Introduction
Thank you for choosing the Joyroom CB3 Bluetooth 5.4 Car Adapter. This device is designed to enhance your in-car audio experience by providing seamless wireless connectivity for music streaming and hands-free calling. Featuring advanced Bluetooth 5.4 technology, dual microphones with ENC noise cancellation, and intuitive controls, the JR-CB3 ensures a stable, clear, and enjoyable journey.
Package Contents
Please check the package for the following items:
- Wireless Receiver (JR-CB3)
- Adhesive Pad (x2)
- User Manual & Warranty Card

Image: Joyroom CB3 Wireless Receiver with USB and AUX cables.
Product Diagram
Familiarize yourself with the components of your JR-CB3 Wireless Receiver:

Image: Close-up of the receiver's buttons and TF card slot, illustrating various functions.
- Microphone
- Volume Up button (+)
- Previous Track button (<<)
- TF Card Slot
- Pause/Play/Call button
- Volume Down button (-)
- Turn On/Off Atmosphere Light button
- Next Track button (>>)
Setup
Mounting the Receiver
- Remove the protective film from one of the adhesive pads.
- Stick the adhesive pad firmly onto a clean, flat surface on your car's dashboard.
- Place the wireless receiver onto the adhesive pad.
Connecting to Your Car Audio System
- Insert the USB connector of the receiver into a power supply (e.g., car USB port or car charger). The light ring will illuminate, indicating the receiver is turned on.
- Plug the 3.5mm audio cable of the receiver into the 3.5mm AUX port of your car audio system.

Image: The Joyroom CB3 receiver connected via USB and AUX in a car dashboard.
Bluetooth Pairing
- Turn on your phone's Bluetooth function.
- Search for the Bluetooth device named "JR-CB3" in your phone's Bluetooth settings.
- Click on "JR-CB3" to pair and connect with it.
- Once successfully connected, you can start using the receiver to enjoy music or answer calls.

Image: Step-by-step diagram illustrating USB/AUX connection and Bluetooth pairing on a smartphone.
Friendly Tip:
It takes only 1 second to complete pairing. There is no need to repeat pairing after the first successful connection with your device, as the receiver supports automatic reconnection.
Video: Product demonstration showing installation, music playback, call handling, and automatic reconnection.
Operation Instructions
1. Power On/Off
- Turn On: The receiver will turn on automatically once connected to a power source.
- Turn Off: The receiver will turn off automatically once disconnected from the power source.
2. Atmosphere Light Control
- Turn On/Off: Press and hold the atmosphere light button for 3 seconds to toggle the light on or off.
- Automatic Shut-off: The atmosphere light will turn off automatically if the device is not connected to a phone for 10 minutes.
3. Music Function
- Play/Pause: Click the Pause/Play button (center button).
- Volume Up: Click the '+' button.
- Volume Down: Click the '-' button.
- Previous Track: Click the 'Previous' button (<<).
- Next Track: Click the 'Next' button (>>).
4. Voice Assistant
- Activate: Press and hold the Call button for 2 seconds, then release after hearing a "di-di" sound.

Image: Driver interacting with the device for hands-free calling and voice assistant.
5. Call Function
- Answer Call: Click the Call button.
- End Call: Click the Call button.
- Reject Call: Press and hold the Call button for 2 seconds.
- Redial Last Number: Double-click the Call button.
6. Factory Reset
- Reset: While the device is turned on, press and hold the '+' and '-' buttons simultaneously for 5 seconds.
Indicator Instructions
- Ready for Pairing: The light ring flashes slowly in breathing mode.
- Pairing Success: The light ring remains steadily on.
Prompt Tone Instructions
- Turn On: "doo-doo-doo" sound in rising tone.
- Turn Off: "doo-doo-doo-doo" sound in falling tone.
- Connected: "doo-der" sound.
- Disconnected: "doo-doo-doo" sound in falling tone.
- Call Reminder: Synchronizes with the ringtone for iOS systems; for Android systems, it will play a "doo-doo-doo" sound if the ringtone cannot be synchronized.
Specifications
| Feature | Specification |
|---|---|
| Name | Wireless Receiver |
| Model | JR-CB3 |
| Bluetooth Version | 5.4 |
| Audio Decoding | SBC |
| Supported Protocols | HSP, HFP, A2DP, AVRCP |
| Supported Modes | Bluetooth, TF card |
| Transmission Range | ≤12m (approx. 39 ft) |
| Frequency Response Range | 20Hz-20kHz |
| Mic Sensitivity | -38±2dB |
| Product Input | 5V ⎓ 1A |
| Input Port | USB+AUX |
| Product Size | 40.5 mm x 45.7 mm x 11.4 mm |
| Product Material | ABS+PC |
| Net Weight | 40 g |
| Noise Cancellation | Dual Mics ENC Noise Cancellation, CVC8.0 Technology, Noise Filter IC (up to 35dB reduction) |
| Certification | CE, FCC, RoHS, BQB |

