1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your VKAUTO Canbus Dynamic Trajectory Parking Backup Camera. This camera system is designed to enhance your vehicle's safety by providing a clear rear view with dynamic parking guidelines when reversing. It is specifically compatible with VW Jetta MK6 and Passat models from 2016-2017 equipped with MIB2 MQB head units.
2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | VKAUTO |
| Fit Model | For VW Jetta MK6 Passat 2016 2017 |
| Guiding Line | Yes (Dynamic Trajectory) |
| Lens Material | Glass |
| Length of Video Cable | 6M |
| Wire or Wireless | Wired |
| Alarm Type | Vehicle Backup Cameras, ACCESSORIES, Rear Side |
| Viewing Angle | 170° |
| Waterproof Rating | IP69 |
| Certification | CE |
| Origin | Mainland China |
3. Package Contents
Please verify that all items listed below are included in your package:
- 1 x VKAUTO Rear View Camera (designed for trunk handle installation)
- 1 x Wiring Harness
- 1 x 6-meter Video Cable
- 2 x Installation Removal Tools (keys)
- 1 x Electrical Tape
4. Setup and Installation
Important Safety Notice: All devices are to be installed only by highly skilled specialists. All installations, upgrades, and other actions with your car electronics should be carried out at your own risk. VKAUTO Store is not liable for any damage or incorrect operation of the equipment in the case of improper installation.
The camera is designed for installation in the vehicle's trunk handle. Ensure your vehicle is compatible with the camera system and that your MIB2 MQB head unit supports a backup camera input.
4.1 Compatibility Check
This camera system is designed for VW Jetta MK6 and Passat models from 2016-2017. Before installation, confirm that your vehicle's head unit is an MIB2 MQB unit. The product does not provide camera function activation or upgrade services (e.g., VCDS/Forscan coding for Sync/ELM327 for Renault R-link2). Activation of the camera function in your car's system may be required after physical installation.
4.2 General Installation Steps (Professional Installation Recommended)
- Disconnect Battery: For safety, disconnect the vehicle's battery before beginning any electrical work.
- Remove Trunk Handle: Carefully remove the existing trunk handle assembly. The included removal tools may assist with this.
- Install Camera: Integrate the VKAUTO camera into the trunk handle housing.
- Route Wiring: Route the video cable and power wiring from the trunk handle area through the vehicle's interior to the location of the MIB2 MQB head unit. Ensure cables are secured and not pinched.
- Connect to Head Unit: Connect the video cable and power harness to the appropriate inputs on your MIB2 MQB head unit. Refer to your vehicle's specific wiring diagrams if necessary.
- Reconnect Battery: Once all connections are secure, reconnect the vehicle's battery.
- Test Functionality: Engage reverse gear to test the camera's functionality. If no image appears, refer to the Troubleshooting section.
- Activate Camera Function: It may be necessary to activate the backup camera function within your vehicle's head unit software using diagnostic tools. This service is not provided with the product.
5. Operating Instructions
Once correctly installed and activated, the VKAUTO Dynamic Trajectory Camera operates automatically when the vehicle is shifted into reverse gear.
- Automatic Activation: The camera display will automatically appear on your MIB2 MQB screen when reverse gear is engaged.
- Dynamic Trajectory Lines: The camera provides dynamic parking guidelines that bend and move in real-time according to your steering wheel input, assisting you in parking maneuvers.
- Clear Rear View: The wide 170° viewing angle provides a comprehensive view of the area behind your vehicle.
6. Maintenance
To ensure optimal performance and longevity of your camera system, follow these simple maintenance guidelines:
- Regular Cleaning: Periodically clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
- Check Connections: If you experience intermittent issues, check all wiring connections to ensure they are secure and free from corrosion.
- Avoid Harsh Chemicals: Do not use harsh chemicals or solvents near the camera or wiring, as this can damage components.
7. Troubleshooting
If you encounter issues with your VKAUTO camera system, refer to the following common problems and solutions:
- No Image on Display:
- Ensure all wiring connections are secure.
- Verify that the camera function is activated in your vehicle's head unit settings (may require diagnostic tools).
- Check the power supply to the camera.
- Confirm compatibility with your specific vehicle model and head unit.
- Distorted or Unclear Image:
- Clean the camera lens.
- Check for any damage to the video cable.
- Ensure proper voltage supply to the camera.
- Dynamic Lines Not Working:
- Verify that your head unit and vehicle system support dynamic trajectory features.
- Ensure all CANbus connections are correctly made.
- Compatibility Issues:
- This product is designed for VW Jetta MK6 and Passat 2016-2017 with MIB2 MQB units. It may not be compatible with other models or model years (e.g., VW Polo 2015, Jetta GLI 2012 MK6). Purchasing the wrong model product will incur return and replacement costs for the buyer.
8. User Tips
- Verify Compatibility: Always double-check your vehicle's exact model, year, and head unit type (MIB2 MQB) before purchasing to ensure full compatibility.
- Professional Installation: Due to the complexity of vehicle electronics, professional installation is highly recommended to avoid damage and ensure correct functionality.
- System Activation: Be aware that after physical installation, your vehicle's head unit may require software activation or coding to recognize and display the backup camera feed. This is typically done with specialized diagnostic tools.
9. Warranty and Support
9.1 Warranty Information
All VKAUTO camera systems are tested to ensure proper functionality before shipping. Each item comes with a 1-year warranty from the date of purchase.
The warranty will not cover damage resulting from:
- Improper installation, accident, misuse, abuse, improper wiring, or incorrect voltage operation.
- Undue wear & tear, dirt, neglect.
- Any damages caused by improper packaging when returning the item.
- Disassembly or repair by unauthorized personnel.
If the buyer purchases an incorrect model product, the buyer will be responsible for the costs associated with return and replacement.
9.2 Support
For any questions or support needs regarding your VKAUTO camera system, please contact the seller directly. Providing clear pictures or videos of any issues can help expedite the support process.
