcs
Temperature ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS phone

Figure 5: Detailed Product Specifications

JIKONG BMS Dimensions

Figure 6: BMS Unit Dimensions

4. Setup and Installation

Proper installation and wiring are crucial for the safe and effective operation of your JIKONG Smart BMS. Please follow these steps carefully:

  1. Prepare Components: Ensure all cables (sampling lines, NTC, switch) are ready and correctly identified.
  2. Connect Cables to BMS: Carefully insert all necessary cables into their respective ports on the BMS unit. Refer to the interface diagram below for port identification.
  3. Connect to Battery:
    • Connect the B- line (Total negative electrode) from the BMS to the negative terminal of your battery pack.
    • Connect the P- line (Total positive electrode) from the BMS to the positive terminal of your battery pack.
  4. Connect Balance Wires: Connect the sampling lines (A and B) to the individual cells of your battery pack according to the provided wiring diagrams. Ensure each cell's voltage is correctly sampled.
  5. NTC Sensor Installation: Place the NTC temperature sensor in a location that accurately reflects the battery pack's temperature.
  6. Switch Connection: Connect the switch as per your system requirements.

4.1 BMS Interface Layout

JIKONG BMS Interface Layout

Figure 7: BMS Interface Ports (CAN/RS485, NTC, GPS, Sampling ports, Display/Switch, Hot)

4.2 Wiring Diagrams

Below are example wiring diagrams for 16-string and 24-string cell configurations. Adapt these diagrams to your specific battery pack's string count (8S-20S for this model).

Wiring Diagram for 16-String Cells

Figure 8: Wiring Method for 16-String Cells

Wiring Diagram for 24-String Cells

Figure 9: Wiring Method for 24-String Cells (Illustrative, adapt for 8S-20S)

Important: Always double-check all connections before powering on the system to prevent damage to the BMS or battery pack.

5. Operating Instructions

The JIKONG Smart BMS offers multiple ways to monitor and manage your battery system.

5.1 Mobile App (JIKONG SMART BMS)

The dedicated "JIKONG SMART BMS" mobile application is available for iOS, Android, and HarmonyOS devices. It provides a multi-screen display for real-time data connection and monitoring.

  1. Download & Install: Search for "JIKONG SMART BMS" in your device's app store and install it.
  2. Connect via Bluetooth: Enable Bluetooth on your mobile device and connect to the BMS.
  3. Monitor Data: The app displays critical information such as individual cell voltages, total voltage, current, temperature, State of Charge (SOC), and cycle count.
  4. Adjust Parameters: You can freely adjust multiple protection values (e.g., overcharge, over-discharge, overcurrent, temperature, balance settings) through the app. Refer to the app's internal parameters and guidelines before making changes.
JIKONG Smart BMS Mobile App Interface

Figure 10: Mobile App Interface for JIKONG Smart BMS

5.2 PC Software (K-BMS MONITOR)

For more detailed monitoring and configuration, the K-BMS MONITOR PC software can be used.

  1. Installation: Install the K-BMS MONITOR software on your computer.
  2. Connect: Connect the BMS to your PC via the RS485 interface (requires an RS485 adapter, sold separately).
  3. Monitor & Configure: The software provides a comprehensive interface to view real-time data, log information, and adjust various settings, including inverter communication protocols.
JIKONG BMS PC Software Interface

Figure 11: PC Software Interface for Monitoring and Settings

5.3 External Display

Optional external display units (e.g., JIKONG home storage display) can be connected to the BMS to provide a quick visual overview of key battery parameters.

JIKONG BMS External Display and Software Options

Figure 12: Mobile App, PC Software, and External Display Options

The BMS is compatible with mainstream inverter communication protocols. These can be configured via the mobile app or PC software.

JIKONG BMS Inverter Communication Protocols

Figure 13: Compatible Inverter Communication Protocols and App Selection

6. Maintenance

To ensure the long-term reliability and performance of your JIKONG Smart BMS, consider the following maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or solvents.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. While the unit is dustproof and waterproof, extreme conditions should be avoided.
  • Firmware Updates: Check for any available firmware updates from JIKONG to ensure your BMS has the latest features and bug fixes.

7. Troubleshooting

If you encounter issues with your JIKONG Smart BMS, consider the following basic troubleshooting steps:

  • No Power/No Display:
    • Check all power connections (B- and P- lines) to ensure they are securely connected to the battery.
    • Verify that the battery pack itself is charged and providing voltage.
    • If using an external display, ensure it is correctly connected and powered.
  • App Connection Issues:
    • Ensure Bluetooth is enabled on your mobile device and the BMS.
    • Restart the mobile app and try reconnecting.
    • Check if the BMS is already connected to another device.
  • Incorrect Readings:
    • Verify that all sampling lines are correctly connected to their respective cell terminals. Loose or incorrect connections can lead to inaccurate voltage readings.
    • Check NTC sensor placement and connection for accurate temperature readings.
  • Protection Triggered (Overcharge, Over-discharge, Overcurrent, Short Circuit):
    • Identify the specific protection triggered via the app or display.
    • Review your battery pack's specifications and compare them with the BMS settings. Adjust settings if necessary (refer to Section 5.1).
    • Inspect the load and charging source for any abnormalities that might cause protection events.

For persistent issues, consult the JIKONG technical support or refer to the official product documentation for more advanced diagnostics.

8. User Tips

While no specific user reviews or Q&A were provided for this manual, general tips for using a Smart BMS include:

  • Initial Setup Verification: After initial wiring, always perform a thorough check of all cell voltages via the app or display before applying any load or charge. This helps confirm correct balance wire connections.
  • Parameter Customization: Take advantage of the app's ability to customize protection parameters. Tailor these settings to match the exact specifications of your battery cells for optimal safety and performance.
  • Regular Monitoring: Periodically check the BMS data through the app or PC software, especially during the first few charge/discharge cycles, to ensure stable operation and cell balancing.
  • Firmware Updates: Keep an eye out for official firmware updates from JIKONG. These often bring improvements, new features, or bug fixes.

9. Warranty and Support

JIKONG is committed to providing high-quality products. For warranty information, technical support, or service inquiries, please refer to the official JIKONG website or contact your authorized dealer. Ensure you retain your proof of purchase for warranty claims.

JIKONG is a high-tech enterprise specializing in active balance power battery management systems, with a strong R&D team and ISO9001 certification.

JIKONG Company Building

Figure 14: JIKONG Technology Co., Ltd. Headquarters

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.