1. Introduction
The ZK-1001U is a versatile mono 100W Bluetooth amplifier board featuring the TPA3116D2 chip, designed for DIY audio projects. It includes built-in treble and bass adjustment, supports Bluetooth 5.3 with AAC decoding, and offers True Wireless Stereo (TWS) functionality for pairing two boards into a stereo system. With its integrated boost circuit, it is suitable for various applications, including battery-powered outdoor speakers. The board also supports the Wuzhi Audio APP for enhanced control and features.
2. Key Features
- Mono 100W output with TPA3116D2 amplifier chip.
- Integrated boost circuit for outdoor speaker applications.
- Treble and Bass adjustment knobs.
- Bluetooth 5.3 for low latency and AAC decoding.
- Supports TWS (True Wireless Stereo) for wireless pairing of two boards.
- Wuzhi Audio APP support for advanced control.
- Multiple audio inputs: Bluetooth, AUX, USB disk, USB sound card.
- Supports MP3, WMA, WAV, FLAC, APE lossless audio formats.
- Protection mechanisms: Input anti-reverse connection, over-temperature, over-current, short circuit.

3. Specifications
| Parameter | Value |
|---|---|
| Model Number | ZK-1001U |
| Amplifier Chip | TPA3116D2 |
| Audio Output | Mono 100W |
| Channels | 1 |
| Bluetooth Version | 5.3 |
| Bluetooth Transmission Distance | 15m |
| Audio Input | Bluetooth, AUX, USB disk, USB sound card |
| Adaptive Power Supply | DC 9-24V, ≥ 4A (Not suitable for 24V batteries when fully charged due to potential overvoltage. Cannot be connected to AC power directly.) |
| Adaptive Speaker Impedance | 3-8Ω |
| Adaptive Speaker Power | 20-100W |
| Product Size | 99mm x 75mm x 22.8mm |
| Net Weight | 82g |
| Weight with Package | 106g |



4. Package Contents
The package typically includes:
- ZK-1001U Amplifier Board
- Heat sink (with adhesive backing)
- Knob caps (for Treble, Bass, Volume)
- Necessary accessories for assembly (e.g., standoffs, screws)

5. Setup Instructions
Follow these steps to set up your ZK-1001U amplifier board:
- Install Heat Sink: Remove the backing adhesive from the provided heat sink. Carefully stick it onto the TPA3116D2 chip on the amplifier board. Ensure it is firmly attached for optimal heat dissipation.
- Attach Knob Caps: Insert the three knob caps onto the Treble, Bass, and Volume control shafts.
- Connect Power Supply: The board requires a DC 9-24V power supply with a minimum current of 4A. You can use a 12V or 24V adapter (DC female socket 5.5 * 2.1) or connect directly via the wiring terminals. Caution: When using batteries, ensure they are suitable (e.g., 7.4V, 12V, 21V). Do not use fully charged 24V batteries as this may cause overvoltage.
- Connect Speaker: Connect your mono speaker (20-100W, 3-8Ω) to the speaker output terminals on the board.
- Adjust Boost Voltage (Optional): The board has an internal boost circuit. You can select between 19V and 24V output for the TPA3116D2 chip. The default voltage is 24V. If you need 19V, locate the voltage selection switch (often labeled 'ON'/'OFF' or similar) and set it to the 'ON' position for 19V, or 'OFF' for 24V. This allows you to match the power output to different speakers.

6. Operating Instructions
6.1 Basic Operation
- Power On/Off: Long press the Volume control knob to turn the board on or off. The red work indicator light will illuminate when powered on.
- Volume Control: Rotate the Volume knob to adjust the overall sound level.
- Treble/Bass Adjustment: Use the dedicated Treble and Bass knobs to fine-tune the audio frequency response.
- Multi-Function Button (Volume Knob):
- Click: Play/Pause audio.
- Double Click: Skip to the next track.
- Triple Tap: Enter or exit TWS (True Wireless Stereo) mode.
6.2 Bluetooth Pairing
Once powered on, the amplifier board will automatically enter Bluetooth pairing mode. Search for the device (e.g., "Wuzhi Audio" or similar) on your smartphone or other Bluetooth-enabled device and connect. The blue TWS indicator light will flash during pairing.
6.3 True Wireless Stereo (TWS) Pairing
To achieve true wireless stereo sound, you need two ZK-1001U amplifier boards. Follow these steps:
- Ensure both amplifier boards are powered on and are the same model.
- Select one amplifier board (this will become the left channel) and triple-tap the Volume control knob. The blue TWS indicator on this board will flash rapidly, indicating it's searching for another board. The other board will automatically pair with it within 15 seconds. If pairing fails, try again by triple-tapping the knob.
- Upon successful pairing, the selected board (left channel) will have its blue indicator light continuously on. The other board (right channel) will have its blue indicator light flashing slowly.
- The next time you power on both boards, they will automatically connect in TWS mode. To cancel TWS mode, triple-tap the Volume knob on either board.

6.4 Wuzhi Audio APP Functions
The Wuzhi Audio APP provides additional control and customization options for your amplifier board:
- Change BT Name: Customize the Bluetooth name of your device for easy identification.
- Change BT Password: Set a password for your Bluetooth connection to prevent unauthorized access. This function can also be turned off.
- Adjust Prompt Tone Volume: Modify the volume of system prompt tones.
- ON/OFF Prompt Tone: Enable or disable system prompt tones.
- Sleep Music: Access a selection of natural sounds for relaxation and sleep aid, with a timed shutdown function.
- Firmware Upgrade: Update the board's firmware for improved performance and new features.


7. Troubleshooting
- No Power: Ensure the DC power supply is within the 9-24V range and provides at least 4A. Check all power connections for proper contact. Verify the power switch is in the ON position.
- No Sound: Check speaker connections and ensure the speaker impedance is 3-8Ω and power rating is 20-100W. Verify the audio source is playing and volume is turned up on both the source and the amplifier board.
- Bluetooth Not Connecting: Ensure the amplifier board is in pairing mode (blue TWS indicator flashing). Turn off and on Bluetooth on your source device. Try forgetting the device and re-pairing. Ensure no other devices are connected to the amplifier.
- TWS Pairing Issues: Ensure both boards are the same model and powered on. Triple-tap the volume knob on one board to initiate pairing. If unsuccessful, try again within 15 seconds or restart both boards.
- Overvoltage Protection: If using batteries, ensure the voltage does not exceed 24V when fully charged, especially for 24V battery packs, as this can trigger overvoltage protection.
8. Maintenance
- Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the board to moisture, extreme temperatures, or direct sunlight.
- Ensure adequate ventilation around the heat sink to prevent overheating.
- Do not attempt to disassemble or modify the board beyond the specified setup instructions, as this may void any potential warranty and cause damage.
9. Warranty and Support
For any technical issues, support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.