Introduction
This manual provides detailed instructions for setting up and operating your KCEVE 8K KVM Switch. This device allows you to control multiple computers with a single set of keyboard, mouse, and monitor(s), streamlining your workspace and enhancing productivity. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Available Models
The KCEVE KVM Switch is available in two main configurations:
1. 4 IN 2 OUT Model
This model allows you to connect up to four computers to two monitors and share a single set of USB 3.0 devices (keyboard, mouse, etc.). It supports both Duplicate and Extended display modes.
2. 4 IN 1 OUT Model
This model allows you to connect up to four computers to one monitor and share a single set of USB 3.0 devices (keyboard, mouse, etc.), including a 3.5mm audio jack for headphones or microphones.
Specifications
| Feature | Detail |
|---|---|
| Brand | AIMOS / KCEVE |
| Model Number | KCEVE-842 |
| Type | KVM Switch USB 3.0 |
| Video Standard | HDMI 2.1 |
| Video Resolution (Max) | 8K@60Hz, 4K@144Hz/120Hz |
| USB Ports | 4 x USB 3.0 (5Gbps data transfer) |
| Audio | 3.5mm Audio Jack (4-in-1-out model only) |
| EDID Emulator | Yes |
| Switching Methods | Physical Button, Wired Remote Control (1.5m) |
| Compatibility | Windows (10/8.1/8/7/XP/Vista), Mac OS, Linux, Chrome OS, PS5, Desktops, Laptops |
| Power Supply | DC 12V Power Adapter (Included) |
| Dimensions | 8.03 x 5.98 x 2.52 inches |
| Weight | 0.85 lbs |
| Certification | CE, FCC, RoHS |
Package Contents
- 1x KVM Switch Unit (4-in-1-out or 4-in-2-out model)
- 4x USB 3.0 Cable (1.5m)
- 1x Power Adapter (DC 12V)
- 1x Wired Remote (1.5m)
- 1x User Manual (this document)
Note: HDMI cables are NOT included and must be purchased separately. Ensure you use high-quality HDMI 2.0/2.1 cables (less than 1.5m for optimal 8K/4K@144Hz performance).
Setup Instructions
General Connection Diagram
- Power Connection: Connect the included DC 12V power adapter to the KVM switch and then to a power outlet.
- Monitor Connection:
- For 4 IN 2 OUT Model: Connect your two monitors to the "MONITOR A" and "MONITOR B" HDMI output ports on the KVM switch.
- For 4 IN 1 OUT Model: Connect your single monitor to the "MONITOR" HDMI output port on the KVM switch.
- PC Connection (Video & USB): For each computer (PC1, PC2, PC3, PC4) you wish to connect:
- For 4 IN 2 OUT Model: Connect two HDMI cables from your PC's HDMI output ports to the corresponding "HD A" and "HD B" input ports on the KVM switch (e.g., PC1's HDMI outputs to HD 1A and HD 1B). Then, connect one USB 3.0 cable from your PC's USB port to the corresponding "USB" input port on the KVM switch (e.g., PC1's USB to USB 1).
- For 4 IN 1 OUT Model: Connect one HDMI cable from your PC's HDMI output port to the corresponding "HD" input port on the KVM switch (e.g., PC1's HDMI output to HD 1). Then, connect one USB 3.0 cable from your PC's USB port to the corresponding "USB" input port on the KVM switch (e.g., PC1's USB to USB 1).
Important: Ensure all necessary HDMI and USB cables are connected for each PC. Incorrect or incomplete connections are a common cause of display issues.
- Peripheral Connection: Connect your keyboard, mouse, and any other USB 3.0 devices (e.g., printer, U-disk) to the USB 3.0 ports on the front panel of the KVM switch.
- Audio Connection (4 IN 1 OUT Model only): If using the 4 IN 1 OUT model, connect your headphones or microphone to the 3.5mm audio jack on the KVM switch.
- Wired Remote Control: Connect the wired remote control to the "Control" port on the KVM switch for convenient switching.
Specific Connection for 4 IN 2 OUT Model
For the 4 IN 2 OUT model, each computer requires two HDMI connections and one USB connection to the KVM switch:
- PC1: HD 1A + HD 1B + USB 1
- PC2: HD 2A + HD 2B + USB 2
- PC3: HD 3A + HD 3B + USB 3
- PC4: HD 4A + HD 4B + USB 4
Pre-purchase check: Ensure your computer's graphics card supports direct connection of two HDMI monitors to function correctly with this KVM switch.
