1. Introduction
The UGREEN BT503 is a versatile 2-in-1 Bluetooth 5.3 audio adapter designed to seamlessly integrate wireless audio into your daily life. It functions as both a Bluetooth transmitter (TX) and a Bluetooth receiver (RX), allowing you to connect non-Bluetooth devices to Bluetooth headphones/speakers, or stream audio from your Bluetooth-enabled devices to non-Bluetooth audio systems. Featuring aptX HD and aptX Adaptive codecs, it delivers high-fidelity, low-latency audio for an enhanced listening experience.
2. Package Contents
Please check the package for the following items:
- UGREEN BT503 Bluetooth Audio Adapter
- Integrated 3.5mm Audio Cable
- USB-C Charging Cable
- User Manual (this document)
3. Product Overview
Familiarize yourself with the device's components and display indicators.
Key Features and Indicators:
- Volume Level: 16-level adjustable.
- Mode Indicator: Displays current operating mode (RX/TX).
- Bluetooth Name: Shows the device's Bluetooth name (UGREEN-BT503).
- Connected Devices: Lists currently connected Bluetooth devices.
- Codecs: Indicates the active audio codec (e.g., aptX-HD).
- Battery Level: Displays remaining battery percentage.
- 3.5mm Audio Jack: For connecting to audio sources or output devices.
- Function Button (OK): Multi-functional button for pairing, answering calls, etc.
- Slide Switch (RX/OFF/TX): To select operating mode or power off.
- USB-C Charging Port: For charging the device.
- Microphone: For voice calls in RX mode.
- Reset Hole: For factory reset (use a pin).
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | UGREEN |
| Model | BT503 |
| Wireless Type | Bluetooth |
| Bluetooth Standard | v5.3 |
| Bluetooth Profile | A2DP/AVRCP/HSP/HFP |
| RX Codecs | SBC/AAC/aptX/aptX HD |
| TX Codecs | SBC/aptX/aptX HD/aptX Adaptive |
| Frequency Response | 20Hz-20kHz |
| Audio Port | 3.5mm |
| Charging Port | USB-C |
| Battery Type | Polymer lithium-ion battery |
| Battery Capacity | 300mAh 3.7V |
| Limited Charging Voltage | 5.25V |
| Charging Time | About 2 hours |
| RX mode Operating Time | About 32 hours |
| TX mode Operating Time | About 28 hours |
| Max. RF Output Power | 4dBm (EIRP) |
| Support Apt-x | Yes |
| Support AAC | Yes |
5. Setup
5.1 Charging the Device
Before first use, fully charge the UGREEN BT503. Connect the provided USB-C charging cable to the USB-C port on the device and a standard USB power adapter (not included). The device will take approximately 2 hours to fully charge.
5.2 Power On/Off
- To Power On: Slide the switch to either the 'TX' or 'RX' position. The screen will light up.
- To Power Off: Slide the switch to the 'OFF' position. The screen will turn off.
6. Operating Modes
The UGREEN BT503 operates in two distinct modes: Transmitter (TX) and Receiver (RX).
6.1 Transmitter (TX) Mode
In TX mode, the adapter transmits audio from a non-Bluetooth device (e.g., TV, airplane entertainment system, gym equipment) to Bluetooth headphones, earbuds, or speakers.
Example Use Cases:
- Watching TV with Bluetooth headphones.
- Using wireless earbuds with an airplane's in-flight entertainment.
- Connecting to gym equipment with a 3.5mm audio jack.
6.2 Receiver (RX) Mode
In RX mode, the adapter receives audio from a Bluetooth-enabled device (e.g., smartphone, tablet, computer) and outputs it to a non-Bluetooth audio system (e.g., car stereo, home amplifier, wired speakers).
Example Use Cases:
- Streaming music from your phone to your car's audio system.
- Turning wired speakers into Bluetooth speakers.
- Connecting your tablet to an amplifier.
7. Pairing Instructions
7.1 Pairing in TX Mode (Connecting to Headphones/Speakers)
- Slide the switch to the 'TX' position.
- Connect the 3.5mm audio cable from the adapter to the audio output of your non-Bluetooth device (e.g., TV, airplane jack).
- Put your Bluetooth headphones or speaker into pairing mode.
