1. Product Introduction
The Orca Torch D710V MK2 is an updated underwater video light designed for divers and underwater photographers who demand versatility and high performance. With a powerful 2300-lumen output and an ultra-wide 120° flood beam, it delivers uniform, shadow-free illumination with no blind spots, ensuring stunning clarity in every shot.
The D710V offers effortless operation with three specialized light modes:
- Neutral White: Delivers crisp, natural lighting for vibrant underwater scenes.
- Red Light: Perfect for photographing shy marine life without causing disturbance.
- UV Light: Enhances fluorescent night diving by illuminating biofluorescent organisms—no extra filters needed.
The new-generation MK2 version features upgraded white light brightness and adds two UV light sources, delivering a brighter and superior lighting experience.
Video: Overview of the ORCATORCH D710V MK2 features and underwater use.
2. What's in the Box
The ORCATORCH D710V MK2 Double Combo Kit includes the following items:
- OrcaTorch D710V MK2 Diving Light x 2
- 21700 USB-C rechargeable 5000mAh battery x 2
- H02 Camera Tray x 1
- ZJ12 Handle x 1
- ZJ13 Ball Joint Clamp x 1
- USB-C charging cable x 2
- ZJ18 Ball Joint Bracket x 2
- Lanyard x 2
- Spare O-ring x 6
- User manual x 2

Image: Visual representation of the items included in the packing list.
3. Technical Specifications
The ORCATORCH D710V MK2 features robust construction and advanced lighting capabilities:
- Triple LED: White (2300 lumens), Red, UV
- 120° Wide Beam: No blind spots, ideal for video
- Battery: 1x21700 Li-ion Battery with USB-C charging
- Depth Rating: 150m
- Material: Rugged A6061-T6 aluminum, toughened glass
- Smart Features: Side titanium switch, battery indicator, safe lock, overheat & reverse polarity protection
Performance Data (per ANSI/NEMA FL1 standards)
| Modes | White | Red | UV | |
|---|---|---|---|---|
| Output | High: 2300 Lumens | Low: 750 Lumens | High: 150 Lumens | High: 10 Lumens |
| Runtime | 1h 20mins | 2h 40mins | 4h 10mins | 2h 30mins |
| Impact Resistant | 1.5m | |||
| Working Voltage | 2.8V-4.2V | |||
| Dimension | 154.9mm (Length) x 27mm (Tube) x 36mm (Head) | |||
| Net Weight | 146g / 0.32lb (Excluding Battery) | |||
| Accessories | 1* 21700 Li-ion rechargeable Battery, USB-C Charging Cable x 1, ZJ18 Ball Joint Bracket x1, Spare O-ring x 3, Lanyard x 1 | |||
Notice: All performance data is measured per ANSI/NEMA FL1 standards using an OrcaTorch 21700 Li-ion battery (3.6V, 5000mAh) in controlled lab conditions. Real-world results may vary due to battery differences, environmental factors, or individual unit variations.

Image: Detailed technical parameters table.

Image: Diagram showing the compact design, dimensions, and material of the D710V MK2.
4. Setup
4.1 Battery Installation
- Unscrew the tail cap of the flashlight.
- Insert the 21700 Li-ion battery with the anode side (+) toward the light head.
- Screw the tail cap back on securely.
Important: For first-time use, please remove the battery insulating sticker. Do not reverse battery polarity to avoid damage to the flashlight and battery. Do not use batteries with higher voltage than the flashlight's working voltage or with damaged surfaces/deformation.

Image: Visual guide for battery installation, showing the correct orientation of the 21700 5000mAh Li-ion rechargeable battery.
4.2 Charging the Battery
The included 21700 Li-ion battery features a built-in USB-C charging port. Connect the USB-C charging cable to the battery and a power source to charge. The LED indicator on the battery will show its charging status.

Image: Diagram illustrating the USB-C charging process and LED indicators (Red for charging, Green for fully charged).
4.3 Assembling the Camera Tray and Brackets
The D710V MK2 comes with a ZJ18 ball joint bracket for mounting. Attach the flashlight to the ZJ18 ball joint, and then connect it to the H02 Camera Tray and ZJ12 Handle using the ZJ13 Ball Joint Clamps as needed for your underwater photography setup.

Image: Illustration of the D710V MK2 with the ZJ18 ball joint bracket and other optional accessories like the camera tray and handle.
5. Operation Instructions
5.1 Mode Selection
Press the side button to cycle through the lighting modes in the following order:
High White → Low White → Red → UV → Off
To turn off the light instantly from any mode, long-press the side button.

Image: Visual representation of the White, Red, and UV light modes and their respective lumen outputs.

Image: Examples of multiple application scenarios for White, Red, and UV light modes, including fluorescent night diving, detection, night diving, shy animal observation, and catching lobsters.
5.2 Battery Indicator
When the flashlight is on, the LED indicator at the side switch displays the remaining battery levels in real-time:
- Green: Battery level ≥ 40%
- Red: Battery level 10% - 40% (recharge soon)
- Flashing Red: Battery level < 10% (critical, replace/charge immediately)

Image: Diagram showing the power level display with Green, Red, and Flashing Red indicators.

