1. Safety Instructions
Please read this manual carefully before use, and retain it for future reference.
When using the toothbrush for the first time, it is common for the gums to experience itching or slight bleeding, which can be attributed to the fact that your gums have not yet adapted to the efficient cleaning of an electric toothbrush. It is recommended to start with the gentle mode. These conditions will typically be resolved within a period of one to two weeks. In the event that they persist for more than two weeks, please stop using the toothbrush immediately and seek medical assistance.
⚠ WARNINGS:
- The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not expose the appliance or battery to excessive temperatures.
- Be aware of the risk of terminals of the battery-operated appliance or battery being short circuited by metal objects.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children without supervision.
- This appliance contains a battery that is non-replaceable.
- Only charge and use the appliance at a temperature between 5°C and 35°C.
- Please use a compatible and qualified adapter (with an output of 5V-1A) to charge the product.
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
2. Product Overview
The XIAOMI MIJIA Sonic Vibration Electric Toothbrush Pro is designed for effective and intelligent oral care. It features a smart display, multiple cleaning modes, and a long-lasting battery.
Package Contents:
- Toothbrush Handle x1
- Toothbrush Heads x2 (one cleaning, one caring)
- Charging Cable x1 (Type-C)
- User Manual x1
- Quick Start Guide x1
3. Setup
3.1 Installing the Toothbrush Head
Keep the bristle direction of the toothbrush head in the same direction as the front of the toothbrush handle. Align downwards to install the toothbrush head on the handle, and make sure there is a slight gap (0.4-1mm) between the toothbrush head and the handle. This gap is designed to prevent the toothbrush head from colliding with the handle during high-frequency vibration, so as to generate more power from the motor.
3.2 Initial Language Setting
The toothbrush's display can be set to English for easier use. Follow these steps:
- Turn on the toothbrush.
- If the display is in Chinese, press and hold the power button for three seconds to enter the settings interface.
- Navigate through the options using the power button until "English" is displayed.
- Press and hold the power button again to confirm the language selection. The display will show "English Set successfully".
4. Operating Instructions
4.1 Turning On/Off and Switching Modes
- Turning on: Press the power button to turn on the toothbrush.
- Mode Switch/Pause: Within ten seconds of turning on, press the power button to cycle through Gentle, Standard, Deep oscillation, Smart oscillation, and Pause modes. After 10 seconds, press the power button to pause.
- Turning off: After pausing, the toothbrush will turn off automatically after 12 seconds of inactivity.
- Reset: Press and hold the power button for more than 12 seconds to restart the toothbrush.
4.2 Pick-up-to-wake
When the toothbrush is turned off, pick it up manually to wake it up. If this feature is triggered multiple times in a short period, it will be temporarily disabled. It can be reactivated by charging or turning the toothbrush on.
4.3 Cleaning Modes
- Gentle Clean: Suitable for beginners and users with sensitive gums.
- Standard Clean: Ideal for daily oral cleaning.
- Deep Sweep & Vibration: Designed for deep cleaning of hard-to-reach areas like tooth gaps.
- Intelligent Sweep & Vibration: Targeted cleaning for different tooth surfaces.
Note: It is recommended to start with the gentle mode for new users. When the toothbrush is turned on, there is a 3-second gradual power increase function, and the vibration will gradually increase within 3 seconds.
4.4 Healthy Brushing Technique
For better brushing effect, it is recommended to use the Bass brushing method, gently moving the toothbrush with the bristles positioned at a 45° angle towards the gum line. The toothbrush pauses briefly every 30 seconds to prompt the user to change the brushing area.
4.5 Intelligent Interaction Interface
The system's built-in algorithm analyzes recent brushing behavior. The display shows information like near-term dental plaque risk, last brushing coverage, and recent brushing pressure.
Missed Area Reminder: The display provides feedback on the current brushing situation through missed area identification after brushing is paused or completed. Cleaned areas are displayed in white and missed areas in orange. You can achieve better coverage by continuing to brush the orange areas. The duration of supplemental brushing varies depending on the areas missed. Once all missed areas are brushed, the toothbrush will automatically pause and display the brushing results.
Brushing Result Display: The display shows brushing coverage, evaluation, and duration when brushing is paused or completed.
Lift to Wake Screen Feedback: The toothbrush has a built-in algorithm model that analyzes recent brushing behavior. When lifted, the screen awakens, providing timely feedback on brushing habits.
4.6 Smart Overpressure Reminder
When excessive brushing force is detected, the toothbrush provides real-time light reminders and automatically reduces frequency and vibration to protect the gums and prevent damage. This function can be enabled or disabled in the settings menu.
4.7 Travel Lock
The toothbrush supports a travel lock feature to prevent accidental activation during storage or travel. This can be enabled or disabled in the settings menu.
