Hawkeye Captain X 10.2 inch FPV Monitor

1. Introduction

The Hawkeye Captain X 10.2 inch FPV Monitor is a high-performance display designed for First Person View (FPV) applications with drones and other remote-controlled vehicles. Featuring a 10.2-inch high-resolution screen, built-in DVR, dual receivers, and multiple input options including HDMI, this monitor provides a clear and reliable video feed for an immersive FPV experience. This manual will guide you through the setup, operation, and maintenance of your Captain X FPV Monitor.

2. Safety Information

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

• Always ensure proper ventilation around the monitor during operation.
• Avoid exposing the monitor to extreme temperatures, direct sunlight for prolonged periods, or moisture.
• Use only the provided or recommended power sources and cables.
• Do not attempt to disassemble or repair the monitor yourself. Refer to qualified service personnel.
• Keep the monitor away from strong magnetic fields.

3. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.

• 1 x Hawkeye Captain X 10.2 inch FPV Monitor
• 1 x Female XT60 plug to male DC Connector Cable
• 1 x 3.5mm Connector Cable
• 2 x 5.8G Antennas
• 1 x Mounting Bracket

4. Product Overview

The Hawkeye Captain X FPV Monitor is designed for optimal performance and ease of use in FPV applications. Key features include:

• High Brightness: 1000 Lux for clear outdoor visibility.
• Built-in DVR: Record your FPV flights directly on the monitor.
• Dual Receivers: For enhanced signal reception and stability.
• Wide Frequency Support: Supports 4.9G, 5.8G, 6G, and 1.2G bands (specific bands may vary by model/version).
• High Resolution: 1024x600 HD LED screen.
• Low Latency: Less than 19ms for real-time video feedback.
• Multiple Inputs: HDMI and AV input options.
• No Black/Blue Screen: Ensures continuous video display even with weak signals.
• On-board Playback: Review recorded footage directly on the monitor.
• OSD Display: Real-time display of working status.

Monitor Components

5. Setup Guide

Follow these steps to set up your Hawkeye Captain X FPV Monitor:

1. Attach Antennas: Screw the two provided 5.8G antennas onto the SMA connectors located on the back of the monitor. Ensure they are securely fastened.
2. Mount the Monitor: Attach the monitor to the included mounting bracket. This bracket can typically be mounted on a tripod or other compatible stand.
3. Power Connection: Connect the Female XT60 plug to male DC Connector Cable to the DC input port on the side of the monitor. Connect the XT60 end to a compatible DC 3S-6S battery (not included).
4. Insert SD Card (for DVR): If you plan to use the DVR function, insert a formatted SD card into the SD card slot on the side of the monitor.
5. Connect Video Source:
   • FPV Receiver: If using an external FPV receiver, connect its video output to the AV input on the monitor using the 3.5mm Connector Cable.
   • HDMI Device: For high-definition input, connect an HDMI cable from your source device to the HDMI input port.
6. Power On: Flip the power switch on the side of the monitor to the 'ON' position.

6. Operating Instructions

1. Power On/Off: Use the power switch on the side of the monitor to turn the device on or off.
2. Auto Channel Search: The monitor features an auto channel search function. Press the designated button (refer to on-screen prompts or physical buttons) to automatically scan for available FPV frequencies and lock onto the strongest signal.
3. DVR Function:
   • Recording: Once a signal is acquired and an SD card is inserted, press the record button to start recording. Press it again to stop.
   • Playback: Access the menu to navigate to the playback function. Select your recorded files for on-board review.
4. OSD Display: The On-Screen Display (OSD) provides real-time information about the monitor's working status, including battery voltage, signal strength, and selected channel.
5. Input Switching: If you have multiple video sources connected (e.g., FPV receiver via AV and a ground station via HDMI), use the input selection button to switch between them.
6. Menu Navigation: Use the menu buttons (usually a combination of directional buttons and an 'OK' button) to adjust settings such as brightness, contrast, aspect ratio, and DVR options.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the monitor screen and body. For stubborn smudges, a slightly damp cloth with a mild, non-abrasive cleaner can be used, but ensure no liquid enters the device.
• Storage: When not in use, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging or a protective case.
• Battery Care: If using an external battery, follow the manufacturer's guidelines for charging, discharging, and storage to prolong its lifespan.
• Antennas: Handle antennas with care to avoid bending or damaging them. Ensure they are properly connected before each use.

8. Troubleshooting

• No Signal/Poor Reception:
  • Ensure antennas are securely attached and oriented correctly.
  • Perform an auto channel search to find the strongest signal.
  • Verify that your FPV transmitter is powered on and operating on a compatible frequency.
  • Check for obstructions between the transmitter and receiver.
  • If using a 1.2G version, ensure your FPV system is compatible with that frequency. The monitor supports various bands (4.9G, 5.8G, 6G, 1.2G) depending on the specific model/version.
• No Video on Screen:
  • Check all cable connections (AV, HDMI, power).
  • Ensure the correct input source is selected on the monitor.
  • Verify the FPV camera and transmitter are functioning correctly.
• DVR Recording Issues:
  • Ensure an SD card is inserted and properly formatted (FAT32 is usually recommended).
  • Check if the SD card has sufficient free space.
  • Verify the SD card is not locked (read-only).
• Monitor Not Powering On:
  • Check the battery connection and ensure the battery is charged.
  • Verify the power switch is in the 'ON' position.

9. Specifications

10. User Tips

• Frequency Bands: The Hawkeye Captain X monitor is available in different versions supporting various frequency bands, including 4.9G, 5.8G, 6G, and 1.2G. Always ensure your FPV transmitter's frequency matches your monitor's capabilities for optimal performance.
• Outdoor Visibility: The 1000 Lux brightness is excellent for outdoor use. For best viewing in very bright conditions, consider using a sun shade (not included) to reduce glare.
• DVR Storage: Regularly check the free space on your SD card to avoid interruptions during recording. Back up important footage to another device.

11. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or authorized distributor where you purchased the Hawkeye Captain X FPV Monitor. Please retain your proof of purchase for warranty purposes.