Image: Illustration highlighting the titanium switch button, operational safety lock, and battery status indicator.
5.3 Safe Lock Function
The safe lock function prevents accidental activation during transport or storage.
- To Lock: Hold the side button for 5 seconds when the torch is off. The white light will flicker twice to indicate it is locked.
- Locked State: In the locked state, a single click will not activate the light; the battery indicator will show green when the side button is pressed.
- To Unlock: Double-press the side button. The light will flicker twice, indicating it is ready for use.

Image: Diagram explaining the switch locking design to prevent accidental startup and extend run-time.
5.4 Overheat Protection
The D710V MK2 is designed for underwater use. Operating it on land for extended periods may cause overheating. To prevent damage, the light will automatically dim if its temperature reaches 65°C.
5.5 Runtime Optimization
Using the light intermittently, rather than continuously on its highest setting, can significantly extend battery life and overall runtime.
6. Usage and Maintenance
- Cleaning: After each use, especially in seawater, clean the surface of the light with fresh water and wipe it dry to prevent corrosion.
- Avoid Sand: Do not drop or place the light on sand to prevent iron sand from sticking to or entering the switch section or screw threads.
- Pre-Dive Check: Tighten all connections of the light before going underwater to ensure a proper seal.
- Battery Storage: Take out the batteries after each diving session. If the flashlight will not be used for a long time, remove the batteries to avoid damage from electrolyte leakage or battery explosion.
- O-Ring Care: Replace O-rings if they are damaged after prolonged use. Regularly lubricate the O-rings with silicone grease to prevent erosion and maintain the flashlight's waterproof seal.
- No Disassembly: Do not disassemble the sealed head. Doing so may cause damage to the flashlight and will void the warranty.
7. Troubleshooting
If your light flickers or does not light up, consider the following:
- Reason A: The batteries need to be replaced.
Solution: Replace batteries. Ensure correct installation of positive (+) and negative (-) terminals. - Reason B: The threads, PCB board contact, or other contacts are dirty.
Solution: Clean the contact points with an alcohol-soaked cotton swab.
If the methods above do not resolve the issue, please contact the distributors or OrcaTorch customer support.
8. User Tips
- Always fully charge your batteries before a dive to ensure maximum runtime and consistent performance.
- When using the light for macro photography, experiment with the red light mode to avoid startling marine life and capture more natural shots.
- For fluorescent night diving, allow your eyes to adjust to the darkness before activating the UV light for the best viewing experience.
9. Safety Warnings and Disclaimer
The flashlight is a high-intensity lighting device and capable of causing eye damage. Please avoid shining the light directly into the eyes.
To ensure your safe use of this product, please carefully read and adhere to the following warnings and disclaimer:
9.1 Warnings
- Keep Out of Reach of Children: This flashlight should be stored out of reach of children. Children are strictly prohibited from using this flashlight to prevent accidents.
- Avoid Direct Eye Exposure: Do not shine the flashlight directly into the eyes. The intense light may cause irreversible damage to the eyes. Maintain a safe distance when using the flashlight.
- Avoid Close Proximity to Flammable Objects: Do not use the flashlight in close proximity to flammable materials. The flashlight generates high temperatures during operation, which may cause objects to ignite, posing a safety hazard.
- Prohibit Unconventional Use: Do not use the flashlight in unconventional ways, such as holding it in your mouth. Malfunctions of the flashlight or its internal battery may result in personal injury or life-threatening situations.
- Be Aware of Temperature: The flashlight generates significant heat during operation, and the surface may become very hot. Be cautious to avoid burns and do not touch the surface of the flashlight while in use.
- Avoid Placement in Enclosed or Flammable Environments: When storing the flashlight in enclosed spaces such as pockets or backpacks, ensure it is turned off and the switch is locked, to prevent accidental activation. Avoid using the flashlight near flammable materials.
- Non-Replaceable Light Source: The light source of this flashlight is not replaceable. When the light source reaches the end of its lifespan, replace the entire flashlight. Do not attempt to replace the light source yourself to ensure safety.
9.2 Disclaimer
Orca Torch Technology Co., Ltd shall not be held responsible for any loss, injury, or accident resulting from improper use, misuse, or failure to follow the above safety guidelines. Users must strictly adhere to these safety instructions to ensure their own safety and the safety of others. If you have any questions or are unsure about the proper use of the flashlight, please contact the manufacturer or a professional for advice.
10. Warranty and Support
10.1 Product Warranty
OrcaTorch will replace products afflicted with manufacturing defects within 30 days of purchase. We will repair a light free of charge within 12 months of purchase if problems develop under normal use. If repair is required after 12 months from the date of purchase, we will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
Please register your OrcaTorch products through the official website www.orcatorch.com to get an extra 1-year warranty.
10.2 Contact Information
ORCATORCH TECHNOLOGY LIMITED
- Tel: +86-755-33560383
- Fax: +86-755-29454989
- Email: info@orcatorch.com
- Website: www.orcatorch.com
- Address: 4th Floor, Building 6, Huafeng Science and Technology Park, 535 Fengtang Avenue, Fuyong, Bao'an District, Shenzhen, China (518103)
Scan the QR Code to visit the Official Website for more information and product registration.