Introduction
The HiBy Yacht10 In-Ear Monitors (IEMs) are high-performance audio devices designed for an immersive listening experience. Featuring a 10mm magnesium-aluminum alloy dome dynamic driver, dual magnetic cores, and a Litz Type4 Coaxial PCOCC Balanced Earphone Cable, the Yacht10 delivers rich detail and dynamic musical performance. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Yacht10 IEMs.

What's Included
Your HiBy Yacht10 package includes the following items:

- HiBy Yacht10 IEM Earphones
- 3.5 Stereo & 4.4 Balanced 4PIN-Lock Gold-plated Adapters
- Cleaning Brush
- Storage Bag
- Litz Type4 Coaxial PCOCC Balanced Earphone Cable
- User Guide & HiBy Card
- High Transparent Silicone Eartips (3 pairs)
- Slow Rebound Memory Foam Eartips (3 pairs)
- Package Box
Setup
- Select Ear Tips: Choose the ear tips (silicone or memory foam) that provide the most comfortable and secure fit, ensuring a good seal for optimal sound quality. The wearing airtightness significantly impacts the listening effect.
- Attach Cable to Earphones: The Yacht10 features a 0.78mm/2-pin detachable cable design. Carefully align the pins on the cable with the receptacles on each earphone unit and push them firmly until they are securely connected. Ensure the left and right channels are correctly matched (usually indicated on the cable and earphone units).
- Connect Adapter to Cable: Attach the desired 4Pin-lock adapter (3.5mm single-ended or 4.4mm balanced) to the earphone cable. The screw-tightening design ensures a secure connection.
- Connect to Audio Source: Plug the adapter into your audio player, smartphone, or other compatible device. For devices without a standard audio jack (e.g., some smartphones), a separate USB-C digital output adapter (like the HC1 for Cu4, purchased separately) may be required.



Operating Instructions
- Wearing the Earphones: Insert the earphone units into your ears, ensuring a snug and comfortable fit. The ergonomic design is intended for stable wearability.
- Adjust Volume: Start with a low volume level on your audio source and gradually increase it to a comfortable listening level. Avoid excessively high volumes to prevent hearing damage.
- Enjoy Music: The Yacht10 is designed to deliver a detailed and dynamic sound. Experiment with different music genres to appreciate its full capabilities.

Maintenance
- Cleaning Ear Tips: Regularly remove and clean the ear tips with mild soap and water. Ensure they are completely dry before reattaching them to the earphones.
- Cleaning Earphone Units: Use the provided cleaning brush or a soft, dry cloth to gently wipe the earphone units. Avoid using harsh chemicals or excessive moisture.
- Cable Care: Handle the earphone cable with care. Avoid sharp bends, twists, or excessive pulling, which can damage the internal wiring.
- Storage: When not in use, store the earphones in the provided storage bag to protect them from dust, scratches, and tangles.
Troubleshooting
- No Sound or Intermittent Sound:
- Ensure the cable is securely connected to both the earphone units and the audio source.
- Check if the adapter is firmly attached to the cable.
- Verify that the audio source's volume is turned up and not muted.
- Test the earphones with a different audio source or cable to isolate the problem.
- Inspect the cable and connectors for any visible damage.
- Poor Sound Quality (e.g., lack of bass, distorted sound):
- Ensure the ear tips provide a proper seal in your ear canal. Try different sizes or types of ear tips.
- Clean any debris from the earphone nozzles.
- Check the audio source's settings (e.g., equalizer, volume normalization).
- Earphones do not connect wirelessly:
- The HiBy Yacht10 are wired earphones and do not support wireless (Bluetooth or Wi-Fi) connections directly. They require a physical connection to an audio source via the provided cable and adapters.
- To use with devices lacking a standard 3.5mm or 4.4mm jack, an appropriate wired adapter (e.g., USB-C to 3.5mm/4.4mm) is required.
Specifications

| Feature | Detail |
|---|---|
| Model | HIBY Yacht10 |
| Drivers In Each Side | 10mm high-performance low-distortion dynamic x 1 |
| Impedance | 24 Ω |
| Frequency Response | 20-40,000Hz |
| Sensitivity | 95dB at 1kHz |
| Max Input Power | 100mW |
| Cable Length | 1.25m |
| Wire Material | PCOCC (Litz Type4 Coaxial) |
| THD | <0.1%@1kHz 94dBSPL, 20-20kHz < 0.4 %@100mVrms |
| Interface Type | 0.78mm / 2-pin / Detachable |
| Housing Material | T6063 Aluminum Alloy (CNC Carved) |
| Diaphragm | Mg & Al Alloy Dome, Polymer Diaphragm |
| Magnetic Force | 1.2T (Dual Magnetic Core) |
| Coil | H. CCAW Coil |
| Acoustic Design | L.S.W. Acoustic Chamber, Fine-tuned Airflow Structure |
User Tips
- Ear Tip Selection is Key: Experiment with all the included ear tips (silicone and memory foam) to find the best fit for your ears. A good seal is crucial for both comfort and maximizing sound quality, especially bass response.
- Cable Management: The detachable cable offers flexibility. Consider using the provided storage bag to prevent tangles and damage when not in use.
- Adapter Versatility: Utilize the 4Pin-lock adapter system to switch between 3.5mm and 4.4mm connections based on your audio source. Remember that a separate USB-C digital adapter is needed for compatible devices.
Warranty & Support
For warranty information and customer support, please refer to the official HiBy website or contact the seller directly. Keep your proof of purchase for any warranty claims.
For additional questions or assistance, you may contact HiBy Music at service@hiby.com.