ENJOYWOOD Aluminum Alloy Table Saw Fence System

1. Introduction

This manual provides detailed instructions for the safe and effective use of your ENJOYWOOD Aluminum Alloy Table Saw Fence System. Designed for precision and stability, this fence system enhances the capabilities of your table saw, band saw, circular saw, or router table, ensuring accurate cuts and improved workflow in your woodworking projects. Please read this manual thoroughly before assembly and operation.

2. Specifications

3. Package Contents

Please verify that all items listed below are included in your package:

• 1 x Aluminum Alloy Fence (915mm length)
• 2 x Pallets
• 2 x Sets of Quick Release Pressure Plate Clamps
• 2 x Auxiliary Pressure Plate Pads
• 1 x Stainless Steel Ruler (12.5 x 1500mm)
• 4 x Square Nuts

4. Setup Instructions

Follow these steps to set up your ENJOYWOOD Table Saw Fence System:

1. Attach the Fence: Secure the main aluminum alloy fence to your table saw, band saw, or router table. Ensure it is parallel to the blade/bit and firmly clamped.
2. Install Pressure Plates: Assemble the quick-release pressure plates. Insert the T-screw into the appropriate slot on the fence, closest to the original support of your machine.
3. Position Auxiliary Pads: Press one end of the pressure plate onto an auxiliary pad and the other end onto the original support. Tighten the handle to secure the pressure plate, providing enhanced stability.

5. Operating Instructions

5.1 Basic Operation

1. Positioning the Fence: Loosen the quick-release clamps and slide the fence to the desired position for your cut.
2. Locking the Fence: Once positioned, tighten the quick-release clamps firmly to secure the fence. Ensure there is no movement before making a cut.
3. Adjusting the Backrest: Move the backrest of the fence to fit snugly against the saw blade and lock it in place. This ensures consistent material support.

5.2 Zero Scale Adjustment

After adding any backing or making significant adjustments, you may need to readjust the zero scale for accurate measurements.

• If there is sufficient space, adjust the existing zero scale.
• If space is limited, you can paste a new scale on top. Use the upper scale for the enhanced backing and the lower scale for the original backing.

5.3 Using Pallets for Extension

The included pallets can be used to extend the working surface, especially when working with longer materials.

1. On a Table Saw: Place the long wood on the pallet. This effectively extends the table saw's surface, allowing for smoother and more stable feeding of long workpieces.
2. On a Band Saw: The front and rear ends of the backer can be fitted with pallets to provide additional support for materials.

6. Maintenance

• Cleaning: Regularly wipe down the aluminum fence and stainless steel ruler with a clean, dry cloth to remove sawdust and debris. For stubborn residue, use a mild cleaner and ensure it is completely dry afterward.
• Lubrication: Periodically check the quick-release clamp mechanisms. If they become stiff, apply a small amount of dry lubricant to ensure smooth operation.
• Inspection: Before each use, inspect all components for any signs of wear, damage, or loose fasteners. Ensure all clamps and nuts are securely tightened.
• Storage: Store the fence system in a dry environment to prevent corrosion, especially on the stainless steel ruler.

7. Troubleshooting

• Fence not holding position: Ensure the quick-release clamps are fully tightened. Check for any debris obstructing the clamping mechanism or the surface it's clamping to.
• Inaccurate cuts: Verify that the fence is parallel to the blade/bit. Re-calibrate the zero scale if necessary, especially after adding or removing backings. Ensure the material is held firmly against the fence during the cut.
• Difficulty sliding the fence: Clean the tracks and the bottom of the fence to remove any sawdust or buildup. A light application of dry lubricant can also help.

8. User Tips

• Always perform a test cut on scrap material to verify fence alignment and accuracy before cutting your final workpiece.
• When working with delicate materials, consider adding a sacrificial fence face to prevent damage to the aluminum fence.
• For repetitive cuts, mark your fence position with a pencil or a stop block for quick and consistent setup.

9. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.