Operating Instructions
Switching Between Computers
You can switch between connected computers using one of the following methods:
- Front Panel Buttons: Press the corresponding PC1, PC2, PC3, or PC4 button on the front panel of the KVM switch to select the desired computer. An LED light will indicate the active computer.
- Wired Remote Control: Use the included 1.5m wired remote control to switch between computers.
Note: Keyboard hotkey switching is NOT supported by this KVM switch.
Display Modes (4 IN 2 OUT Model)
The 4 IN 2 OUT model supports two display modes:
- Duplicate Mode (Copy Mode): Both connected monitors will display the same image from the selected PC.
- Extended Mode: The desktop of the selected PC will be extended across both connected monitors, allowing you to drag windows between them. To activate Extended Mode, use the "Windows + P" keyboard shortcut on your PC and select "Extend".
EDID Emulator Function
The KVM switch features an EDID emulator in each input port to ensure that your computers always maintain correct display information when switching. This prevents window rearrangement and resolution changes.
- Toggle EDID Function: To turn the EDID function ON or OFF, press and hold the "PC1" button on the KVM switch for 3-5 seconds until the EDID indicator blinks constantly.
- Restore Factory Settings: To restore the EDID to factory settings, press and hold the "PC2" button on the KVM switch for 3-5 seconds.
Audio Output (4 IN 1 OUT Model)
For the 4 IN 1 OUT model, audio can be transmitted to the monitor via the HDMI port or to external headphones/microphones connected to the 3.5mm audio jack. You can select your preferred audio output channel on your computer.
Maintenance
- Keep the KVM switch in a cool, dry place away from direct sunlight and heat sources.
- Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ensure all cables are securely connected to prevent signal loss or intermittent issues.
- Avoid placing heavy objects on top of the KVM switch.
Troubleshooting
- No Display / Flickering Screen / White Screen / Black Screen:
-
- Cable Quality: Unstable display is often caused by low-quality HDMI cables. Ensure you are using high-quality HDMI 2.0 or HDMI 2.1 cables, especially for 8K or 4K@144Hz resolutions. Keep cable lengths under 1.5 meters for optimal performance.
- Incorrect Connection: Verify that all HDMI and USB cables are correctly and securely connected for each PC. For the 4 IN 2 OUT model, each PC requires two HDMI cables and one USB cable.
- Resolution Support: Confirm that your computer's graphics card, monitors, and HDMI cables all support the desired resolution (e.g., 8K@60Hz or 4K@144Hz).
- KVM Reset: If the KVM switch is not working correctly, turn off the switch on the front panel, wait 2-3 seconds, and then turn it back on.
- Only One Video Output Works (4 IN 2 OUT Model):
-
- This is typically due to incorrect wiring. Double-check that each computer has two HDMI cables and one USB cable connected to the KVM switch as per the setup instructions.
- Ensure your computer's graphics card is capable of outputting to two monitors simultaneously.
- Windows Rearrange / Resolution Changes After Switching:
-
- The EDID emulator should prevent this. If it occurs, try toggling the EDID function OFF and then ON again by holding the "PC1" button for 3-5 seconds.
- If issues persist, try restoring EDID factory settings by holding the "PC2" button for 3-5 seconds.
- USB Devices Not Recognized:
-
- Ensure the USB 3.0 cables from your PCs are securely connected to the KVM switch.
- Verify that the KVM switch is receiving adequate power from the DC 12V power adapter.
- Try connecting the USB device directly to the computer to confirm it's functioning.
User Tips
- Cable Management: Invest in good cable management solutions to keep your workspace tidy and prevent accidental disconnections, which can lead to display issues.
- High-Quality Cables: Always use certified high-quality HDMI 2.0/2.1 and USB 3.0 cables, especially for high-resolution setups, to ensure stable signal transmission.
- Power Cycle for Issues: If you encounter any unexpected behavior, a quick power cycle (turning the KVM off and on) can often resolve minor glitches.
- Direct Connection Check: Before troubleshooting KVM-specific issues, ensure your computers and monitors work correctly when connected directly without the KVM switch.
- Router vs. KVM: Remember that a KVM switch is for sharing physical peripherals (keyboard, mouse, monitor) between computers, not for network sharing via a router.
Warranty and Support
The KCEVE KVM Switch comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Please have your model number (KCEVE-842) and purchase information ready when contacting support.