Jonsbo HP600

Contents

JONSBO HP600 CPU Cooler Instruction Manual

Model: HP600

1. Product Overview

The JONSBO HP600 is a downward pressure air-cooled CPU radiator designed for efficient heat dissipation in compact PC MINI consoles, especially where radiator height is limited. It features a 66mm overall height, making it suitable for small form factor builds. The cooler utilizes reflow soldering fins and a copper base with 6 high-load heat pipes to ensure optimal thermal performance.

The HP600 is available in two versions: a black standard edition and a white ARGB (Addressable RGB) version, catering to diverse aesthetic preferences for personalized console builds.

Product demonstration video for the JONSBO HP600 CPU Cooler, showcasing both standard and ARGB versions.

JONSBO HP600 CPU Cooler with key specifications

JONSBO HP600 downward pressure radiator, highlighting 6 heat pipes, 800-1800 RPM fan speed, and 120x120x66mm dimensions.

2. Specifications

FeatureSpecification
ModelHP-600
Dimensions (L*W*H)120mm * 120mm * 66mm
Heatpipe SizeΦ6mm * 6 PCS
Fan Dimensions120mm * 120mm * 15mm
Fan Speed800-1800 RPM (±10%)
Fan Air Flow23.46-61.51 CFM (MAX)
Fan Air Pressure0.29-1.71 mmH2O (MAX)
Fan Noise Level18.3-37.2 dB(A) (MAX)
Fan Bearing TypeHydraulic bearing
Fan MTTF≥40000h @25°C
ConnectorPWM 4PIN (Fan), ARGB 3PIN (White fan only)
Rated VoltageFan 12V, LED 5V
Rated CurrentFan 0.22A, LED 0.30A
Power ConsumptionFan 2.64W, LED 1.5W
Scope of Application (CPU Sockets)INTEL: LGA 115X/1200/1700, AMD: AM4/AM5
Product specifications diagram with detailed dimensions

Detailed dimensions of the JONSBO HP600 CPU cooler.

3. Features

  • Compact Design: With an overall height of only 66mm, the HP600 is ideal for MINI-ITX and other small form factor PC cases with limited radiator clearance.
  • High-Performance Heat Pipes: Equipped with 6 pure copper nickel-plated heat pipes and a copper base, ensuring efficient and uniform heat conduction.
  • Advanced Welding Process: Features tower reflow welding for the heat pipes, fins, and base, comparable to tower radiator performance.
  • Efficient Fan: Includes a 12015 PWM 4PIN temperature control fan (High-performance FDB fan for black version) for efficient heat dissipation, temperature control, and speed regulation.
  • ARGB Lighting (White Version): The white ARGB version supports 3PIN 5V ARGB synchronization, allowing control through motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
  • Memory Clearance: Designed with an integrated pressure plate to avoid interference with surrounding MOS tubes and memory modules, ensuring a balanced pressure and better fit for the CPU.
  • Broad Compatibility: Supports a wide range of Intel (LGA 115X/1200/1700) and AMD (AM4/AM5) CPU sockets.
Diagram showing six pure copper nickel-plated heat pipes

Illustration of the six pure copper nickel-plated heat pipes for uniform heat conduction.

CPU cooler design to avoid memory interference

Design showing how the cooler avoids memory interference with an integrated pressure plate for a better CPU fit.

4. Installation Guide

Please follow these steps carefully for proper installation of your JONSBO HP600 CPU cooler. Ensure your system is powered off and unplugged before beginning installation.

4.1 Prepare Your Motherboard

  • Identify your CPU socket type (Intel LGA 115X/1200/1700 or AMD AM4/AM5).
  • Attach the appropriate metal buckle pieces to the motherboard according to your CPU socket. The kit includes various brackets and screws for different platforms.
  • Apply a thin, even layer of thermal paste to the center of your CPU's integrated heat spreader (IHS).
Metal buckle pieces and installation hardware for CPU cooler

Included metal buckle pieces, thermal paste, and screws for Intel LGA 115X/1200/1700 and AMD AM4/AM5 sockets.