- On the UGREEN BT503, double-click the 'OK' button to enter pairing mode. The screen will display 'Pairing'.
- The adapter will search for nearby Bluetooth devices. Once your headphones/speaker appear on the screen, single-click the 'OK' button to select and connect.
- Once connected, the screen will show the connected device's name, and 'Pairing completed' will be displayed.
7.2 Pairing in RX Mode (Connecting to Phone/Tablet)
- Slide the switch to the 'RX' position.
- Connect the 3.5mm audio cable from the adapter to the audio input of your non-Bluetooth audio system (e.g., car AUX, wired speakers).
- The UGREEN BT503 screen will display 'Pairing'.
- On your Bluetooth-enabled device (e.g., smartphone), go to Bluetooth settings and select 'UGREEN-BT503' from the list of available devices.
- Once connected, the screen will show the connected device's name, and 'Pairing completed' will be displayed.
7.3 Dual Device Pairing (TX Mode)
The UGREEN BT503 supports connecting to two Bluetooth headphones/speakers simultaneously in TX mode.
- Follow steps 1-3 from '7.1 Pairing in TX Mode' to connect the first device.
- Once the first device is connected, put your second Bluetooth headphones or speaker into pairing mode.
- On the UGREEN BT503, double-click the 'OK' button again to enter pairing mode for the second device.
- Select the second device from the list on the screen using the 'OK' button.
- Both devices will now be connected, allowing two people to listen to the same audio source wirelessly.
7.4 Dual Device Pairing (RX Mode)
The UGREEN BT503 supports connecting to two Bluetooth-enabled devices (e.g., two smartphones) simultaneously in RX mode. However, it only supports music playback from one device at a time.
- Follow steps 1-3 from '7.2 Pairing in RX Mode' to connect the first device.
- Once the first device is connected, double-click the 'OK' button on the UGREEN BT503. The screen will display 'Pairing'.
- On your second Bluetooth-enabled device, go to Bluetooth settings and select 'UGREEN-BT503'.
- Both devices will now be connected.
Note: It only supports music playback on one device at a time. If you need to switch to the 2nd device for playback, please turn off the audio source of the first device.
8. Call Handling (RX Mode)
When in RX mode and connected to a smartphone, the UGREEN BT503's built-in microphone allows you to handle calls.
- Answer/End Call: Single-click the 'OK' button.
- Reject Call: Press and hold the 'OK' button for 2 seconds.
9. User Tips
- Switching Audio Sources (RX Dual Pairing): If you have two phones connected in RX mode, remember that only one can play audio at a time. To switch, pause playback on the first device before starting on the second.
- Optimal Latency: For the best low-latency experience, ensure both your transmitting and receiving devices support aptX Low Latency (aptX LL) or aptX Adaptive codecs.
- Airplane Use: The compact design and long battery life make this adapter ideal for in-flight entertainment systems. Simply plug into the 3.5mm jack and connect your wireless headphones.
- Car Audio: Easily upgrade your car's audio system to Bluetooth by plugging the adapter into the AUX input and pairing your phone.
10. Troubleshooting
- Device won't power on: Ensure the battery is charged. Connect to a power source using the USB-C cable.
- Cannot pair with a device:
- Ensure the adapter is in the correct TX or RX mode.
- Make sure the target device (headphones/speaker/phone) is in pairing mode.
- Check that the adapter is within the Bluetooth range of the target device.
- Try restarting both the adapter and the target device.
- If issues persist, use a pin to press the reset hole on the adapter.
- No sound or poor audio quality:
- Verify that the 3.5mm audio cable is securely connected to both the adapter and the audio source/output.
- Check the volume levels on both the adapter and the connected audio device.
- Ensure no other Bluetooth devices are interfering with the connection.
- Confirm that the correct audio input/output is selected on your external audio system (e.g., AUX input on car stereo).
- Connection drops frequently:
- Reduce the distance between the adapter and the connected Bluetooth device.
- Avoid obstacles (walls, large metal objects) that may block the signal.
- Ensure there are no strong Wi-Fi or other wireless signals nearby causing interference.
11. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in use for extended periods.
- Avoid Water: This device is not waterproof. Keep it away from water and moisture.
12. Warranty and Support
UGREEN products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer support directly. Please retain your proof of purchase for warranty claims.