5. Charging
5.1 Charging Method
Open the rubber plug at the bottom of the handle, make sure the charging port is dry, then insert the Type-C charging cable and connect it to a power source. Please place the product in a stable and dry place for charging.
5.2 Battery Status Information
| Toothbrush Status | Battery Level | Screen Display |
|---|---|---|
| Operating | 20%-100% | None |
| Operating | 5%-20% | Low Battery Level (Turning on possible) |
| Operating | < 5% | Low Battery Level (Turning on impossible) |
| Charging | 0-100% | The battery level is displayed for the first 20 seconds after charging, and then goes out. |
Note: It takes about six hours to get the toothbrush fully charged once its battery is depleted.
5.3 Moisture Detection of Charging Port
When connecting the charging cable to the electric toothbrush, if the display shows that the charging port is damp, it indicates the presence of liquid at the charging port. Please ensure the charging port is dry before charging, as it poses a risk of short-circuiting if wet.
If there is any liquid present at the charging port, proceed with the following cleaning steps:
- Unplug the charging cable.
- Keep the charging port downwards and shake gently to drain excess liquid.
- Place the toothbrush and the charging cable in a dry and well-ventilated place for air drying. Once the toothbrush is completely dry, try to recharge it. If the display still shows that the charging port is damp, it is recommended to extend the drying period until normal charging resumes.
CAUTION: Please do not use paper towels, cotton swabs, etc. to dry the charging port to avoid foreign objects from entering.
6. Maintenance
6.1 Cleaning the Toothbrush Head
- After brushing teeth, rinse the toothbrush head with running water.
- After rinsing, shake off water and place the toothbrush head in a dry and well-ventilated area to allow for air drying.
Dentists recommend replacing the toothbrush head every three months. Genuine brush heads are recommended for optimal performance and oral health.
6.2 Environmental Protection and Battery Disposal
When the toothbrush reaches the end of its service life, please remove, dispose of and recycle the built-in battery according to local laws and regulations. If the battery cannot be removed, dispose of it in strict accordance with the regulations on classified domestic waste disposal in your area.
⚠ WARNINGS:
- Do not expose the battery to fire to prevent the battery from exploding or releasing toxic and hazardous substances.
- Do not short-circuit the battery to prevent it from combusting and causing a fire.
- Do not disassemble the toothbrush unless you want to dispose of it; otherwise, the toothbrush will be damaged.
- Before disposing of the toothbrush, remove the battery first.
- The battery must be removed from the appliance before it is scrapped.
- The appliance must be disconnected from the supply mains when removing the battery.
- The battery is to be disposed of safely.
Removing the Rechargeable Battery:
- Insert a flat screwdriver into the gap between the handle's bottom cover and the toothbrush body, and pry upward until the bottom cover opens.
- Use a flat screwdriver to pry the buckles inwards on both sides of the inner compartment, press the front power shaft against a hard object, and push the inner compartment out of the toothbrush.
- Use a diagonal cutter to cut off the battery connection wires. Remove the battery and deposit it at an official recycling point.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Toothbrush does not turn on. | Toothbrush is charging. | Unplug the charging cable from the toothbrush. |
| Battery level is too low. | Charge the battery in a timely manner. | |
| Ambient temperature is too high or too low. | Use in room-temperature environment. | |
| System crashed. | Press and hold the power button for more than 12 seconds to restart. | |
| Toothbrush head cannot be installed. | Foreign objects inside the toothbrush head. | Remove foreign objects. |
| Foreign objects on the shaft. | Remove foreign objects. | |
| Non-genuine toothbrush head is used. | Replace with a genuine toothbrush head. | |
| Toothbrush head vibration is weak. | Toothbrush head not installed in place. | Reinstall the toothbrush head. |
| Something stuck between the toothbrush head and the handle. | Detach the toothbrush head and remove the foreign objects. | |
| Display shows charging port is damp during charging. | Moisture at the charging port. | Unplug the charging cable, then air dry or wipe the charging port. |
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | Electric Toothbrush |
| Model | MES610 |
| Rated Power | 2.5W |
| Rated Input | 5V=1A |
| Charging Time | Approx. 6 hours |
| Waterproof Level | IPX8 |
| Bristle Stiffness | Medium |
| Number of Operating Modes | 4 or more |
| Number of Nozzles | 2 |
| Type | Acoustic Wave |
| Material | ABS |
| Commodity Quality Certification | 3C, CE |
| Age | Adults |
9. Warranty and Support
As a Xiaomi consumer, you benefit from additional warranties under certain conditions. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website: www.mi.com/global/support/warranty.
For further information or to download the full user manual (PDF), please refer to the official product page or the provided PDF link: User manual (PDF).
10. User Tips
- To ensure the display is in your preferred language, remember to set it to English during initial setup by pressing and holding the power button.
- The product comes with two brush heads. Ensure you use genuine Xiaomi brush heads for optimal performance and to avoid potential damage to teeth or gums.
