LHY Audio EFI

Contents

LHY Audio EFI Ethernet Filter with Optical Isolation User Manual

Model: EFI

1. Introduction

The LHY Audio EFI (Ethernet Filter with Optical Isolation) is an advanced audio network optoelectronic isolator designed to significantly improve the quality of digital streaming audio and video. In typical home network environments, high-frequency crosstalk and noise interference can degrade the sound and picture performance of streaming devices. The EFI utilizes optical isolation technology and a high-performance linear power supply to effectively eliminate these interferences, resulting in a cleaner, more stable, and accurate network signal.

By converting incoming LAN signals into optical signals, processing them through optical isolation, and then converting them back, the EFI ensures that digital streamers, network bridges, network streaming decoders, and network switches receive a purified signal. This process reduces jitter, enhances detail, improves soundstage, and stabilizes video streams, leading to a noticeable improvement in overall media quality.

2. Key Features

  • Optical Isolation: Provides complete electrical isolation between input and output to eliminate noise.
  • Signal Regeneration & Rebalancing: Ensures signal integrity and stability.
  • High-Performance Linear Power Supply: Features two independent LT3042+PNP circuits providing uV-level linear power to optoelectronic conversion circuits.
  • Advanced Filtering: Multi-stage filtering to eliminate EMI (electromagnetic interference) and RFI (radio frequency interference).
  • Gigabit Network Support: Equipped with 10 Gigabit isolated network sockets.
  • Network Diagnostic LED: Visual indicators for network status.
  • Protection Features: Includes short circuit protection and anti-static surge protection.
  • Adaptive Speed: Supports 10/100/1000 Mbps adaptive network speeds.
  • Seamless Integration: Compact design simplifies system setup and saves space.

3. Setup Guide

This section details how to connect your LHY Audio EFI unit to your audio system.

3.1 Package Contents

Before you begin, ensure all items are present:

  • LHY Audio EFI Unit
  • 1.5-meter Cat6 Network Cable
  • IEC Power Cable (default national standard)

3.2 Identifying Ports

The rear panel of the EFI unit features the following ports:

Rear panel of LHY Audio EFI showing LAN-IN and ISOLATED ports

LAN-IN: This is the front-end network input interface (RJ45 port). It is recommended to connect this port to your network source, such as an optical modem, router, or network switch.

ISOLATED: This is the optoelectronic isolated network output (RJ45 port). It is recommended to connect this port to devices that require a high-quality network signal, such as digital streamers, network bridges, or other audio-related equipment.

3.3 Connection Steps

  1. Power Off Devices: Ensure your router, streaming device, and the EFI unit are all powered off before making any connections.
  2. Connect Network Input: Use the provided Cat6 network cable to connect your router or network switch to the LAN-IN port on the EFI unit.
  3. Connect Network Output: Use another high-quality network cable (not included, or the provided one if you only need one connection) to connect the ISOLATED port on the EFI unit to your audio streaming device (e.g., digital streamer, RPI, network DAC).
  4. Connect Power: Connect the provided IEC power cable to the power inlet on the EFI unit and then to a suitable AC power outlet (110V~240VAC).
  5. Power On: First, power on your router/network switch. Then, power on the EFI unit using its rear panel switch. Finally, power on your audio streaming device.

Below is a typical connection diagram illustrating the setup:

Connection diagram showing router connected to EFI, then EFI to a decoder, amplifier, and speakers.

Diagram Description: This diagram illustrates how the EFI integrates into an audio system. The router connects to the EFI's LAN-IN port. The EFI's ISOLATED port connects to a decoder, which then feeds an amplifier and speakers. This setup aims to purify the network signal before it reaches sensitive audio components.

Advanced connection diagram showing EFI with various network and audio devices

Diagram Description: A more comprehensive connection diagram showing a router connected to the EFI, which then connects to a Raspberry Pi (RPI) streamer/bridge. The RPI can then connect to a DAC, amplifier, and speakers. Other network devices like a Roon Core, NAS, PC, iPad, and phone are also shown interacting with the network, highlighting the EFI's role in purifying the signal for critical audio components.

4. Operating Instructions

The LHY Audio EFI is designed for simple, plug-and-play operation. Once connected as described in the Setup Guide, it operates automatically.

  1. Power Switch: Locate the power switch on the rear panel of the unit. Flip it to the 'ON' position (usually indicated by a vertical line or 'I').
  2. LED Indicator: A small LED indicator on the front panel will illuminate, indicating the unit is powered on and functioning.
  3. Network Activity: The EFI will automatically process the network signal. There are no user-adjustable settings or controls for its filtering function.

The unit is designed to work transparently in your network, purifying the signal without requiring further interaction.

5. Maintenance

To ensure optimal performance and longevity of your LHY Audio EFI unit, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the unit. Avoid using liquid cleaners, aerosols, or solvents, as they may damage the finish or internal components.
  • Ventilation: Ensure the unit is placed in a location with adequate ventilation to prevent overheating. Do not block any ventilation openings.
  • Environmental Conditions: Keep the unit away from direct sunlight, heat sources, excessive dust, moisture, and strong electromagnetic fields.
  • Fuse Replacement: The unit is equipped with a fuse for protection. If the unit fails to power on, check the fuse located in the power inlet on the rear panel. Replace it with a fuse of the same type and rating (FUSE T1.0AL, 100V~240VAC). Always disconnect the power cable before attempting to replace the fuse.

6. Troubleshooting

If you encounter issues with your LHY Audio EFI, please refer to the following troubleshooting steps:

ProblemPossible CauseSolution
Unit does not power onNo power, faulty power cable, blown fuseCheck power cable connection. Ensure power outlet is active. Check and replace fuse if necessary (refer to Maintenance section).
No network signal through EFIIncorrect cable connection, faulty network cable, source device issueVerify network cables are securely connected to LAN-IN and ISOLATED ports. Ensure the router/modem is functioning correctly. Try different network cables.
No noticeable improvement in audio/video qualitySource quality already high, system limitations, placebo effectEnsure the EFI is correctly integrated into the signal path for sensitive audio/video devices. While EFI significantly reduces network noise, the perceived improvement can vary based on the existing system and source material.
Intermittent network connectionLoose connections, network congestion, faulty unitCheck all network cable connections. Restart all network devices (router, EFI, streaming device). If the problem persists, contact support.

7. Specifications

FeatureSpecification
ModelEFI
TypeESP Series
Brand NameLHY Audio (Huo Guang Shu)
OriginMainland China
Standard Network PortRJ45
Optoelectronic Isolated Network PortRJ45
Network ProtocolIEEE 802.3x
Supported Speed10/100/1000 Mbps (Adaptive)
Input Voltage110V~240VAC
Power Consumption6W~7W
Dimensions (W x D x H)155 x 175 x 50mm
Weight1.2 kg
Accessories Included1.5m Cat6 Network Cable, IEC Power Cable
High-concerned chemicalNone

8. User Tips

  • Cable Quality: For optimal performance, consider using high-quality, shielded Ethernet cables for all connections, especially between the EFI and your sensitive audio equipment.
  • Placement: Position the EFI unit away from other electronic devices that might generate electromagnetic interference, such as power supplies, large transformers, or wireless routers, to maximize its noise reduction benefits.
  • System Integration: The EFI is most effective when placed directly before the most sensitive components in your audio chain that receive network signals (e.g., network streamers, DACs with Ethernet input).
  • Power Cycle: If you experience any network issues, a simple power cycle of your router, EFI, and streaming device in sequence (router first, then EFI, then streamer) can often resolve connectivity problems.

9. Warranty and Support

LHY Audio products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.