SCULPFUN S1

Contents

SCULPFUN S1 5.5W Laser Engraver User Manual

Model: S1 | Brand: SCULPFUN

1. Introduction

The SCULPFUN S1 is a high-performance 5.5W diode laser engraver featuring advanced laser beam shaping technology. Designed for precision and ease of use, it offers an ultra-fine 0.06mm laser focus, enabling superior cutting and engraving capabilities on a variety of materials. This manual provides essential information for the safe and effective operation of your SCULPFUN S1 laser engraver.

SCULPFUN S1 5.5W Laser Engraver
Figure 1: Overview of the SCULPFUN S1 5.5W Laser Engraver, showing its blue frame, laser module, and control box.

2. Safety Precautions

WARNING: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines.

  • Always refer to the detailed machine instructions and parameter settings provided in the full manual.
  • Ensure the laser protective cover is installed when operating the laser engraving machine.
  • Wear laser protective goggles if the protective cover is not properly installed or if additional eye protection is desired.
  • Never touch the laser with your hands during operation, as this may result in severe burns.
  • Avoid strong impacts or dropping the machine.
  • This product is not intended for use by children under 14 years of age. Adult supervision is required for users over 14 years of age.
  • Do not direct the laser beam onto any specular (reflective) objects, as this can cause the laser to reflect unpredictably, leading to injury or damage to the laser module.
  • Operate the engraver in a well-ventilated area to dissipate fumes and particles generated during engraving and cutting.
  • Keep a fire extinguisher nearby and never leave the machine unattended during operation.

3. Package Contents

Verify that all items listed below are included in your package:

  • 1 x X-axis component
  • 2 x X profiles
  • 2 x Y profiles
  • 1 x Control box component
  • 3 x Supporting legs
  • 1 x Laser component
  • 1 x 12V 5A Power adapter
  • 1 x Power cord
  • 1 x USB cable
  • 1 x Step 1-5 screw mounting kit (various screws and fasteners)
  • 2 x Belts
  • 1 x T-type M5 Hexagon socket screwdriver
  • 1 x L-type M4 Hexagon socket screwdriver
  • 1 x L-type M3 Hexagon socket screwdriver
  • 1 x 8-10mm screw wrench
  • 10 x Ribbons (cable ties)
  • 1 x Brush
  • 1 x Laser protective goggles
  • 1 x 3mm thick 10x10cm wood chip (for testing)
  • 1 x 10mm thick 10x10cm wood chip (for testing)
  • 1 x A4 size steel tabletop protective pad

4. Setup and Assembly

The SCULPFUN S1 features a robust all-metal structure designed for quick and straightforward assembly, typically completed within 10-20 minutes. The structural frame is durable and allows for future upgrades or laser module replacements.

4.1 Assembly Steps

  1. Unpack all components and verify against the package contents list.
  2. Assemble the X and Y profiles to form the main frame of the engraver. Refer to the included detailed manual for specific screw and component placement.
  3. Attach the supporting legs to the frame.
  4. Install the control box component.
  5. Mount the laser component onto the X-axis.
  6. Connect the belts as instructed in the detailed manual to ensure smooth movement of the laser module.
  7. Secure all connections using the provided screwdrivers and wrench.
  8. Place the A4 size steel tabletop protective pad on your work surface to protect it from laser damage and isolate fire hazards.

4.2 Initial Connections

  • Connect the USB cable from the control box to your computer.
  • Connect the power adapter to the control box and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
  • Ensure the power switch on the machine is in the OFF position before connecting power.

5. Operation Guide

5.1 Focusing the Laser

The S1 features a fast fixed-focus design. To focus:

  1. Place your material on the work surface.
  2. Slide the laser module up or down along its track until the laser's focal point is correctly set for your material.
  3. Tighten the screws to secure the laser module in place. This simple sliding mechanism makes focusing very quick and easy.

5.2 Software and Compatibility

The SCULPFUN S1 is compatible with various mature engraving software:

  • Supported Software: LaserGRBL, LightBurn, Benbox, GrblController, LiteFire.
  • Operating Systems: Supports Windows systems. LightBurn also supports MAC systems.
  • Engraving Modes: Supports PWM mode engraving.
  • File Formats: Compatible with JPG, PNG, DXF, SVG, G-code, NC, BMP, and other image formats.

