1. Introduction
This manual provides essential information for the proper handling, installation, and maintenance of the Midea Air Conditioner Control Board, model CE-KFR26G/BP2N1Y-AE.D01.NP-1. This Printed Circuit Board (PCB) is a critical component designed for specific Midea air conditioning units, facilitating their operational control. Please read this manual thoroughly before attempting any procedures.
2. Safety Information
Working with electronic components and air conditioning units can be hazardous. Always observe the following safety precautions:
- Disconnect Power: Always ensure the air conditioning unit is completely disconnected from its power source before attempting any installation, maintenance, or inspection of the control board.
- Qualified Personnel: Installation and servicing should only be performed by qualified and experienced technicians. Improper handling can lead to electric shock, damage to the unit, or personal injury.
- Electrostatic Discharge (ESD): Electronic components are sensitive to static electricity. Use appropriate ESD precautions (e.g., anti-static wrist strap, grounded work surface) when handling the PCB to prevent damage.
- Handle with Care: Avoid touching the components or traces on the PCB directly. Hold the board by its edges.
- Original Parts: Use only genuine replacement parts specified for your Midea air conditioner model.
3. Product Overview
The Midea Air Conditioner Control Board (Part Number: CE-KFR26G/BP2N1Y-AE.D01.NP-1, also identified as 17122000016838) is a replacement PCB for Midea home air conditioning units. It is supplied as a new, single unit.

Figure 1: Front view of the Midea Air Conditioner Control Board.

Figure 2: Angled view of the control board, highlighting key electronic components.

Figure 3: Detailed view of the PCB, showing various integrated circuits and connectors.

Figure 4: Another perspective of the control board, illustrating specific circuit areas and connection terminals.
4. Specifications
| Feature | Specification |
|---|---|
| Item Type | Air Conditioner Control Board (PCB) |
| Brand | Midea |
| Model Number | CE-KFR26G/BP2N1Y-AE.D01.NP-1 |
| Part Number | 17122000016838 |
| Application | Home Air Conditioning Units |
| Certification | CE |
| Origin | Mainland China |
| Electric | No (component, not an appliance) |
| High-concerned chemical | None |
| Length | 30 cm |
| Width | 20 cm |
| Height | 10 cm |
| Weight | 0.5 kg |
5. Setup and Installation
The Midea Air Conditioner Control Board is a replacement part for complex electronic systems. Incorrect installation can lead to severe damage to the air conditioner, fire hazards, or personal injury. Therefore, professional installation by a certified HVAC technician is strongly recommended.
Before Installation:
- Verify Compatibility: Ensure that the model number CE-KFR26G/BP2N1Y-AE.D01.NP-1 (or part number 17122000016838) precisely matches the original control board of your Midea air conditioning unit. Contact the seller or Midea support if you are unsure about compatibility.
- Power Disconnection: Absolutely ensure the air conditioner's main power supply is turned off and locked out before beginning any work.
- ESD Precautions: Wear an anti-static wrist strap and work on a grounded surface to prevent electrostatic discharge damage to the new PCB.
Installation Steps (General Guidance - Refer to Appliance Service Manual):
- Access the existing control board compartment within the air conditioning unit.
- Carefully disconnect all wiring harnesses and connectors from the old board, noting their positions and orientations (taking photos can be helpful).
- Remove the old control board from its mounting.
- Install the new CE-KFR26G/BP2N1Y-AE.D01.NP-1 control board in the same position.
- Reconnect all wiring harnesses and connectors to the new board, ensuring secure and correct connections.
- Double-check all connections before closing the compartment.
- Restore power to the air conditioning unit and test its functionality.
If you encounter any difficulties or the product does not function correctly after installation, please refer to the Troubleshooting section or contact support.
6. Operation
This control board is an internal component of your Midea air conditioning unit. It does not have direct user-operable controls. Its function is to manage the various operations of the air conditioner based on commands received from the user interface (e.g., remote control, wall thermostat) and internal sensors. Once correctly installed, the air conditioner should operate as designed by Midea.
7. Maintenance
The control board itself requires minimal direct maintenance. However, to ensure its longevity and proper function within the air conditioning unit, consider the following:
- Keep Dry: Ensure the air conditioner's internal environment remains dry and free from moisture, which can damage electronic components.
- Cleanliness: Periodically, a qualified technician may inspect the internal components of the air conditioner for dust and debris accumulation. Excessive dust can lead to overheating or short circuits on the PCB.
- Ventilation: Ensure the air conditioner unit has adequate ventilation to prevent heat buildup, which can stress electronic components.
Any cleaning or inspection of internal components should only be performed by a qualified technician with the power disconnected.
8. Troubleshooting
If your Midea air conditioner is not functioning correctly after replacing the control board, consider the following troubleshooting steps:
- Power Check: Verify that the air conditioner is receiving power and that all circuit breakers are on.
- Connections: Double-check all wiring harnesses and connectors on the control board to ensure they are securely and correctly attached. Loose or incorrect connections are a common cause of malfunction.
- Model Compatibility: Reconfirm that the installed control board model (CE-KFR26G/BP2N1Y-AE.D01.NP-1) is indeed the correct replacement for your specific Midea air conditioner model.
- Error Codes: Consult your air conditioner's user manual or service manual for any error codes displayed, as these can provide clues to the problem.
- Professional Assistance: If the issue persists, it is highly recommended to contact a qualified HVAC technician or the seller for further diagnosis and repair.
9. User Tips
- Inspect Upon Arrival: Before installation, carefully inspect the control board for any visible defects or damage that may have occurred during shipping. If defects are found, contact the seller immediately.
- Confirm Model: Always confirm the exact model number of your existing control board before purchasing a replacement to ensure compatibility.
10. Warranty and Support
This Midea Air Conditioner Control Board comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal operating conditions.
For warranty claims, technical support, or assistance with troubleshooting, please contact the seller (ALZENIT OK Store) or a certified Midea service center. When contacting support, please have your purchase details, the model number of the control board, and a description of the issue ready.