Image: Comparison table highlighting features of Joyroom Bluetooth 5.4 vs generic Bluetooth 5.0.
Troubleshooting (FAQ)
Q: Why can't the receiver be connected?
A:
- It may be that the receiver has been connected to another device (such as a computer or mobile phone). Please disconnect it from the previous device and attempt to reconnect.
- For iPhone users, since the iPhone's Bluetooth does not have an automatic refresh function, you may need to manually click "JR-CB3" on the Bluetooth interface to connect.
- If the above operations fail, you can try to restore the receiver to factory settings (refer to Operation Instructions > Factory Reset).
Q: Why is the sound of the receiver too low?
A:
- If you are an Android user, the playback channel of the mobile phone might not be turned on. Please go to your phone's Bluetooth settings, click the icon on the right side of the connected earphones, and turn on the "media channel and call channel".
- If you are an iPhone user, please open your phone's "Settings" interface and check if there is a maximum volume limit enabled on the phone.
- Due to different operating systems across various phones, the volume of the receiver may not be synchronized with the volume of your phone or car audio. Please manually adjust the volume on your mobile phone, the receiver, and the car audio system independently.
Q: Why can't the receiver be turned on when connected to power?
A:
- The USB charging port and cable may not be connected properly. Please pull the cable out and plug it in again repeatedly to ensure it is well inserted.
- Ensure you are using adapters or car chargers that conform to national/regional safety standards to supply power for the product. Adapters with excessive power or those not supporting PD protocol (as the product does not support PD) may be incompatible.
User Tips
- Optimal Placement: For best call clarity and control, mount the receiver at eye level on your dashboard. This allows for easier access to buttons and reduces distractions while driving.
- Noise Reduction: The JR-CB3 features advanced ENC Call Noise Reduction, capable of reducing noise by up to 35dB. Ensure the microphones are not obstructed for optimal performance during calls.
- Dual Device Connectivity: The receiver supports connecting to two devices simultaneously. This is convenient for switching between personal and work phones without re-pairing.
- Media Playback Flexibility: In addition to Bluetooth streaming, the JR-CB3 supports TF card playback, offering more options for your in-car entertainment.
Safety Guidelines
To ensure safe and proper use of your Joyroom CB3 Wireless Receiver, please adhere to the following guidelines:
- Do not disassemble or refit the product for any reason. Unauthorized modifications may lead to malfunction, damage, or fire.
- Do not immerse the product in any liquid or wash it with water.
- Always use power adapters and charging cables that comply with national and regional safety standards. Using incompatible or excessively powerful adapters may damage the product's battery or pose safety risks.
- Operate and store the product within normal temperature ranges (between 0°C and 45°C). Avoid exposing it to extremely low or high temperatures.
- Do not block any openings on the product, such as the charging port, audio port, or microphone. Blockages can affect performance and lead to overheating.
- Avoid using the product during thunderstorms. This can lead to abnormal performance or signal interruption.
Warranty and Support
The Joyroom CB3 Wireless Receiver comes with a warranty as detailed in the included Warranty Card. For any issues or support, please refer to the contact information provided in your warranty documentation or visit the official Joyroom support website.
For additional information and FAQs, you may scan the QR code provided in the original user manual or visit support@joyroom.com.
A detailed user manual in PDF format is available for download: Joyroom CB3 User Manual (PDF)