5.3 Eye Protection Design

The laser module is equipped with a purple filter cover that filters 98% of ultraviolet light. This design allows you and those around you to observe the laser engraving process without needing to wear additional goggles. However, for maximum safety, especially during initial setup or testing, wearing the provided laser protective goggles is recommended.

5.4 Engraving Area and Measurement

The engraver offers a large engraving area of 410x420mm (16.1x16.5 inches). The X-axis and Y-axis are marked with precise scale lines, forming a right-angle measuring ruler. This feature allows for quick and convenient measurement and positioning of your engraving objects.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your SCULPFUN S1 laser engraver.

  • Cleaning the Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
  • Cleaning the Machine: Use the provided brush or compressed air to remove dust and debris from the frame, rails, and moving parts.
  • Belt Tension: Check the tension of the drive belts regularly. They should be taut but not overly tight. Adjust if necessary according to the detailed manual.
  • Lubrication: Apply a small amount of appropriate lubricant to the linear rails periodically to ensure smooth movement.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your machine has the latest features and bug fixes.

7. Troubleshooting

Here are some common issues and their potential solutions:

Problem Possible Cause Solution
Laser not firing or weak output Loose connection, dirty lens, incorrect software settings, laser module failure. Check all cable connections. Clean the laser lens. Verify power settings in your engraving software. Contact support if the issue persists.
Machine not connecting to computer USB cable issue, driver not installed, incorrect COM port selected. Try a different USB port or cable. Install necessary drivers for the engraver. Select the correct COM port in your software.
Poor engraving/cutting quality Incorrect focus, wrong power/speed settings, material issues, dirty lens. Re-focus the laser. Adjust power and speed settings for the specific material. Ensure material is flat and clean. Clean the laser lens.
Machine making unusual noises Loose components, debris on rails, worn belts. Inspect for loose screws or components. Clean debris from linear rails. Check and adjust belt tension.

For more complex issues, please consult the full product manual or contact SCULPFUN customer support.

8. Specifications

Feature Detail
Product Model SCULPFUN S1
Engraving Size 410 x 420 mm (16.1 x 16.5 inches)
Color Blue
Engraving Materials Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, dark stone
Cutting Materials Wood, acrylic board, cardboard, non-woven fabric, bamboo, some plastic board
Laser Effect Power 90W (similar to 90W CO2 laser cutting effect)
Power Consumption 30W
Diode Laser Output Power 5.5 - 6W
Laser Wavelength 455 ± 5 nm
Engraving Accuracy 0.01 mm
Focusing Mode Fixed focus laser + sliding device
Laser Protection Purple filter cover (filters 98% UV)
Operating Software LaserGRBL, LightBurn, Benbox, GrblController, LiteFire
Supported OS Windows, MAC (for LightBurn)
Data Transfer Mode USB connection
Power Supply Input: 100-240V AC, 50/60Hz; Output: 12V 5A
Net Weight 3.0 kg
Packing Weight 4.4 kg
Packing Size 615 x 345 x 130 mm (24.2 x 13.6 x 5.1 inches)
Certifications CE, FCC, RoHS, FDA, ICE

9. User Tips

  • Ventilation is Key: Always operate your laser engraver in a well-ventilated area or use an exhaust system to remove smoke and fumes, which can be harmful and affect engraving quality.
  • Material Testing: Before starting a large project, perform small test engravings on scrap pieces of your chosen material to find the optimal power and speed settings.
  • Software Familiarity: Take time to learn your chosen engraving software (e.g., LightBurn or LaserGRBL). Understanding its features will greatly enhance your engraving results.
  • Keep it Clean: A clean machine, especially the laser lens and rails, will perform better and last longer. Dust and debris can scatter the laser beam and hinder movement.
  • Secure Your Material: Ensure your material is flat and securely fastened to the work surface to prevent shifting during engraving, which can ruin your project.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or contact SCULPFUN customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.