1. Product Overview
The Papifeed Smart Timing Automatic Pet Feeder is designed to provide scheduled meals for your pets, ensuring they are fed consistently and on time. It features a user-friendly interface, dual power options, and a detachable stainless steel bowl for hygiene.
Components:
- Lid with dry bag compartment
- Food Hopper (4.5L capacity)
- LCD Display Screen
- Main Frame
- Dispensing Outlet
- Stainless Steel Bowl
- Bowl Holder
- AC Power Adapter (US Plug Type)
- User Manual
2. Setup Instructions
Follow these steps to set up your Papifeed Automatic Pet Feeder:
- Unpack and Inspect: Carefully remove all components from the packaging. Ensure all parts listed in the Product Overview are present and undamaged.
- Assemble Bowl Holder: Attach the bowl holder to the main frame of the feeder.
- Insert Stainless Steel Bowl: Place the stainless steel bowl into the bowl holder.
- Connect to Power Supply:
- AC Power: Connect the provided AC adapter to the feeder's power input and plug it into a standard US electrical outlet.
- Battery Backup (Optional): For power outage protection, insert 4 x D-Cell batteries (not included) into the battery compartment located at the bottom of the feeder. This ensures continuous operation in case of AC power loss.
- Fill Food Hopper: Open the lid and pour dry pet food into the food hopper. The feeder has a 4.5L capacity. Ensure the food kibble size is between 5-10mm to prevent jamming.
- Close Lid: Securely close the lid to maintain food freshness and prevent spills.
3. Operating Instructions
The Papifeed Automatic Pet Feeder features an LCD display and intuitive controls for easy programming.
Programming Meals:
The feeder allows you to set up to 4 daily distribution alarms and dispense from 1-9 portions per meal. Each portion is approximately 10g.
- Access Menu: Use the control buttons (typically labeled 'Menu' or with icons) to navigate the LCD display.
- Set Time: Adjust the current time on the feeder to ensure accurate meal scheduling.
- Set Meal Times: For each of the 4 available meal slots, set the desired feeding time.
- Set Portion Size: For each meal, select the number of portions (1-9) to be dispensed. Each portion is approximately 10g.
- Save Settings: Confirm and save your programming. The feeder has a failsafe recovery system that memorizes your previous programming automatically.
Manual Feeding:
Most automatic feeders include a manual feed button for immediate dispensing of a single portion. Refer to the LCD display and button layout for this function.
4. Maintenance
Regular cleaning and maintenance will ensure the longevity and hygienic operation of your pet feeder.
- Cleaning the Stainless Steel Bowl: The stainless steel feeding bowl is detachable and can be easily removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry before reattaching.
- Cleaning the Food Hopper: Periodically empty the food hopper and wipe it clean with a dry or slightly damp cloth. Ensure it is completely dry before refilling with food.
- Cleaning the Dispensing Outlet: Check the dispensing outlet regularly for any food residue or blockages. Use a small brush or cloth to clear any debris. The strong impeller and sloppy design are intended to prevent food from getting stuck.
- Battery Check: Monitor the voltage indicator on the LCD display. Replace D-Cell batteries when the indicator shows low power to ensure continuous operation during power outages.
5. Troubleshooting
- Feeder not dispensing food:
- Check if the food hopper is empty.
- Ensure the power adapter is securely connected or batteries are properly installed and charged.
- Verify that the food kibble size is within the recommended 5-10mm range. Larger kibble may cause blockages.
- Check the dispensing outlet for any obstructions.
- Display not working:
- Ensure the feeder is powered on and connected to a power source.
- If using batteries, check their charge level and replace if necessary.
- Food getting stuck:
- Confirm that the food kibble size is appropriate (5-10mm).
- Clean the dispensing mechanism and impeller to remove any accumulated residue.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | PF023 |
| Brand Name | Papifeed / YTYIN |
| Capacity | 4.5 Liters |
| Material | ABS Plastic, Stainless Steel (bowl) |
| Power Source | DC 6V 1A (AC Adapter) + 4x D-Cell Batteries (not included) |
| Rated Voltage | DC 6V 1A |
| Plug Type | US |
| Min Output | 50g |
| Max Output | 500g |
| Time Setting | Yes |
| LCD Display | Yes |
| Is Smart Device | Yes |
| Suitable for | Cats, Dogs, Small Animals |
| Weight | 2.1 KG |
| Packaging Size | 210*210*342mm |
| Certificates | CE, ROHS, FCC |
7. User Tips
- Always ensure the lid is securely closed after refilling the food hopper to maintain food freshness and prevent pests.
- For optimal performance and to prevent food jams, use dry kibble within the recommended size range of 5-10mm.
- Regularly check the battery indicator, especially if you rely on battery backup, to ensure uninterrupted feeding schedules.
8. Warranty and Support
For any questions, technical support, or warranty claims regarding your Papifeed Automatic Pet Feeder, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