4.2 Mount the Cooler

  • Carefully align the HP600 cooler with the mounting holes on the motherboard.
  • Secure the cooler using the provided front fastening screws and horizontal bar buckle. Tighten screws in a diagonal pattern to ensure even pressure.
Easy installation method for JONSBO HP600 CPU cooler

Illustration of the easy installation process using the horizontal bar buckle and front fastening screws.

4.3 Connect Cables

  • Connect the 4PIN PWM fan cable to the CPU FAN header on your motherboard.
  • If you have the white ARGB version, connect the 3PIN 5V ARGB cable to an Addressable RGB header on your motherboard.

Important Tip: The 4PIN temperature control FAN cable should be plugged into the CPU FAN interface of the motherboard. You may need to enter your motherboard's BIOS/UEFI settings to configure relevant settings for optimal heat dissipation and low noise operation.

Diagram showing 12015PWM4PIN fan and BIOS settings tip

Visual representation of the 12015PWM4PIN temperature control fan and a reminder about BIOS settings.

5. Operating Instructions

5.1 Fan Speed Control (PWM)

The HP600's fan supports PWM (Pulse Width Modulation) control, allowing your motherboard to dynamically adjust the fan speed based on CPU temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.

5.2 ARGB Lighting Control (White Version Only)

For the white ARGB version, the 3PIN 5V ARGB connector allows synchronization with compatible motherboard RGB software. This enables you to customize lighting effects and colors to match your system's aesthetic. Refer to your motherboard's manual for specific instructions on ARGB software control.

White ARGB JONSBO HP600 CPU cooler installed in a PC case

The white ARGB version of the HP600 cooler installed, showcasing its lighting capabilities.

6. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your CPU cooler.

  • Dust Removal: Periodically clean the fan blades and heatsink fins to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush.
  • Check Fan Operation: Ensure the fan is spinning freely and quietly. If you notice unusual noises or reduced fan speed, inspect for obstructions or wear.
  • Thermal Paste: While not required frequently, if you remove the cooler for any reason, it is recommended to clean off old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.

7. Troubleshooting

If you encounter issues with your JONSBO HP600 CPU cooler, consider the following:

  • High CPU Temperatures:
    • Ensure the cooler is securely mounted and making good contact with the CPU.
    • Verify that thermal paste was applied correctly and evenly.
    • Check for dust buildup on the heatsink fins and fan blades.
    • Confirm the fan is spinning at an appropriate speed (check BIOS/UEFI settings).
  • Fan Not Spinning:
    • Ensure the 4PIN PWM fan cable is securely connected to the CPU FAN header on the motherboard.
    • Check BIOS/UEFI settings to ensure fan control is enabled and configured correctly.
  • ARGB Lighting Not Working (White Version):
    • Verify the 3PIN 5V ARGB cable is correctly connected to an Addressable RGB header on your motherboard.
    • Ensure your motherboard's RGB software is installed and configured to control the cooler's lighting.
    • Check for any loose connections.
  • Excessive Noise:
    • Check for any cables or obstructions hitting the fan blades.
    • Ensure the fan is securely mounted and not vibrating.
    • Adjust fan speed settings in BIOS/UEFI or software to a lower RPM if temperatures allow.

8. User Tips

Based on general user experiences with CPU coolers:

  • Cable Management: When installing in a small case, careful cable management is crucial to ensure optimal airflow and prevent cables from interfering with the fan.
  • BIOS Settings: Don't forget to check your motherboard's BIOS/UEFI settings after installation. Adjusting the fan curve can significantly impact both cooling performance and noise levels. Many motherboards have preset profiles (e.g., Silent, Standard, Performance) that you can experiment with.
  • Thermal Paste Application: A pea-sized dot or a thin line in the center of the CPU is generally sufficient for thermal paste application. Avoid using too much, as it can reduce efficiency.

9. Warranty and Support

For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.

© 2023 JONSBO. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.