1. Introduction
The Xinyi XY-Y50L is a HIFI grade 50W+50W stereo Bluetooth digital amplifier board module designed for high-quality audio reproduction. It features Bluetooth 5.1 connectivity, user-defined EQ, USB flash drive music playback, and can be controlled via a remote control or a dedicated mobile application (Sinilink APP) for both Android and iOS devices. This manual provides detailed instructions for the proper setup, operation, and maintenance of your amplifier board.
2. Safety Information
- Ensure the power supply voltage is within the specified range (DC 9-24V/5A) to prevent damage.
- Do not expose the device to moisture or extreme temperatures.
- Avoid short-circuiting the speaker outputs or power input.
- Disconnect power before making any connections or performing maintenance.
- Keep out of reach of children.
3. Package Contents
The following items are included in your package. Please check all components upon receipt.

- Top Board
- Main Board
- Bottom Board
- Knob Cap
- M2*4+3mm Screws (4 pcs)
- M2*3 Screws (4 pcs)
- M2*14mm Standoffs (4 pcs)
- DC Plug (5.5-2.5/2.1)
- Screwdriver
- Remote Control
Note: The heat sink has been pre-installed on the main board.
4. Product Overview
The XY-Y50L amplifier board offers versatile audio input options and powerful stereo output. Key features include:
- Bluetooth 5.1: For stable wireless audio streaming.
- EQ User-Defined: Customize your sound profile via the Sinilink APP.
- USB Flash Drive Music List: Play music directly from a USB drive.
- APP Control: Full control via Sinilink APP on Android and iOS.
- Infrared Remote Control: Convenient control from a distance.
- HIFI Grade Audio: Designed for high-fidelity sound.
- Dual Channel Output: 50W + 50W stereo output.
- AUX Input: For wired audio sources.


5. Setup
5.1 Assembly
The amplifier board requires minor assembly. Use the provided screws and standoffs to secure the top and bottom boards to the main board. The heat sink is pre-installed.
5.2 Antenna Connection
Connect the provided SMA antenna to the antenna interface on the amplifier board. Ensure it is securely fastened for optimal Bluetooth range.

5.3 Power and Speaker Connections
Refer to the wiring diagram below for correct connections.

- Power: Connect a DC 9-24V/5A power supply to the 'POWER' input terminals. Ensure correct polarity (+ and -).
- Speakers: Connect your passive speakers to the 'SPEAKERS' output terminals. Connect the Right channel speaker to '+R' and '-R', and the Left channel speaker to '+L' and '-L'. Each channel supports up to 50W.
- AUX Input: For wired audio, connect your audio source (e.g., smartphone, MP3 player) to the 'AUX IN' port.
6. Operating Instructions
6.1 Volume Knob Functions
The multi-function volume knob controls several operations:
- Stepless Tuning / Volume Adjustment: Rotate clockwise to increase volume, counter-clockwise to decrease volume.
- Play/Pause: Click the knob once.
- Next Track: Double-click the knob.
- Power ON/OFF: Long press the knob.
- Switch Play Mode: Three clicks of the knob to cycle between Bluetooth, AUX, and USB flash drive modes.

6.2 Bluetooth Connection
- Power on the amplifier board.
- On your mobile device, turn on Bluetooth and search for available devices.
- Select the device named "XinYi" to connect.
- Once connected, you can play music from your device.

6.3 Sinilink APP Control
Download the Sinilink APP by scanning the QR code (if provided separately) or searching in your app store. The APP allows for advanced control:
- Bluetooth Control: Search and connect to the amplifier board (e.g., "XYV122V30UE") within the Sinilink APP.
- USB Flash Drive Music List: Click the button in the APP to open the USB flash drive music list and select tracks.
- EQ User-Defined: Click the button in the APP to open the equalizer and adjust sound settings.
- Other Functions: Set Bluetooth password, change Bluetooth name, and toggle on/off prompt tones.


6.4 Remote Control
The infrared remote control provides convenient access to various functions:
- Power Button: Turn the amplifier ON/OFF.
- Mode Button: Switch between input modes (Bluetooth, AUX, USB).
- EQ Button: Access equalizer settings.
- Volume Up/Down: Adjust volume levels.
- Previous/Next Track: Navigate through songs.
- Play/Pause: Control playback.
- RPT (Repeat): Repeat current track or playlist.
- USB: Directly switch to USB mode.
- Number Buttons (0-9): (Functionality may vary, typically for direct track selection on USB or preset EQ).
7. Maintenance
- Clean the amplifier board with a soft, dry cloth. Do not use liquid cleaners.
- Ensure proper ventilation around the board to prevent overheating.
- Store the device in a cool, dry place away from direct sunlight and dust.
- Regularly check connections for any loose wires.
8. Troubleshooting
- No Sound:
- Check power connection and ensure the board is turned on.
- Verify speaker connections are secure and correctly polarized.
- Ensure the correct input mode (Bluetooth, AUX, USB) is selected.
- Increase the volume on both the amplifier and your audio source.
- Bluetooth Disconnection/Poor Range:
- Ensure the antenna is securely connected.
- Reduce distance between the amplifier and the Bluetooth device.
- Remove any obstacles that may interfere with the signal.
- Try re-pairing the Bluetooth device.
- USB Flash Drive Not Playing:
- Ensure the USB drive is formatted correctly (FAT32 is common).
- Check that audio files are in supported formats (WAV, FLAC, APE, MP3).
- Try a different USB drive.
- Remote Control Not Working:
- Check the battery in the remote control.
- Ensure there are no obstructions between the remote and the amplifier's IR receiver.
9. Specifications

| Parameter | Value |
|---|---|
| Brand | XIN YI Sini Audio |
| Product Model | XY-Y50L |
| Product Name | Stereo Bluetooth Amplifier Board |
| Power Supply | DC 9-24V/5A |
| Bluetooth Version | 5.1 |
| Audio Output | Stereo/2.0 |
| Audio Input | Bluetooth + AUX + USB Flash Drive |
| Volume Adjustment | 360° Stepless Tuning |
| Audio File Format | WAV FLAC APE MP3 |
| Output Power (4Ω/12VDC) | 20W*2 |
| Output Power (8Ω/12VDC) | 10W*2 |
| Output Power (4Ω/21VDC) | 50W*2 |
| Output Power (8Ω/24VDC) | 30W*2 |
| Protection Mechanism | Over voltage, under voltage, over temperature, DC detection, short circuit protection |
| Unique Function | Support Sinilink-APP + Infrared Remote Control |
| Product Size | 54mm × 47mm × 22mm |
| Product Weight | 48g |
Note: If using 4Ω speakers, the power supply must be under 21V. If using 8Ω speakers, the power supply must be under 24V.
10. User Tips
- For optimal sound quality, ensure your power supply provides stable voltage and sufficient current (5A recommended).
- When using a USB flash drive, organize your music files in a simple folder structure for easier navigation via the APP.
- Experiment with the EQ settings in the Sinilink APP to tailor the sound to your preferences and speakers.
- If experiencing interference, try relocating the amplifier or your Bluetooth source to minimize signal disruption.
11. Warranty and Support
For any issues or questions regarding your Xinyi XY-Y50L amplifier board, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims. Information regarding specific warranty periods or repair services should be obtained from your point of purchase.